Learn how Craftsman Tool Boxes are Made from start to finish in the USA! In this video we get a shipment of steel coils then cut the steel so it can be pressed into the shapes for a drawer and for the tool box itself. Then the metal is welded together to create the main structure of the box and each individual drawers. Finally the box and drawers goes to paint which uses an electrophoresis coating which is better than powder coating. And then on the final assembly line, the drawers are mounted into the box and it's all packaged and shipped out to a store near you. Tool Box we made: https://www.craftsman.com/products/cmst98273rb How Brake Pads are Made: https://youtu.be/H1WXlHONorw 0:00 My New Garage 1:22 Craftsman Factory 2:29 Delivery of the Raw Steel 4:51 Stamping the Sheet Metal 6:38 Roll Forming the Front of the Drawer 7:55 Brake Bending the Metal 8:59 Welding the Drawer Together 9:54 Building the Main Box 13:09 Painting the Tool Box 16:07 Assembling and Packing the Tool Box 18:49 Delivery of my Tool Box Thank you @craftsman and all the factory workers for making this possible! → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

The Turbo Del Sol project has been abandoned for years but now it's time to get her off jack stands and take her out of the storage unit and get her back on the road. In this video I show you how to remove odors from your car after a flood, fix a bad fuel pump, fix seized drum brakes, and then we take the car to the drag strip and dyno to put down some numbers before adding the turbocharger. Where to search for your own budget project car: http://www.autotempest.com/s/CarsFS Lithium Battery (with build in Jump-start): https://antigravitybatteries.com/help-center/battery-finder/ Odor Eliminator: https://amzn.to/4gtamDk ChrisFix Funnel: https://www.jerseydiscounttool.com/chrisfix Torque Wrench: https://amzn.to/3Bm5xwG Battery Load Tester: https://amzn.to/4gm2zHu 00:00 Intro 0:51 Inspecting a project car before purchase 2:50 How to replace a head gasket 4:11 How to repair a rust hole 4:42 How to paint valve covers 5:26 How to install a kill switch 6:38 How to rebuild front suspension 11:00 How to dry a flooded car 13:10 How to test and replace a bad car battery 15:19 How to replace a fuel pump 20:00 How to fix sticking brakes 21:43 Filling up with fresh fuel 23:23 Drag strip quarter mile 1/4mi 25:24 Dyno run for stock horsepower numbers 26:55 All the parts I will install (turbo, brakes, short shifter, etc) → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to hard wire a dash camera and rear camera in your car or truck. All modern cars have airbags and many people run the power wires to the dash camera incorrectly which can be dangerous. In this video I show you how to hardwire a dash camera in a truck and do a clean install using the factory cigarette lighter adapter in a car so all of the wires are hidden. Budget Friendly Dash Cam: https://amzn.to/3ABPEBg Discount code at checkout: QEBGTPOH Top of the Line Dash Cam (w/ Rear Cam): https://amzn.to/3MgxqYB Discount code at checkout: 4JGDW5KG High Endurance Memory Card: https://amzn.to/3AozR8S Hardwire Kit: https://amzn.to/4dJo03G OBD2 Power Adapter: https://amzn.to/3Atn850 Polarizer Filter: https://amzn.to/46NKVZx 30ft Power Cable: https://amzn.to/3X8OFl9 Tape Wire Holders: https://amzn.to/3SRWAAG Multimeter: https://amzn.to/3yIk4RS Flush Cutters: https://amzn.to/46MitY1 Mini Pry Bar: https://bit.ly/MiniPryBar @LinusTechTips review video: https://youtu.be/4AnyhHl3_tE?si=M1Pg8jlPQ7LC5XJ2 @TheHookUp review video: https://youtu.be/lzdxCOvPq5Q?si=4gyfPZniKf8M-2Lr → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

What's the best first car? Today I will show you what I think the best first car is and how to COMPLETELY maintain your first car perfectly. From how to change the oil, transmission fluid, and flush the coolant to hard wiring a dash camera and do a complete brake job. Where to find an inexpensive first car: http://www.autotempest.com/s/CarsFS PLEASE DONATE to help other families if you can: https://help.buildinghomesforheroes.org/campaign/chrisfix-2023/c481763 Car Maintenance Checklist: https://bit.ly/MaintainCheckList Bluetooth Car Scanner: http://amzn.to/1XNUGfz Automatic Jumpstart Lithium Battery: https://antigravity.llc/cfxyt Affordable Dash Camera: https://amzn.to/3T1HkjN Dash Camera Hardwire Kit: https://amzn.to/3P2vc0S ChrisFix Ratchets: https://amzn.to/3VbFGwQ Check your car for Recalls: https://www.nhtsa.gov/recalls 0:00 Intro 2:47 What is the best first car 6:24 How to tint your car's windows 9:43 How to scan your car's computer (OBD2) 14:26 How to change engine oil and filter 16:30 How to change transmission fluid 19:23 How to change antifreeze coolant 24:11 How to change spark plugs 27:41 How to check and replace a car battery 29:59 How to replace engine air filter 30:40 How to replace a turbo charger 33:53 How to replace windshield wipers 35:30 How to replace a cabin air filter 37:00 How to hard wire a dash camera 40:28 How to clean intercooler for more power 42:21 How to install brake pads and rotors 46:36 How to check your tires 48:12 How to check car for recalls 50:30 How to stop your steering wheel from vibrating 51:10 SURPRISING the Family with a New Car!!! 55:19 Please help out! → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

ChrisFix Children’s Books: https://amzn.to/471bngK 1. ChrisFix Neck Lights: https://bit.ly/ChrisFixNeckLight Stick Light w/ Wireless Charger: https://amzn.to/3GG5JpA 2. Wilton Hitch Vice: https://amzn.to/41p1Ui3 Cheap Hitch Vice: https://amzn.to/3RIXT3J Overdrive Wrenches: https://low.es/3tfmF39 3. FLIR One Edge: https://amzn.to/3GLe1wc Long Wrench Extender: https://amzn.to/41v0O4s Ratchet Wrench Extender: https://bit.ly/WrenchExtender 4. Vacuum Fluid Extractor: https://amzn.to/47UpAx6 Oil Mat: https://amzn.to/3RpWJJV 5. Viper Chairs:https://bit.ly/VyperChairs Oil Drain Pan: https://amzn.to/46UkRKE The Other Christmas Gift Idea videos I did: 1st year: https://www.youtube.com/watch?v=esMSQ8iF924 2nd year: https://www.youtube.com/watch?v=3-PZ4gE5o14 3rd year: https://www.youtube.com/watch?v=EOeOZPiF8qY 4th year: https://www.youtube.com/watch?v=DvcpqCPQ3uI 5th year: https://www.youtube.com/watch?v=2K9i_RTAV7E 6th year: https://www.youtube.com/watch?v=vYv4QAqRwBw 7th year: https://www.youtube.com/watch?v=yBmV_u7vNCw 0:00 Intro 0:42 ChrisFix Children's Book How to Change Oil in a Car 2:08 ChrisFix 300lm Neck Light 6:34 Astro LED Stick Light 8:35 Wilton Hitch Vice 11:41 Wrench Extenders 14:09 FLIR One Edge Pro 17:58 Craftsman Overdrive Wrench Set 20:22 Vacuum Fluid Extractor 22:58 Oil Spill Mat 23:56 Vyper Chair 25:59 Oil Drain Pan 28:05 Conclusion → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace axle seals on a solid rear axle that is leaking gear oil. You will know the axle seals are bad because gear oil will drip down the tires and sling everywhere. Luckily with this video you can see the process of replacing the axle seals. First you need to drain the differential. Next you need to unscrew the 4 nuts holding in the axle. Then you need to use a slide hammer to pop the axle out and now you have access to the seal. Use a seal puller tool to pop the seal out and then drive the new one in with a large socket or a seal driver tool. Now would be a good time to replace the rear wheel bearing as well and to do that you need to cut the bearing in half to remove it and then use a pipe with a hammer (or a hydraulic press) to press the new one on. Donut Media Collab: https://youtu.be/AuuQdQXnTaw?si=jae15LApv76YTow0 Craftsman Overdrive Socket Set: https://bit.ly/CraftsmanSocketSet Craftsman Overdrive wrench set: https://bit.ly/CraftsmanWrenchSet Torque Wrench: https://amzn.to/3Q4ndju Sledge Hammer: https://amzn.to/45NROrE Slide Hammer: https://amzn.to/46Q9cNF Seal Puller Tool: https://amzn.to/493hW4J Plier Set: https://amzn.to/3Sb15a5 0:00 How to tell if the axle seals are bad 1:47 Tools needed to replace axle seal 2:37 How to Lift Vehicle 3:32 How to Drain Differential Gear Oil 4:43 How to Remove Axle 6:53 How to Use a Slide Hammer 7:54 How to Replace Seal 10:37 How to Replace Drum Brakes 12:05 Reinstall Everything 13:59 Axle Seal Replacement Summary 14:50 How to Fill Differential with Gear Oil 15:44 Conclusion → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to install an e85 conversion kit aka flex fuel kit in your car. Running on e85 vs gasoline has some benefits like lower fuel prices, more horsepower, and less emissions. It is very simple to install a conversion kit in a compatible car. All you need is to install the flex fuel sensor which goes in-line with the fuel line, then connect some wires to your fuel injectors, and finally plug it all into a piggy-back ECU so it can make adjustments to the fuel injectors. It is that simple to convert your car into a flex fuel car! e85 Conversion Kit: https://eflexfuel.com/ Extendable Ratchets: https://amzn.to/3Yzgrq9 Hose Grip Pliers: https://amzn.to/3OFLH3j Hose Cutter: https://amzn.to/3OGycQL Fuel Line Removal Tool: https://amzn.to/3OGyqY7 Multimeter: https://amzn.to/3YqjsJe Wire Loom Protector: https://amzn.to/47f3h5q 00:00 Benefits of running e85 02:27 How to check if your car is compatible with a flex fuel kit 02:48 Tools and products you need 05:48 How to install the ethanol sensor 07:16 How to remove the wiper shroud 13:29 How to rig fuel line connectors 19:47 How to wire fuel injectors for e85 24:43 How to run wires and install E85 ECU 27:54 Starting her up for the first time 29:29 Wiper cowl install 32:20 Filling up with e85 → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to repair the hybrid battery in a generation 3 Prius 2010-2015 so you can get your Prius back on the road. If you are getting a "check hybrid system" notification or P0A80, P3011, P3012, P3013 codes that means the hybrid battery is failing. Not only are we replacing the hybrid battery but we are upgrading it to new cylindrical cells that give you more power and have lower resistance so your regenerative braking can charge up the batteries quicker. Upgraded Hybrid Battery Cells: http://bit.ly/UpgradedHybridCells Entire Swap out Battery: http://bit.ly/EntireSwapBatteryPack OBD2 Scanner: http://amzn.to/1XNUGfz Permatex Epoxy: https://amzn.to/3ncdmhl Threadlocker: https://amzn.to/3oRqHfC Extendable Ratchet Set: https://amzn.to/3VbFGwQ Panel Clip Removal Tool: https://amzn.to/3AzmoIj Torque Wrench: https://amzn.to/3HiBPZ9 Ft-lbs Torque Wrench: https://amzn.to/3LBxRxs Battery Air Filter: http://bit.ly/HybridBatteryAirFilter Gen 2 Prius 2004-2009 Hybrid Battery Replacement: https://youtu.be/Q3RCdrh666w 0:00 Intro 2:14 How tell if your hybrid battery is bad 3:18 How to remove car interior pieces 9:10 How to use epoxy to repair interior panels 10:00 How to disconnect the hybrid battery 15:12 Removing the hybrid battery from the car 16:09 Disassembling the hybrid battery pack 21:17 Installing new cylindrical battery cells 32:30 Installing the rebuilt battery into the car 34:07 Testing the new hybrid battery 35:18 Installing the car interior 38:17 Fuel economy test drive → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace your windshield wiper brakes. If your wipers do not return to the correct position and stick up too far or if your wipers are making a squeaking noise, this video will help you solve your problem. I show you how to remove the windshield wipers, disassemble the wiper cowl, remove the wiper brake caliper and wiper rotor and replace the wiper brake pads. NRS Wiper Brakes: https://nrsbrakes.com/ Torque Wrench: https://amzn.to/42Xjdaf Hammer: https://amzn.to/3G8q5I8 Auto-adjusting Locking Pliers: https://amzn.to/3Kpnlc0 *Other helpful "How To" videos* How to Replace Blinker Fluid: https://www.youtube.com/watch?v=E6GsXhBb10k How to Replace Muffler Bearings: https://www.youtube.com/watch?v=eWdqlpxRA4I How to Replace Piston Return Springs: https://www.youtube.com/watch?v=oFX_Xq9WHTI Winter vs Summer Air for Tires: https://www.youtube.com/watch?v=2t09qfrYwok Thanks Shmee150 for stopping by: @Shmee150 0:00 Intro 0:46 Three common symptoms of bad wiper brakes 2:00 Tools and Products 3:58 How to remove wiper blades 5:03 Wiper brake replacement 8:27 How to install wiper cowl 8:47 How to install wiper blades 8:55 Testing wiper blades → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to flip a car aka buy a used car, fix it up, and sell it for a profit. In this video I teach you my tips and tricks on how to successfully flip a car including how to find a good used car, how to check the car for problems, and then how to fix up the car. Super cleaning the interior, super cleaning the engine bay, doing a paint correction, and restoring your cars headlights are just some things you will learn in this video! Search Used Cars on AutoTempest: https://www.autotempest.com/ Car Flipping Checklist: https://bit.ly/CarFlippingChecklist *Car Inspection* OBD2 Car Scanner: http://amzn.to/1XNUGfz Head Gasket Tester: https://amzn.to/3yghwGJ Battery Tester: https://amzn.to/3L5pLxf ChrisFix Ratchets: *Interior Clean* Detailing Brushes (including vent brush): https://amzn.to/3ya4mum Melamine Foam: https://amzn.to/3ZqTuEW Interior Protectant Spray: https://amzn.to/3IRysbK Extractor Vacuum: https://amzn.to/3miyDVF *Exterior Paint Correction* Wash and Wax: https://advanceautoparts.rt8x.net/WashnWax Clay Bar: https://amzn.to/3kO3dpN Iron Decon: https://advanceautoparts.rt8x.net/IronDecon Cleaner Wax: https://amzn.to/3IWpObV *Engine Bay Detail* Spray Nine Degreaser: https://advanceautoparts.rt8x.net/Spray9 Brushes: https://amzn.to/3ya4mum Water-based Dressing: https://amzn.to/3ZpMurQ *Headlight Restore* 3000 and 5000 grit sandpaper: https://amzn.to/3ZpX1n6 Plastic Polish: https://amzn.to/3ZnAyqx Ceramic Coating: https://amzn.to/41QfXNy 0:00 Intro How to Buy a Used Car to Flip 1:23 Past car flipping examples 8:47 New car reveal 9:33 How to find a used car online 14:44 How to scan check engine lights 15:45 How to test for a head gasket leak 17:26 Test drive the car 19:00 How to repair rattling exhaust 21:28 How to clean dirty car interior 31:40 How to restore faded paint 37:05 How to detail engine bay 39:30 How to restore headlights 42:02 How to install hubcaps 43:14 Stuff to avoid when buying a used car 46:24 Conclusion → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Here's my top 5 Christmas Gift Ideas for car guys and girls. These are the coolest gadgets and most helpful tools I could think of for this year. This year's gifts are extra special with the BRAND NEW ChrisFix children's book and ChrisFix Extendable Ratchet Set!!! I also included stocking stuffers for even more gift ideas on a budget! These gift ideas are all products I personally use and like enough to share with my fans! ChrisFix Children's Book: https://amzn.to/3hsrlgb 1. ChrisFix Extendable Ratchets: https://amzn.to/3ho15TX Ratcheting Flare nut wrench: https://amzn.to/3UPIZb2 Reverse Bleeder: https://amzn.to/3hi8AvH 2. Vacuum Carpet Extractor: https://amzn.to/3W96Rbu Vacuum extractor attachment: https://amzn.to/3Yds9pF Steam Cleaner: https://amzn.to/3uJRKJs 3. M12 Tire Inflator: https://amzn.to/3FSQpq9 M18 Tire Inflator: https://amzn.to/3BrDMiR Ryobi Tire Inflator: https://amzn.to/3VQYjWj Torque Lug Wrench: https://amzn.to/3Wb4LqU 4. Knife Sharpener: https://amzn.to/3WaLLJ4 Leatherman Multitool: https://amzn.to/3FIOnsg Nut and Bolt size tester: https://amzn.to/3uI0qjq 5. Flexible Borescope Camera: https://amzn.to/3FlCZkF Small Dual Lens Camera: https://amzn.to/3Wh4Wkx Cavity Wax: https://amzn.to/3FJgh7D The Other Christmas Gift Idea videos I did: 1st year: https://www.youtube.com/watch?v=esMSQ8iF924 2nd year: https://www.youtube.com/watch?v=3-PZ4gE5o14 3rd year: https://www.youtube.com/watch?v=EOeOZPiF8qY 4th year: https://www.youtube.com/watch?v=DvcpqCPQ3uI 5th year: https://www.youtube.com/watch?v=2K9i_RTAV7E 6th year: https://www.youtube.com/watch?v=vYv4QAqRwBw 0:00 7th Annual Top 5 Christmas Gift Ideas for Car Guys and Girls Intro 0:58 ChrisFix children's book 1:59 Flare nut ratcheting wrenches 4:21 ChrisFix extendable ratchet set 8:09 Reverse brake bleeder 9:45 Extractor vacuum cleaner 12:04 Extractor vacuum attachment 13:27 Steam cleaner 14:13 Milwaukee and Ryobi tire inflator 16:29 Lug torque wrench 18:14 Knife and tool sharpener 20:35 Leatherman multitool 23:39 Nut and bolt measuring tool 24:41 Borescope camera 26:51 Cavity wax rust prevention ___________________________________________ → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

At last year's endurance race, we failed badly blowing up our engine in only 15 laps... This year, the ChrisFix Soapy Wooder Racers are ready for their comeback! We spent a year rebuilding and swapping a junkyard motor into the car and fixing tons of small broken parts to make our endurance lemon BMW ready to race for 14hrs. Will we last more than 15 laps? Will the engine blow up again? Can we make it to the finish line after 14hrs of racing? Find out! Oil Test Kit: https://amzn.to/3uhlMDY ChrisFix Extendable Ratchets: Coming Soon!!!! Buying the Lemon BMW: https://youtu.be/_U5XcrifRjQ How to Replace Power Steering Pump: https://youtu.be/04iDF3I6dTo Complete Weight Reduction Episode: https://youtu.be/MCiNGmwopx4 What Happened to the Lemons BMW: https://youtu.be/IbPhor1mnCA How did the BMW Engine Blow Up?: https://youtu.be/SMuSqESZ7_8 How to Install a Quick Release Steering Wheel: https://youtu.be/bIGDhqY6KpE → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Today I show you how to install gauges, a heel plate, wheel hub studs, Lexan windows, and modify your exhaust to turn your car into an endurance race car, kind of... Hopefully all of our fixes prepare us for the endurance race this year because last year definitely didn't go well with our car lasting only 15 laps until the engine blew up! AirShaper: https://www.youtube.com/c/AirShaper Permatex Red Threadlocker: https://ebay.us/9UFkuB Oil Temp Gauge: https://ebay.us/ZpXEAH Oil Pressure Gauge: https://ebay.us/vUqosV Wheel Studs: https://ebay.us/5ZotBc Riv Nut Tool Kit: https://ebay.us/ZW7atK 10w60 Oil: https://ebay.us/ygKTib Exhaust Tube Kit: https://ebay.us/CpGpiS → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to repave your driveway, including digging out the old driveway, laying down stone for a good sub-base, grading, leveling, and compacting that stone, and finally laying down fresh hot mix asphalt. This new asphalt driveway came out amazing and I cannot wait to use it to make more videos! Oil Spill Mat: https://amzn.to/3xP230F Thank you Platinum Paving for doing a great job on the driveway. The owner is a fan of my channel and I appreciate him putting down his best driveway possible! https://www.platinumpavingnj.com/ → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to fix a door that wont lock or unlock by replacing a door lock actuator. #shorts

Learn how to install a carbon fiber steering wheel that keeps the stock airbag. This was done on a C5 Corvette but you can do this on any vehcile! This is a safe alternative to an aftermarket quick release steering wheel that has no airbag just in case you drive the car on the street. Extendable Ratchet Set: https://amzn.to/3Qg5mEK Puller Set: https://amzn.to/3QgZWJA

Learn how to repair and remove dents from your car. When you can't do PDR, properly using a high quality body filler is the next best thing to remove dents. In this video, I show you how to sand the dents down to bare metal, add the body filler, add the glazing putty, spray paint the car at home, and then wet sand, compound, and polish, to make it come out amazing! Pro Grade Body Filler: https://advanceautoparts.rt8x.net/Filler Pro Grade Glazing Putty: https://advanceautoparts.rt8x.net/Putty Spreaders: https://advanceautoparts.rt8x.net/Spreaders Sanding Block: https://advanceautoparts.rt8x.net/SandBlock Sandpaper assortment: https://amzn.to/3PEZ69t Tack Cloth: https://advanceautoparts.rt8x.net/tackcloth Primer: https://advanceautoparts.rt8x.net/Primer 2K Clear Coat: https://amzn.to/3OnWnQw Full Face Respirator: https://amzn.to/3aWIWtk Respirator Filter: https://amzn.to/3cqrihY Compound PC1: https://amzn.to/3PqlN1g Polish PC2: https://amzn.to/3IUo8zc Finishing Polish PC3: https://amzn.to/3yNQ0Ao Polishing Pads: https://amzn.to/3yStHJX DA Polisher: https://amzn.to/3ojkG7G → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to Super Clean your wheels with 5 simple steps. Not only will I show you how to clean the brake dust off but I will show you how to remove stains and tar which can be difficult to clean off. Then I will show you how to protect the wheel surface and also add tire shine to the tire sidewall to protect it from UV rays and ozone. This video includes product placement of Meguiars detailing products. Detailing Brush Set: https://amzn.to/3ya4mum Wheel Cleaner (safe for all wheels): https://amzn.to/3o4QQna Tar Remover: https://amzn.to/3Ry9UYM Mild Clay Bar: https://amzn.to/3RzWZpk Aggressive Clay Bar: https://amzn.to/3o0gSZ6 Compound: https://amzn.to/3z3RGH6 Ceramic Detail Spray: https://amzn.to/3uKJyJ3 Gel Tire Dressing: https://amzn.to/3cbSocA Ceramic Plastic Restorer: https://advanceautoparts.rt8x.net/qn3RPn Wheel Barrel Cleaner: https://amzn.to/3yzo0Aw Wheel Touchup Pen: https://amzn.to/3yzo0Aw Super Clean your Carpets and Headliner: https://youtu.be/Pctzq_pT2MU Super Clean Paint: https://youtu.be/CFXfSBR5Q9w Super Clean Engine Bay:https://youtu.be/PRSoRkM8GcM Super Clean Windshield: https://youtu.be/vJkfrY2owb0 0:00 Intro 1:54 Tools and Products Needed 3:51 Step 1: Rinse Wheels Down 4:40 Step 2: How to Clean Wheels 15:06 Step 3: Dry Wheels 15:53 Step 4: How to Remove Stains from Wheels 21:49 Step 5: How to Apply Tire Shine and Protectant 29:11 Step 6: How to Maintain your Clean Wheels → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

What do you think of the new livery? Before we ruin the wrap at the endurance race I wanted to show you guys real quick!

Here's a quick tip on how to Super Clean your car's carpets to get all of the dirt out! Inexpensive massage gun I used: https://amzn.to/3GLQn25

Learn how to install a battery cut-off switch that kills the engine and all electrical power to-and-from the battery. I also show you how to crimp battery cables using a hand crimper, hammer crimper, and hydraulic crimper, so you will learn each method and how to get perfect crimps. Jig Saw: https://www.ryobitools.com/products/details/33287190171 Drill: https://www.ryobitools.com/products/details/33287191581 Impact Wrench: https://www.ryobitools.com/products/details/33287190515 Angle Grinder: https://www.ryobitools.com/products/details/33287188048 Heat Gun: https://www.ryobitools.com/products/details/33287177318 Kill Switch: https://amzn.to/3lXtE9n Small Wire Crimper: https://amzn.to/3NJsMB5 Hammer Crimper: https://amzn.to/3wQssLn Hand Crimper (and cable cutter): https://amzn.to/3lUElK5 Hydraulic Crimper: https://amzn.to/38Ngf13 Terminal End Kit: https://amzn.to/3Gp0iud 2 Gauge (7mm) Wire: https://amzn.to/3GpvCca Hole Mount Zip Ties: https://amzn.to/3PNdq0s Zip Tie Mounts: https://amzn.to/3t0H8oM How to Install a Kill Switch: https://youtu.be/XUhXLsrZiE0 Parasitic Draw Test: https://youtu.be/YC--MLNIbik 0:00 Intro 1:32 Tools and Products 5:40 Wiring Diagram 6:19 How a Kill Switch Works 11:20 How to Crimp Battery Cables 19:50 Easy Way to Add Split Wire Loom Tubing 20:29 Installing the Battery Cables 24:10 Organizing the Wiring 26:12 ECU Cut Off Wiring 31:54 Kill Switch Panel Fabrication 37:47 Panel Installation 39:20 Testing the Kill Switch → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to change your steering wheel so you can remove your old steering wheel and replace it with a quick release steering wheel. In this video I show you how to remove the airbag and steering wheel and install a Momo steering hub, an NRG quick release hub and a racing steering wheel with push buttons for the horn and radio. Thanks @ThatDudeinBlue for sharing your dangerous steering wheel footage! NEW ChrisFix swag: https://www.bunkerbranding.com/pages/chrisfix Shallow Dish Steering Wheel: https://amzn.to/3EWqJGR Deep Dish Steering Wheel: https://amzn.to/3LmpqDv Steering Wheel Screws: https://amzn.to/3y1wFg8 NRG Quick Release: https://amzn.to/3MCnw1F Momo Hub Adapter (for e46): https://amzn.to/3EY6hFy Push to Talk Button for Radio Communication: https://amzn.to/3EWoe7k Push Button Mount: https://amzn.to/3Kslvnx Breadboard Pin Connectors (for horn): https://amzn.to/3KlnkCF Crimping Tool: https://amzn.to/3Kqu4zc Steering Wheel Puller: https://amzn.to/3KsvSaA Steering wheel hook: https://amzn.to/3vpXAk2 Common Hand Tools: https://tengtoolsusa.com/ → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix 0:00 Intro 0:18 What does a quick release steering wheel do? 3:19 Common hand tools and products 5:37 How to remove airbag 9:26 How to wire horn 11:22 How to remove steering wheel 13:06 How to install quick release steering wheel 18:35 Which steering wheel should you get? 21:56 How to install a push to talk button 25:38 Testing the quick release steering wheel **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Since we removed the door panels and the car door handles I needed a way to open the doors on the endurance car. So in this video I show you how to install DIY door pulls with some steel cable so you can open the door and get out of the race car quickly!

Is your bathroom or kitchen sink faucet leaking or clogged? Learn how to replace a sink faucet yourself in under an hour with common hand tools. This repair is quick and easy, and a new faucet can be installed with only two tools. The average cost for a plumber to replace a faucet is $400 so by doing this yourself you save $350 and every time you use the sink you can be proud you replaced your faucet yourself! Faucet I used: https://amzn.to/3wXpwxc Other Faucet Designs: https://amzn.to/3NJdOvK Adjustable Wrench Set: https://amzn.to/3LEOfKN Tongue and Groove Pliers Set: https://amzn.to/3rhPKH5 0:00 How to replace a bathroom sink faucet 1:20 How to shut off water 1:58 Remove old faucet 3:20 Install new faucet 5:40 How to replace drain 8:26 Install new drain 9:23 Check for leaks → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to quickly and easily remove studs from an engine with using the two-nut trick! Studs do not have any ends for a wrench or ratchet to grab onto and using a plyers can damage the threads but this method will not damage the threads at all. #Shorts

What is a spun bearing? Can you drive on a spun bearing? You can have a spun rod bearing or a spun crank bearing and when they fail, it sometimes destroys the engine like in our Lemons BMW. In this video I show you how to diagnose a spun bearing and possible causes. We disassembled the entire engine, every single nut and bolt, so you guys can see what causes an engine to throw a connecting rod and fail. Our Backup Race Engine Being Built: https://youtu.be/f8Z4OSrI59s Picking our Endurance Race Car: https://youtu.be/_U5XcrifRjQ How to Replace Power Steering Pump: https://youtu.be/04iDF3I6dTo Complete Weight Reduction Episode: https://youtu.be/MCiNGmwopx4 What Happened to the Lemons BMW: https://youtu.be/IbPhor1mnCA My FIRST Wheel to Wheel Endurance Race: https://youtu.be/_vrICr6iNGI 0:00 How the engine failed 1:25 Installing the junkyard M54 engine 3:14 Stainless steel long tube headers 5:13 Backup BMW motor being built 6:44 What caused the motor to fail 10:20 What is a spun bearing 13:43 What causes a spun bearing 15:17 Oil analysis 18:17 Race car livery → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

What is it like to drive a race car in a door to door endurance race? Well in this video I show you our 24hours of Lemons e46 BMW and our team's first time on the race track. After installing a fire suppression system, battery cutoff switch, roll cage, and containment racing seat with a full 6pt harness, we are ready to race... Well, so we thought... What we expected to be a weekend of racing ended up being a weekend of swapping a blown motor with a new junkyard motor into the race car. Tech Inspection Checklist: https://bit.ly/LemonsTechSheet Fully Loaded Teng Toolbox: https://bit.ly/TengToolBox Containment Race Seat: https://bit.ly/HaloRacingSeat Racing Steering Wheel: https://amzn.to/35zskod Cool Suit: https://amzn.to/3M7fEWr Picking our Endurance Race Car: https://youtu.be/_U5XcrifRjQ How to Replace Power Steering Pump: https://youtu.be/04iDF3I6dTo Complete Weight Reduction Episode: https://youtu.be/MCiNGmwopx4 What Happened to the Lemons BMW: https://youtu.be/IbPhor1mnCA 0:00 24 Hours of Lemons Race 0:23 New Jersey Motorsports Park Thunderbolt Race Track 1:09 Race Car Tech Inspection 4:07 24hrs of Lemons BS Inspection 6:44 ChrisFix Endurance Racing the BMW 11:35 Aaron Wheel to Wheel Racing the BMW 15:00 We Find a Rod Through the Engine Block 16:30 Swapping an M54 BMW Engine 21:55 Finishing the Endurance Race → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

We bought a $500 lemons e46 BMW, fixed the major problems like the mass airflow sensor and power steering pump, and then gutted the car for weight reduction and so a roll cage could be fabricated and welded in... But then the project went silent... What happened to the car? What happened at the race? Well the Lemon BMW is back and you are about to find out! Picking our Endurance Race Car: https://youtu.be/_U5XcrifRjQ How to Replace Power Steering Pump: https://youtu.be/04iDF3I6dTo Complete Weight Reduction Episode: https://youtu.be/MCiNGmwopx4 Race Day: Coming next week! Fire Suppression System: https://bit.ly/FireSuppressSystem USA Made Tow Strap: https://raceseng.com/products/tow-straps 0-60 GPS Timer: https://amzn.to/3KYMVTk Cool Shirt System: https://ebay.us/Un23JQ → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How do you check how old tires are and how old can tires be before they go bad? Do tires expire? In this #shorts video I cover how to tell how old tires are. You never want to buy new tires older than 18 months and you want to start thinking about replacing your tires if they are 6yrs old and at 10yrs or more definitely replace them! When I got my first set of new tires for my first car I was so excited. On the drive home I spun out on a turn and almost wrecked my car. I didnt take the turn fast or anything and I was so confused at what happend. After doing research I found my "new tires" were actually 7 years old and the rubber had become brittle and less grippy. Tire-easy would not let me exchange the tires because they were mounted so I learned an expensive and almost deadly lesson. Always check the tire age before buying tires!

Here's my top 5 Christmas Gift Ideas for car guys and girls. These are the coolest gadgets and most helpful tools I could think of for this year. ***NEW ChrisFish YouTube Channel*** https://www.youtube.com/channel/UChCd17oKbPA1yIfv4Cb_RSw I also included stocking stuffers for even more gift ideas on a budget! These gift ideas are all products I personally use and like enough to share with my fans! Plus I have a surprise at the end of this video with the ChrisFish channel! 1. Short Ramps: https://amzn.to/31WHNNi Long Ramps: https://amzn.to/33o2QJB Oil Udder: https://amzn.to/3DGQskt 2. Ryobi DA Polisher: https://bit.ly/RyobiDApolisher Drill Brushes: https://amzn.to/3dERy5E 3. Smoke Machine: https://www.autolinepro.com/collections Utility Scraper Knife: https://bit.ly/UtilityScraperKnife 4. Ratchet Extenders: https://amzn.to/3s1UEca Drill Bit Set: https://amzn.to/3dHR2nh Spark Plug Socket Set: https://amzn.to/3rVxqVd 5. E85 Ethanol Conversion Kit: ($100 off use code EFLEX100HOL) https://eflexfuel.com/us/ Spill Proof Funnel: https://amzn.to/3lYwzzb The Other Christmas Gift Idea videos I did: 1st year: https://www.youtube.com/watch?v=esMSQ8iF924 2nd year: https://www.youtube.com/watch?v=3-PZ4gE5o14 3rd year: https://www.youtube.com/watch?v=EOeOZPiF8qY 4th year: https://www.youtube.com/watch?v=DvcpqCPQ3uI 5th year: https://www.youtube.com/watch?v=2K9i_RTAV7E → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** 0:00 Intro 1:40 Car Ramps Review 4:52 Oil Udder Review 7:57 Ryobi One+ DA Polisher Review 11:35 Detailing Drill Brush to Clean Carpets 12:28 How to find Vacuum Leaks with a Smoke Machine 15:42 toughbuilt scraper utility knife 5-blade retractable utility knife review 17:06 Tite Reach Ratchet Extenders Review 19:44 Drill Bit Set Review 20:53 How to Replace Spark Plugs Magnetic Socket 23:09 E85 Ethanol Conversion Kit by Eflexfuel 26:10 How to Change Coolant Spill Proof Funnel Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace a front or rear windshield safely and properly. If you get a chipped or cracked windshield, save money replace the windshield yourself at home with common hand tools. I cover the entire process from where to buy the glass, how to remove the old glass, how to remove the urethane from the pinch weld, how to prepare the glass and how to put the new urethane on and install the new glass. Where to Buy Windshield: 3:44 How to Test Window Defroster: 4:55 Tools and Products: 6:08 Broken Windshield Removal: 8:38 Prepare the Car Pinch Weld Surface for Glass: 12:03 Prepare the Windshield for Install: 17:17 Test fit Rear Windshield: 20:16 Apply Primer to Windshield: 21:44 Apply Primer to Car Pinch Weld: 23:21 How to Cut Urethane Tip: 24:40 How to Apply Windshield Urethane 27:29 How to Install Rear Windshield: 29:28 Check Rear Defroster and Check for Leaks: 33:35 How to Repair a Chipped Windshield: https://www.youtube.com/watch?v=aAsUG-jbLlM 24hr Urethane and Primer kit: https://ebay.us/sjGtgY Daubers: https://ebay.us/VMJmSL Caulk Gun (this one is really nice): https://ebay.us/5IuOUy Plastic Chisel Set: https://ebay.us/WQGrgC Metal Scraper: https://ebay.us/rHRhtt Razors: https://ebay.us/oxLIYZ → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Replacing a Head Gasket can be difficult and expensive. Sometimes your car is not worth fixing and this is where a head gasket sealer in a bottle comes in handy. Do these head gasket sealers actually work? How long do they last? How do they work? What does a bad head gasket look like? Do head gasket sealers clog radiators? In this video I show you how to use a head gasket sealer to repair the head gasket and test it for 2yrs and 10,000 miles. I then tear down the engine and show you how the headgasket failed, how the sealer worked, and if the radiator got clogged up with sealer. PEAK OET Antifreeze: https://ebay.us/H3GsqO CRC Head Gasket Sealer: https://ebay.us/B2sg0Q BlueDevil Head Gasket Sealer: https://ebay.us/ZrbID7 K-Seal Head Gasket Sealer: https://ebay.us/Ysu7TK Bar's Leaks Head Gasket Sealer: https://ebay.us/vdvL0y Head Gasket Test Kit: https://ebay.us/IAbWUu Spill Proof Funnel: https://ebay.us/QraoPc → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to remove rust with products you have at home like vinegar and ketchup. This rust removal process is super easy and removes every spec of rust. First step is to use soapy water to clean and degrease your rusted parts. Next, cover the rusted parts with vinegar or ketchup and let it soak for 4-6hrs. Then use baking soda and water to neutralize the acid and finally spray the parts down with a light oil like silicone spray to prevent future rust. Anti-Rust Spray: https://amzn.to/3AXEWQV Ketchup: https://amzn.to/2Y4XaBq Vinegar: https://amzn.to/3mkadrs #Shorts

Is your exhaust leaking? Fumes getting into the car? Is your exhaust loud? Learn how to repair a leaking exhaust without a welder to make it quieter. This is a really simple process using common hand tools. Tail Pipe Expander: https://ebay.us/OjBfoW Reciprocating Saw: https://ebay.us/7XYfvu Exhaust couplers: https://ebay.us/QjmUTt Exhaust Clamp: https://ebay.us/SCbfJw Exhaust RTV: https://ebay.us/iYUvw0 Extractor Set: https://ebay.us/EcDEXg MAP Gas: https://ebay.us/6cQ0RY Penetrating Fluid: https://ebay.us/1PDakq Common Hand tools: https://tengtoolsusa.com/ → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

LED lights are more efficient than old school incandescent bulbs. LEDs use less battery power, run cooler, and look way better than the original incandescent bulbs so I am replacing all of the lights on my Hummer with new LED bulbs! #Shorts LED Bulbs for your car: https://amzn.to/3godDHk Hummer LED Running Lights: https://ebay.us/2iXeBW

My truck would just click once and lose all battery power when I go to start it. Here is a ChrisFix quick tip on how I fixed it! #Shorts Electronics Cleaner: https://amzn.to/3iOMXRQ Metal Wire Brush: https://amzn.to/3xOPU9d **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Let me show you how to install portal hub covers on my Durmax swapped Hummer H1! Hub Covers I Installed: https://modmafia.com/products/vented-inspection-hub-covers #Shorts

Does your engine rattle on startup? A bad variable valve timing VTC actuator or bad cam phasers can cause a rattling noise on a cold start. This is a common problem in Honda 2.4 engines including the Accord and CRV among others. This is also a common problem in Ford Ecoboost engines. In this video I show you how to diagnose a bad VVT actuator which can cause a P1009 check engine code. Then I show you the entire process on how to replace the VTC actuator without removing the camshafts and using only common hand tools. I show you how to set the engine to top dead center, remove the timing chain, replace the VTC actuator and install new gaskets in the valve cover to prevent oil leaks. Spray Nine Degreaser: https://advanceautoparts.rt8x.net/LPx09Y High Strength Removable Threadlocker: https://advanceautoparts.rt8x.net/ZdxVgk Quick Set Gasket Maker: https://advanceautoparts.rt8x.net/XxL4Jg Bluetooth OBD2 Scanner: https://amzn.to/3zPq6v1 VTC Actuator: https://advanceautoparts.rt8x.net/b3DkEk Honda 2.4l Valve Cover Gasket Set: https://advanceautoparts.rt8x.net/2rQRAQ Tools: https://tengtoolsusa.com/ → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Window wont roll up? Learn how to replace a window regulator motor in your car. Replacing the window motor is less expensive than replacing the entire window regulator assembly. Replacing the window motor can fix a window that is stuck down, or doesn't roll down at all. Also if your window is getting stuck or is slow to go up and down, or it is making a grinding or whining noise, this video will show you how to repair it. Window regulator motors: https://ebay.us/UnyoLL Dry lubricant for windows: https://ebay.us/oiFwo8 Butyl Tape: https://ebay.us/mXW2CX Medium strength threadlocker: https://ebay.us/oNtH5z Silicone Paste (dielectric grease): https://ebay.us/9AFFDW Common hand tools: https://tengtoolsusa.com/ → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How much weight can you remove from your car? Well in today's video we take weight reduction to the next level and find out! I show you how much the seats weigh, how much the stuff in the trunk weighs, how much the carpets and sound deadening weigh, how much the plastic interior pieces weigh, how much the sunroof weighs, and finally how much the dash weighs. 0-60 GPS: https://ebay.us/lP5Y8m Car Scale I used: https://ebay.us/CQ3iid Mini Impact gun: https://ebay.us/eTcfqR Electric Drill: https://ebay.us/1jlLw7 Timestamps: 1:20 Track 0-60mph Test 3:49 How much the car weighs before 4:28 How to remove seats 6:18 Trunk weight reduction 8:19 How to remove interior plastic trim 10:14 How to remove e46 center console 11:26 How to remove the carpets from your car 13:11 How to remove sound deadening from your car 16:34 How to remove a headliner from your car 18:33 How to remove a car sunroof 19:42 How to install a sunroof delete panel 21:05 How to remove the dashboard in a car 24:34 BMW 0-60mph track test after weight reduction → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Power steering pump making noise? Heavy steering? Power steering leak? Learn how to replace a power steering pump and leaking power steering lines to fix a steering wheel that is hard to turn or a noisy power steering pump. Replacing a power steering pump and power steering lines is really simple to do and can be done at home with common hand tools. How to Flush Your Power Steering Pump: https://www.youtube.com/watch?v=A0fiZCHz5ew How to Buy a Budget Friendly Project Car eBay Motors: https://ebayvehicle.com/app/ChrisFix PEAK Power Steering Fluid: https://advanceautoparts.rt8x.net/9WVVxy Power Steering Pump: https://ebay.us/XR8Y55 Ring Nose Pliers (for hoses): https://ebay.us/neOX1Z Torque Wrench: https://amzn.to/3ypq3pT Flare Nut Crows Foot Wrench Set: https://amzn.to/3oCGJWp → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Is your car battery dead? Need a new car battery? Learn how to test if your car battery is bad and how to recharge a dead car battery. Also learn which car battery is best for your car. In this video I show you how to test your car battery with a multimeter, clean corrosion from the battery terminals, test your alternator, test for a parasitic draw, load test a battery, and replace a car battery properly. I also show the inside of a car battery with a bad cell and I show how batteries work with multiple grids and how they go bad with heat, vibration and corrosion. And finally I show you the main difference between the different grades of battery and which is right for you. Tools and Products: DieHard Battery: http://bit.ly/DieHard-Batteries-Chris-Fix Felt Corrosion Protectors: http://bit.ly/DieHard-Felt-Terminal-Protectors Battery Load Tester: http://bit.ly/Schumacher-Battery-Load-Tester Multimeter: http://bit.ly/innova-multimeter Battery maintainer: http://bit.ly/battery-maintainer Battery Charger: http://bit.ly/Schumacher-battery-charger → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Bad wheel bearing? Wheel bearing noise? Learn how to replace a wheel bearing in your car or truck. In this video I show you how to replace a front or rear wheel bearing hub assembly. With this wheel bearing replacement you need to remove the axle nut, the brake caliper and rotor, and unbolt the bad wheel hub bearing assembly. It is that simple! I show you how to replace the wheel bearing at home using common hand tools, and this time the video is an ASMR (autonomous sensory meridian response) video with high quality audio! Tools and Products: Torque Wrench: https://amzn.to/3rKi7Ll Wheel Bearing: https://advanceautoparts.rt8x.net/Yg9gYj Slide Hammer (you can rent for free from parts store): https://amzn.to/2OevxBr Flex Ratchet: https://amzn.to/31SvQFv Threadlocker: https://amzn.to/3sJnLyl → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how you can buy a project car for less than the cost of a new cell phone! Project cars are great for learning how to fix a car and when you are "done" (project cars are never done), you can be proud to drive the car you fixed up! In this series eBay Motors challenged me to buy a 24hr endurance race car for the 24hrs of Lemons race series. The car I chose had to be fast, reliable, and under $500! eBay Motors (show them some love): https://ebayvehicle.com/app/ChrisFix BlueDriver OBD 2 Code Scanner: https://amzn.to/2QHkn9r The BEST Pricing on Racing Gear: https://www.stableenergies.com/ Visit Stable Energies: 175 Passaic St, Garfield, NJ 07026 → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

If you live somewhere that gets snow, this video will teach you some helpful tips and tricks I have learned over the years to prepare your car for the snow! Learn how to remove ice from your windshield and how to remove snow from your car quickly without scratching the paint. I also show you how to prevent your door and lock from getting frozen shut and many more tips and tricks! I even show you how to use a car detailing spray to prevent the snow from sticking! Windshield Snow/Ice Shield: https://amzn.to/3dsj3Aj Silicone Spray: https://amzn.to/3blnREZ Snow Removal Brush: https://amzn.to/3pG3OpY Windshield Washer Fluid: https://advanceautoparts.rt8x.net/jWXJd6 Ceramic Spray: https://advanceautoparts.rt8x.net/15eZAx Strong Leaf Blower: https://amzn.to/3bg1II4 Timestamps: How to get more traction on snow and ice: 0:40 How to get out of your driveway or parking spot safely: 1:48 How to top off washer fluid: 2:51 How to prevent doors and locks from freezing: 3:13 How to prevent ice from sticking to your windshield: 5:55 How to prevent snow from sticking to shovel: 8:29 How to prevent scratching your paint while removing snow: 9:25 How to remove snow without touching it: 10:10 How to remove ice from glass: 12:43 → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

#Shorts (under 60 seconds) ChrisFix Quick Tip With this ChrisFix Quick Tip, learn how to remove snow from your car without scratching the paint. I also have a tip on preventing the windshield from icing up and to clean off the side view mirrors very easily. Electric Leaf Blower: https://amzn.to/3tcYYn8 Microfiber Towel: https://amzn.to/36yCAel Snow Brush: https://amzn.to/3raTIyG Windshield Snow Cover: https://amzn.to/3oFaAM2 → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to repair a deep scratch in the paint of your car. In this case someone keyed my car so I will show you how to remove a deep scratch from that using a touch up paint pen. Fixing scratches in your car's paint is simple and if they are just clear coat scratches it is even easier. To remove deep scratches you need to clean the scratch, sand the scratch, use touchup paint on the scratch, sand that paint smooth with the factory paint job, add clear coat, and wet sand that smooth with the factory paint. Then you can polish the whole panel and you are done! Clear Coat Scratch Repair: https://youtu.be/2nYF46P7B2c Paint Pen: advanceautoparts.rt8x.net/voOO3 1000-1500-2000 Grit: https://advanceautoparts.rt8x.net/mD0b7 3000 Grit Sandpaper: https://advanceautoparts.rt8x.net/x0Rbx 5000 Grit Sandpaper: https://advanceautoparts.rt8x.net/QRWea Polish: https://advanceautoparts.rt8x.net/rABbj Polishing Pad: https://amzn.to/2YcLJEG Microfiber Towel: http://amzn.to/1TQK01h Tape: http://amzn.to/1SEBgtL Isopropyl Alcohol: https://amzn.to/36dak0H → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Here's my top 5 Christmas Gift Ideas for car guys and girls. These are the coolest gadgets and most helpful tools I could think of for this year. I also included stocking stuffers for even more gift ideas on a budget! These gift ideas are all products I personally use and like enough to share with my fans! 1.) DIY Ceramic Coating: https://Avalonking.com (use code "xmas25" for $25 off) Undercarriage Washer: https://amzn.to/2K2tqi4 2.) Jack Stands: https://www.etamfg.com/shop.html?store-page=Rennstand-Each-p252276669 (use code "5%OFF1220 for 5% off) Wheel Chock: https://amzn.to/2KpGbmN Rubber Jack Pad: https://amzn.to/3nib62Z 3.) Electric Impact Ratchet: https://amzn.to/3gQeG1F Precision Screwdriver Set: https://amzn.to/3gLRD86 4.) SAE/Metric Ratcheting Wrench Set: https://advanceautoparts.rt8x.net/QVyAx (use "ChrisFix25" for 25% off) Foam Case Ratcheting Wrench Set: https://tengtoolsusa.com/products/teng-tools-ted6512rs-12-piece-ratchet-wrench-set-in-eva-tray Breaker Bar Ratchet Adaptor: https://amzn.to/3gKjoy5 Ratcheting Breaker Bar: https://amzn.to/3qYu7tc 5.) Magnetic Paper Towel Holder: https://amzn.to/2WblrBI Mag Glove Box Holder: https://amzn.to/3qXyvZy Mag Can Holder: https://amzn.to/37hFmoY Mag Tool Tray: https://amzn.to/387cy1P Extendable Stick Magnet: https://amzn.to/37fWqLW Mag Blue Socket Holder Set: https://amzn.to/3gNFaku Low Profile Socket Holder: https://amzn.to/3miVYRw Mag Wrench Holder: https://amzn.to/3mfZJqN Mag Screwdriver Holder: https://amzn.to/3nvB9U8 The Other Christmas Gift Idea videos I did: 1st year: https://www.youtube.com/watch?v=esMSQ8iF924 2nd year: https://www.youtube.com/watch?v=3-PZ4gE5o14 3rd year: https://www.youtube.com/watch?v=EOeOZPiF8qY 4th year: https://www.youtube.com/watch?v=DvcpqCPQ3uI → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to test your antifreeze, and how to change your coolant to make sure it is protecting your car's engine and cooling system properly. In this video I cover what how to properly test your coolant and top off your radiator so it is a 50/50 mix that way your car wont overheat and your engine block wont freeze or corrode. Also if the heat in your car is weak or you dont have heat, in this video I will show you how to bleed the air out of the cooling system so you can get heat Coolant is 50% antifreeze and 50% distilled water. And no, freeze plugs are not going to save your engine block from freezing and cracking every time. Coolant Tester: https://advanceautoparts.rt8x.net/zZYq6 Concentrated PEAK 10x: https://advanceautoparts.rt8x.net/b4Y0k 50/50 PEAK 10x: https://advanceautoparts.rt8x.net/2bZJQ Distilled Water (no minerals): https://amzn.to/3qAGGe3 Ramps: https://advanceautoparts.rt8x.net/63mzG Spill Proof Funnel: https://amzn.to/3mS9xs1 Large Fluid Storage Container: https://amzn.to/3oxtzse Temperature Chart for Antifreeze:Water: https://bit.ly/AntifreezeWaterChart How to SUPER FLUSH your Coolant: https://www.youtube.com/watch?v=s--5ft5YiHg How to Flush your Heater Core: https://www.youtube.com/watch?v=M9SIafVsqyc How to Diagnose and Fix NO Heat in your Car: https://www.youtube.com/watch?v=-XjXTVJhFLM → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to clean and detail stained cloth and leather seats in your car. In this video I show you how to clean really dirty cloth seats with mud and stains in them as well as slightly dirty cloth seats which still need to be cleaned! I will also show you how to clean leather seats and use the corect leather cleaner and leather conditioner. The Super Clean series is about attention to detail so not only are we cleaning the interior but we are protecting it. The key to SuperCleaning the interior is using detailing brushes, a good vacuum, and just paying attention to the little details. Carpet and Upholstery Cleaner: https://advanceautoparts.rt8x.net/5edW9 Extractor Vacuum: https://amzn.to/3jCx8LT Leather and Vinyl Cleaner and Conditioner kit: https://amzn.to/3ffrJsI Detailing Brush kit (including the vent brush): https://amzn.to/36ISFyQ Interior Plastic/Vinyl High Gloss Protectant: https://advanceautoparts.rt8x.net/PLQJz Microfiber Towels: https://amzn.to/3kFKnuY Steam Cleaner: https://amzn.to/2UFYjL5 Shop Vacuum: https://amzn.to/2GR7AMI How to Super Clean your Carpets and Headliner: https://www.youtube.com/watch?v=Pctzq_pT2MU SuperClean Exterior: https://www.youtube.com/watch?v=CFXfSBR5Q9w SuperClean Engine Bay: https://www.youtube.com/watch?v=PRSoRkM8GcM SuperClean Windshield: https://www.youtube.com/watch?v=vJkfrY2owb0 → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to Super Clean and detail the interior of your car. This is a full detail of the car's interior. In this video I show you how to clean your dashboard, center console, door panels, and glass including the windshield. The Super Clean series is about attention to detail so not only are we cleaning the interior but we are protecting it. The key to SuperCleaning the interior is using detailing brushes, a good interior detailer, a good protectant and just paying attention to the little details. Interior Plastic/Vinyl Cleaner: https://advanceautoparts.rt8x.net/Qq9ZP Interior Plastic/Vinyl High Gloss Protectant: https://advanceautoparts.rt8x.net/PLQJz Interior Low Gloss Protectant: https://advanceautoparts.rt8x.net/jP5gv Waterless Wash and Wax:https://advanceautoparts.rt8x.net/5ed2j Glass Cleaner (streak free): https://advanceautoparts.rt8x.net/PoAZX Microfiber Towels: https://amzn.to/2FbdLuk Glass Towels: https://amzn.to/3osvoaY Steam Cleaner: https://amzn.to/2GCr7Az Detailing Brush kit (including the vent brush): https://amzn.to/36ISFyQ Vacuum Straw Attachment: https://amzn.to/34r0mbi Next Super Clean video (SEATS): Coming next week How to Super Clean your Carpets and Headliner: https://www.youtube.com/watch?v=Pctzq_pT2MU SuperClean Exterior: https://www.youtube.com/watch?v=CFXfSBR5Q9w SuperClean Engine Bay: https://www.youtube.com/watch?v=PRSoRkM8GcM SuperClean Windshield: https://www.youtube.com/watch?v=vJkfrY2owb0 → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Full Detail! Learn how to Super Clean and detail the interior of your car. In this video I show you how to clean your carpets, floor mats, trunk, and headliner. The super clean series is about attention to detail so not only are we vacuuming the carpet but we are also shampoing it with an extractor to remove all the embedded dirt and smells. Next Super Clean video (Dash, Center Console, Doors): Coming next week How to Super Clean your Seats: Coming the week after SuperClean Exterior: https://www.youtube.com/watch?v=CFXfSBR5Q9w SuperClean Engine Bay: https://www.youtube.com/watch?v=PRSoRkM8GcM SuperClean Windshield: https://www.youtube.com/watch?v=vJkfrY2owb0 Carpet Cleaner: https://advanceautoparts.rt8x.net/5edW9 Carpet Protector: https://advanceautoparts.rt8x.net/916m0 Interior Plastic/Vinyl Cleaner: https://advanceautoparts.rt8x.net/Qq9ZP Interior Plastic/Vinyl High Shine Protector: https://advanceautoparts.rt8x.net/PLQJz Waterless Wash and Wax:https://advanceautoparts.rt8x.net/5ed2j Microfiber Towels: https://amzn.to/2FbdLuk Shop Vacuum: https://amzn.to/2GR7AMI Steam Cleaner: https://amzn.to/2GCr7Az Extractor Vacuum: https://amzn.to/3jCx8LT Detailing Brushes: https://amzn.to/36ISFyQ Drill Brush Attachment: https://amzn.to/2I1k3xE → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Does your car idle poorly, have a rough idle, or in general have an idle problem? Learn how to fix a car with high or low idle, and learn how to fix a car that idles up and down by cleaning the idle air control valve. The IAC valve is what keeps the cars idle at around 800rpms. If you turn the ac on and it idles low or your car stalls at lights or in reverse, or your car shakes at idle, this video can also help! Throttle Body Cleaner: https://advanceautoparts.rt8x.net/XDn23 Pipe Cleaners: https://amzn.to/2YZr4om Socket Set: https://amzn.to/34YSKgS The OG Idle Air Control Valve Cleaning video (7yrs ago): https://www.youtube.com/watch?v=vFhoNykgQtc → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Sugar in the gas tank? Rust in your fuel lines? Clogged fuel injectors? Fill your car with diesel instead of gas? In this video I show you how to clean out the entire fuel system from how to clean the fuel tank, change the fuel pump, how to change the fuel filter, how to flush the fuel lines to how to clean the fuel injectors. So if you contaminated your fuel system, after watching this video you will be able to clean it out and get your car or truck running again! In this case I bought a car that was vandalized and was totaled because someone spray painted the car, keyed the car, and put sugar in the gas tank. Since it was damaged, I got the car for 1/3 of what it is worth fixed up and I am showing you guys how to fix it on a budget to make it a perfectly good running car! How to Remove Spray Paint from a VANDALIZED Car" https://www.youtube.com/watch?v=WihpfXxGOBo Locking Gas Cap: https://advanceautoparts.rt8x.net/qJEGY Fuel Pump Assembly: https://advanceautoparts.rt8x.net/NZQYV Ramps I use: https://amzn.to/39SaT0o 99% Isoproply Alcohol: https://amzn.to/33s9RqH Fire Extinguisher: https://amzn.to/2Pmq3BE Fuel Injector Tester Machine: https://bit.ly/FuelInjectorTester Torque Wrench: https://amzn.to/3i6jijO → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to remove spray paint and overspray from your car's paint, plastic headlights, glass windows and windshield. If you get spray paint on your car, wh...

Learn how to replace control arms and bushings to fix a car with a bouncy suspension. I show you how to figure out what is causing the bounce (shocks or bushings) and then I show you how to replace the upper and lower trailing arms and install new poly bushings. Then we take the DriftStang to the track and test her out! How to Replace Struts: https://www.youtube.com/watch?v=cI3EDqzOghc How to Replace Shocks: https://www.youtube.com/watch?v=dqDiMSxnIGo How to Install Coilovers: https://www.youtube.com/watch?v=8Qou-MDcYKA Tools and Products I used: Upper and Lower Trailing Arms: https://amzn.to/3idfL3V Torque Wrench: https://amzn.to/2NCpjr1 Extendable Ratchet: https://amzn.to/38hXNbZ Rubber Mallet: https://amzn.to/3gbOQUa → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to do an oil change, transmission fluid change, coolant flush, power steering fluid flush, brake fluid flush and bleed, differential fluid change, transfer case fluid change, grease the suspension, and finally add washer fluid properly! -Supplemental In-Depth Videos- Oil Change: https://www.youtube.com/watch?v=O1hF25Cowv8 Transmission Fluid Change: https://www.youtube.com/watch?v=yb_1wbiPz9g Coolant Change: https://www.youtube.com/watch?v=s--5ft5YiHg Power Steering Fluid Flush: https://www.youtube.com/watch?v=A0fiZCHz5ew Brake Fluid Flush: https://www.youtube.com/watch?v=n1NvtUwfRJc Differential Fluid Change: https://www.youtube.com/watch?v=KmqMUJb-E4M Transfer Case Fluid Change: https://www.youtube.com/watch?v=4Mz3nZ85ihQ -Tools- Fluid Pump: https://bit.ly/fluidoilpump Transmission Adapter: https://bit.ly/transmission-fluid-fill-adapter Suction Pump: https://bit.ly/performance-tool-suction-gun Spill Free Funnel: https://bit.ly/spill-free-funnel Torque Wrench: https://amzn.to/3grdMbj Oil Catch Pan: https://bit.ly/OilCatchCan Grease Gun: https://bit.ly/Suspension1GreaseGun -Fluids- Oil: https://bit.ly/valvoline-full-synthetic-high-mileage-oil Transmission Fluid: https://bit.ly/valvoline-atf-for-mercon-v Coolant: https://bit.ly/peak-oet-noth-american-gold-50-50-coolant Power Steering Fluid: https://bit.ly/valvoline-dex-merc-atf-conventional-automatic-transmission-fluid Brake Fluid: https://bit.ly/valvoline-brake-fluid Differential Fluid: https://bit.ly/valvoline_synthetic_gear_oil Transfer Case Fluid: https://bit.ly/valvoline-dex-merc-atf-conventional-automatic-transmission-fluid Grease: https://bit.ly/SuspensionGrease Washer Fluid: https://bit.ly/rain-x-windshield-washer-fluid → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Rust hole removal and repair. Repairing a rust hole in your car is something that should be done quickly to prevent it from spreading. You can easily do this at home with some practice and get the results you see in this video. I teach you the basics of what welder you want to use and how to weld so you can get started. I answer questions like, should you butt weld or lap weld floor panels? Rust is common at the wheel wells, quarter panels, rocker panels, and floor boards of cars and in this video I show the proper and most thorough way to remove and repair rust. Buying this car for $300: https://www.youtube.com/watch?v=7VX090Fi63E Rust Repair WITHOUT a Welder: https://www.youtube.com/watch?v=n4vusY2-rkQ PRODUCTS: Cheap Flux Core Welder: https://amzn.to/2SjkaHa Cheap MIG Gas Welder: https://amzn.to/2Yg8Hfn Welder I Used: https://bit.ly/WelderMIG Full Face Respirator w/ Filters: https://amzn.to/2W520tU TURBO KIT: https://bit.ly/TurboKit Rust Paint: https://amzn.to/3d4BRT3 Sheet Metal Nibbler: https://amzn.to/3bO0YsX Angle Grinder: https://amzn.to/2W6St5K Wire Wheel: https://amzn.to/2WdalvP Digital Caliper: https://amzn.to/3bPzxiv Socket Set: https://amzn.to/3cZkLG1 → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Have bad odors in your car because you just ate a bean borrito? Farting up a storm with a friend on a road trip? Well fear no more, in today's video I show you how to install your own car fart odor remover right into the seat of your car. The odors pass through an activate carbon filter and no one will smell a thing! Fart Spray: https://amzn.to/39Ayz7Q Fans: https://amzn.to/2R2JOzs Charcoal Filter: https://amzn.to/2Jslse3 Fuse Tap: https://amzn.to/39xBeiv On/Off Switch: https://amzn.to/2WVt4xT Hog Ring Pliers: https://amzn.to/33YAxh8 Multimeter: https://amzn.to/2QYz30P Impact Gun: https://amzn.to/2UwHJ0Q Torque Wrench: https://amzn.to/3dMCCkM Alex Sells His Miata: https://youtu.be/GtBDHn7zMxE Blinker Fluid: https://www.youtube.com/watch?v=E6GsXhBb10k Piston Return Springs: https://www.youtube.com/watch?v=oFX_Xq9WHTI Muffler Bearings: https://www.youtube.com/watch?v=eWdqlpxRA4I Summer/Winter Air: https://www.youtube.com/watch?v=2t09qfrYwok → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to detail a car with faded, scratched, paint. I will show you how to do paint correction by hand, how to remove swirl marks, how to restore faded trim, how to restore headlights, and finally how to fix sun damaged paint. I got this car for $500 and it wasn't running and was super dirty. Now the car runs and looks dripping wet! Website I found the car on: https://www.autotempest.com Ceramic Coating: https://avl.kg/ceramiccoating Compound: https://amzn.to/2UboLg7 Polish: https://amzn.to/3adde5g Wax/Sealant: https://amzn.to/2U9nMwF Buffing Microfiber Pad: https://amzn.to/33K0NvC Primer: https://amzn.to/3abA9Or Color Match Paint: https://amzn.to/3aaBUM3 Automotive Clear Coat: https://amzn.to/2QROt7p Wheel Cleaner: https://amzn.to/2J8VmN4 Tire/Wheel Shine: https://amzn.to/3djdbXH Detailing Brushes: https://amzn.to/33E9VSv 5000 Grit Sandpaper: https://amzn.to/2WABs5O Trim Adhesive: https://amzn.to/33CHrrZ How to Fix a $500 Car that Doesn't Start: How To SuperClean Your Engine: https://www.youtube.com/watch?v=PRSoRkM8GcM How To SuperClean Your Windshield: https://www.youtube.com/watch?v=vJkfrY2owb0 How To SuperClean Your Car: https://www.youtube.com/watch?v=CFXfSBR5Q9w → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Car wont start? Learn how to replace a fuel pump and fuel tank. I show you how to buy a car that wont start for $500 and fix it to make a $2100 profit. The car wont crank and the fuel pump and gas tank need to be replaced. I also show you how to replace the muffler so by the end of the video we have a really nice and reliable daily driver! CRAFTSMAN Mechanics Tool Sets: http://bit.ly/2PNfHLS Tools used in the video: 150 Piece Set: https://low.es/2PRQM9N Breaker bar: https://low.es/2vILlmD Saw: https://low.es/2x5XlyX 4lb Hammer: http://bit.ly/2PPtH7O Locking Pliers: https://low.es/2wwZZO9 Torque Wrench: https://low.es/3cCrsOL Screwdrivers: http://bit.ly/3cz0cRc Ratcheting Wrench Set: http://bit.ly/3cyZ8wS Haynes Service Manual: https://haynesmanualsallaccess.com/en-us/ Fire Extinguisher: https://amzn.to/2uYsPqf Ramps: https://amzn.to/2v16vfC OEM Fuel Pump Assembly: https://amzn.to/2PRS9VX Fuel Pump Locking Ring: https://amzn.to/3cwtwIa Muffler: https://amzn.to/2TKYJyE → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** #ChrisFix #HeyGuys #DIY #WeBuildPride #CRAFTSMANtools Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to install LED strip lights in the bed of your truck or under the hood of your car for less than $30. I show you how to wire the white LED strip lights with a push button switch and a magnetic switch so when you open the tailgate the lights come on automatically and illuminate the inside of the truck bed. You can also install the LED lights under the hood of your car so when you open your hood, the lights turn on automatically or with the push of a button. In this case we are working on a Ford Raptor pickup truck but the LED light installation process is the same on any vehicle. Be sure to check out The Straight Pipes car reviews!!! https://www.youtube.com/user/TheStraightPipes Products Used LED Light Strip: https://amzn.to/2S1AgV6 Magnetic Switch: https://amzn.to/2U6lJtJ Push Button Switch: https://amzn.to/38I1Ux4 Fuse: https://amzn.to/317NzqZ Very High Bonding Tape: https://amzn.to/2RB75cr Wire Connectors: https://amzn.to/2O8V5Nh Wire Protector: https://amzn.to/2uLFv32 Wire Crimper: https://amzn.to/36FMlEw Wire Stripper: https://amzn.to/37I0KkU Multimeter: https://amzn.to/36CsfuU Soldering Iron: https://amzn.to/38Uw1S5 → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Buying my Dad his dream car and surprising him with it out of nowhere was one of the best things I have ever done in my life. I surprised my dad with a new car and he did not expect it at all! We saved over 75% off of MSRP by not buying it from the dealership! With luxury cars it's better to let someone else buy it new and take the huge depreciation hit first. Then you can buy it at an amazing price with low mileage and just a few years old. We wrapped the car with an Indulgent Blue wrap to make it look amazing and we learned how to change the oil in an exotic car to save a ton of money! *All-in-one* used car search website: https://www.AutoTempest.com Where I got the large model car: https://amzn.to/2Q8Byxz Blue Wrap I got: https://amzn.to/39nBDoQ Ferrari Motor Oil: https://amzn.to/2Q71lX8 Portable Socket Set: https://amzn.to/36aMj8o Oil Lab Test Kit: https://www.blackstone-labs.com/ Pre Purchase Inspection Checklist: https://goo.gl/uqaWYa I Finally Bought My Dream Car: https://youtu.be/Z5x22ef7A-w → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

At this drift event, I took subscribers for ride alongs in the DriftStang to raise money for charity. Each ride was $10 and we raised a ton of money for St. Jude! It was so much fun to see each persons reaction when I flicked the car sideways for their first time! The DriftStang itself did great with drifting for a total of 24hrs and over 100 miles over the three day event. I had a blast taking all the ChrisFix fans for a ride in the car that they saw get built on YouTube! Helmet I wear: https://amzn.to/2raCGHp Torque Wrench: https://amzn.to/2Mcrwtd Impact Gun: https://amzn.to/2rVOIVJ In-car Camera: https://amzn.to/36X2PsK Tires (rear): https://amzn.to/2PEjPxS Tires (front): https://amzn.to/2ECrcQb Here is the guy who saved the day with the coil (John): YouTube.com/johnratchetstrap For everyone who shares this video I will be donating $1 to St. Jude's Childrens Hospital up to $25,000 so even the subscribers who couldnt make it to the drift event could help donate! → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Here are my Top 5 Christmas gift ideas for car guys and car girls. The gift ideas include the top tools this year that are useful, unique and not common. I also include stocking stuffers for even more gift ideas! These gift ideas are all products I personally use and like so much that I am wanted to share them with my fans! Meguiars Liquid Ceramic Wax: https://amzn.to/2LCX6Qf Meguiars Ceramic Detailing Spray: https://amzn.to/2E1eA4M Mequiars Ceramic Clay Kit: https://amzn.to/2P9QDie Microfiber Wash Mit: https://amzn.to/353tQtP Microfiber Drying Towel: https://amzn.to/2LFnRDH Microfiber Glass Towel: https://amzn.to/38mQYFG Microfiber Polishing Pads: https://amzn.to/2t1Nbxj Pressure Washer: https://amzn.to/2P6A8mY Nut/Bolt Extractor Socket Set: https://amzn.to/2LH35nf Universal Socket: https://amzn.to/36kZqU3 Nut Breakers: https://amzn.to/2sYSPjK Vampliers: https://amzn.to/2qD5CaN Smart Rear View Mirror: https://amzn.to/2t1OmNf Safety Hammer: https://amzn.to/2rx1w4y Foldable Shovel: https://amzn.to/2rwxFsY Battery Air Pump: https://amzn.to/2PaQjQl BlueDriver OBD2 Scanner: https://amzn.to/355Gwk0 LED Hood Light: https://amzn.to/2sWBojM LED Headlamp: https://amzn.to/2sYTu4I The Other Christmas Gift Idea videos I did: 1st year: https://www.youtube.com/watch?v=esMSQ8iF924 2nd year: https://www.youtube.com/watch?v=3-PZ4gE5o14 3rd year: https://www.youtube.com/watch?v=EOeOZPiF8qY → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Here is your chance to ride in some of the most amazing drag cars in the WORLD!!! Leroy, a 1500hp, twin turbo, 30psi of boost, bald eagle machine! Ruby a 1000hp turbo and nitrous C6 Corvette! Neighbor a supercharged 1000hp tire smoking Crown Victoria. And the most winningest NHRA drag car in the world, Dan Fletchers 350ci LS wheelie popping 69 Camaro! Cleetus McFarland: https://www.youtube.com/user/GARRETTmitch Dan Fletcher: https://www.instagram.com/danfletcheracing/ VR Camera I used for these shots: https://amzn.to/33jJkZ1 Honda Turbo Kit: https://amzn.to/2OIVBAP Gimbal I used: https://amzn.to/2shw4ay → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to turn off your airbag light and fix a horn that doesn't work by replacing your clock spring. Replacing a clock spring is very simple, saves us over $600 and takes less than an hour. I will show you how to safely remove the airbag and steering wheel so you can replace the clockspring at home using common hand tools. To figure out I had a bad clock spring, I used an obd2 scanner to scan the airbag light and got codes b1801 and b1811 which is an open squib circuit, which means the clock spring is bad. Another way to tell the clock spring is bad is the horn doesn't work and/or the steering wheel buttons don't work. OBD2 Scanner (BlueDriver): https://amzn.to/2q5sC1Z Service Manual for Torque Specs: https://haynes.com/en-us/ Steering wheel puller: https://amzn.to/2NUbofS Torque Wrench: https://amzn.to/33B3dvA Ratchet: https://amzn.to/2NzwZLt Threadlocker: https://amzn.to/2p7qKW3 Clock spring: https://amzn.to/2p53acj → As an Amazon Associate I earn from qualifying purchases. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Ever wonder what grade gasoline should you use in your car (what octane)? Are you paying for premium gas when you can just use regular? Are you using regular and damaging your engine? This video will bust all of the myths and tell you the FACTS on what fuel you should use and why. Many people throw money away and fill their car with the incorrect fuel every day. Running premium or midgrade in a car designed to run regular is a waste of money and has no HP or MPG benefits. You will not make more power or get better fuel economy running premium fuel if the car manufacturer tunes the car to use regular gas in most cases. I also see some people run regular gas in cars that need premium and the knock sensors have to adjust timing significantly to prevent damaging engine knock. I also hear a lot of people say that premium gasoline has more energy or burns cooler or slower so I will put a rest to all of these "myths" with facts. More info on fuels and additives: https://www.shell.us/motorist/shell-fuels/shell-v-power-nitro-plus-premium-gasoline.html Fuel Injector Machine I used: https://amzn.to/2MeGbnZ → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Come for a ride the ChrisFix DriftStang, a Mustang project car that was won for $1000 at a charity auction and turned into a drift car. I will take you out on the race track as you sit in the passenger seat! This was filmed with a Virtual Reality 180° so you can look at me clutch kicking and pulling the ebrake or you can look out the passenger side window to see us getting really close to the edge of the track! Cardboard VR Googles: https://amzn.to/2zL4ymh Inexpensive VR Googles: https://amzn.to/2MOYFNj VR Headset: https://amzn.to/2HDcpXw VR Camera that wont break the bank: https://amzn.to/2HC1rkY My Racing Seats: https://amzn.to/2NLZfuU My Helmet: https://amzn.to/2NIIv7W → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

I finally did it, I bought my dream car an AM General Hummer H1! Not only did I buy it, but in this video I take it off road, ford through flooded roads, and drive over cars and crush them. After years of hard work, dedication and passion, I was able to save up enough to buy a car, well technically a truck, that I have wanted since I was a kid. This video is super special to me and I hope you enjoy it! Also, there is a kinda-sorta ChrisFix face reveal in this video... Where I found my dream car: https://www.AutoTempest.com Surprising my Mom with her Dream Car: https://youtu.be/Quvby2Me5CM Buying a $300 Car: https://youtu.be/7VX090Fi63E Adhesion Promoter Paint: https://amzn.to/2Hn0o8k Matte Black Paint: https://amzn.to/2ZlzCU1 Measuring wheel (for the brake test): https://amzn.to/2ziUKQa Round Xenon Headlights: https://amzn.to/2L43Sxr Fluid Pump: https://amzn.to/322laSm For the helicopter and tank footage: The appearance of U.S. Department of Defense (DoD) visual information does not imply or constitute DoD endorsement. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Brake pad replacement? Ever wonder how to make brake pads? Usually I show you a DIY like how to replace brake pads, but in this video I show you how brake pads are made! Brake pads from this factory: https://www.NRSbrakes.com/nrs-chrisfix/ To make brake pads, we start out with raw pickled and oiled steel. The steel gets stamped into a brake pad backing plate which gets analyzed to make sure it meets OEM specifications. Next the brake pad backing plate goes to the NRS press to get a mechanical attachment. Then the backing plates get galvanized and finally brake pad friction material is added. The manufacturer can add and friction material they want such as semi-metallic, organic, or ceramic friction material. Lastly the shim is made and installed on the brake pad and they can be sent to testing! When it is all said and done, I took the brake pads we made and installed them on my truck with new brake rotors! The company that let me film in their factory is giving all of my fans 20% off their brakes using the code "20off" at checkout. I do not make any money from this! They are doing this to get you guys to try out their new technology brake pads and I will always share a discount to help my subscribers. Here is the link: https://www.NRSbrakes.com/nrs-chrisfix/ How to replace your own brake pads and rotors: https://www.youtube.com/watch?v=6RQ9UabOIPg How to Replace Drum Brakes: https://www.youtube.com/watch?v=Q5j3sKgNoEs Drum to Disc Conversion: Still working on this video → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Water pump replacement DIY. Learn how to replace a water pump at home using common hand tools. I was able to easily replace this water pump in under an hour and saved $783. Replacing the water pump on many cars is not difficult and this is a perfect example of an easy to replace water pump. You could do this entire job without any special tools and I spent under $60 in parts which is unbelievable after getting the $843 quote from the Jaguar dealership. I will also do a video on a more difficult water pump so you can see what is involved in that as well. Thanks PEAK for the coolant product placement in this video! My first every water pump replacement: https://www.youtube.com/watch?v=vTl6UNMKjLc How to Replace a Radiator: https://www.youtube.com/watch?v=MeruAZebIeU How to Flush Coolant: https://www.youtube.com/watch?v=s--5ft5YiHg Products: Coolant: https://amzn.to/2YYwm14 Water Pump: https://amzn.to/2MBv8Y2 Spill Free Funnel: https://amzn.to/2JW8Kqe Torque Wrench: https://amzn.to/2EQaP2R Plastic Gasket Scraper: https://amzn.to/2WlimBC Paint Marker: https://amzn.to/2WGcVwA Waterpump RTV: https://amzn.to/2F29bLV Scouring Pad: https://amzn.to/2EOWl3m → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Instead of installing an expensive car alarm system or using ineffective methods to prevent your car from getting stolen, learn how to install an inexpensive, hidden kill switch. http://simplisafe.com/dreamcar This kill switch is easy to install and anyone can do it at home with basic tools. It can also work along with your car's current alarm system. How it works is it cuts the power to the fuel pump so you cannot jump start the car, hot wire it, or even push start it. In order to steal the car you need to tow it! It is better than a batter quick disconnect because your computer wont restart and you wont lose your radio stations. Dream Car: https://www.youtube.com/watch?v=Z5x22ef7A-w Products Used: Automatic Wire Strippers: https://amzn.to/2GTH0zS Crimping Pliers: https://amzn.to/2DGxkqn On/Off Switch: https://amzn.to/2USastQ Heat Shrink Butt Connectors: https://amzn.to/2WdZpwt 16 Gauge Wire: https://amzn.to/2ZKsDVU Spade Connectors: https://amzn.to/2GTgab8 Inexpensive Multimeter: https://amzn.to/2XPyxTY → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace the ENTIRE front suspension of your car in this two episode series. Here I will show you how to install a brand new wheel bearing, ball joints, control arms, tie rod, strut, and axle. The ball joint and wheel bearing has to be pressed into the knuckle and I have a bunch of tips and tricks to make that easy. I show how to properly install a tie rod (safely) and get an accurate measurement so you can get the car aligned. I also show you how to properly torque down bolts with bushings so you don't tear them. The rest of the suspension parts are pretty simple to install and then we go for a ride to see how much better the car handles! First EPISODE: https://www.youtube.com/watch?v=mQ2fJ_aM_T0 How to Replace Sway Bar End Links: https://www.youtube.com/watch?v=VnrARhxhaSo How to Replace Wheel Bearing: https://www.youtube.com/watch?v=fe_WtKIKlYA Tools and Products: Mevotech Suspension Parts: https://amzn.to/2VKrmfr Rust Paint: https://amzn.to/2Dg5yAV Impact gun: https://amzn.to/2It3KIo Torque Wrench: https://amzn.to/2UO2yFY Bearing Press: https://amzn.to/2Gh8tv3 Ball Joint Press: https://amzn.to/2UTxEvR Silicone Paste: https://amzn.to/2DsSisN Grease Gun: https://amzn.to/2Iy11hm Chassis Grease: https://amzn.to/2IGc2g5 → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace the ENTIRE front suspension of your car in this two episode series. First I will show you how to remove the wheel bearing, ball joints, control arms, tie rod, strut, and axle. The ball joint and wheel bearing has to be pressed out of the knuckle and I have a bunch of tips and tricks to make that easy. The upper control arm ball joint and tie rod can get stuck in the knuckle so I show some tricks on how to easily remove that. The rest of the suspension parts are pretty simple to remove and replace. NEXT EPISODE: https://www.youtube.com/watch?v=V_g1-WHD4rw Tools and Products: Mevotech Suspension Parts: https://amzn.to/2VKrmfr Rust Paint: https://amzn.to/2Dg5yAV Impact gun: https://amzn.to/2It3KIo Torque Wrench: https://amzn.to/2UO2yFY Bearing Press: https://amzn.to/2Gh8tv3 Ball Joint Puller: https://amzn.to/2P2wmcH Slide Hammer: https://amzn.to/2URoqAe Ball Joint Press: https://amzn.to/2UTxEvR 4lb Hammer: https://amzn.to/2GhZ06A Vice: https://amzn.to/2IfqPyV → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

I show why is it important to not only fill your tires up to the correct pressure but also use the CORRECT AIR! Learn how to replace winter air, with summer air! Most people know when filling your car or truck tries that you need to fill it to the correct air pressure. What people dont know, is the air that goes into the tires is just as important. Winter air is cold, dry, and dense, therefore heavy while summer air is warm, humid, and light. Running winter air in the summer will cause lower tire pressure and decreased fuel economy (mpg). Running summer tire in the winter, will cause loss of traction and over inflated tires which could lead to a blow out! Thanks Engineering Explained for the collab: https://www.youtube.com/user/EngineeringExplained **Other helpful "How To" videos** How to Replace Blinker Fluid: https://www.youtube.com/watch?v=E6GsXhBb10k How to Replace Muffler Bearings: https://www.youtube.com/watch?v=eWdqlpxRA4I How to Replace Piston Return Springs: https://www.youtube.com/watch?v=oFX_Xq9WHTI Tools and Products Used: Left Handed Pliers Set (great value): https://amzn.to/2HS5F9C Valve Core Tool: https://amzn.to/2WBFGXm Air Pressure Gauge: https://amzn.to/2uESj85 Summer Air: https://amzn.to/2YFzwr5 Winter Air: https://amzn.to/2CPEto6 → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This was my first time ever drifting at a new track far away from my home track with the DriftStang! I ended up pulling a trailer behind the drift car and drifted 3 different tracks over the weekend. I took passengers, tried out my new carbon fiber racing helmet, and pushed my Mustang and my skills to the limits! I went from Raceway Park NJ to Pocono Raceway, over 140 miles each way towing a 1500lb trailer! I got to experience the Tricky Triangle and all of it's glory getting up to 80mph drifts and learning how to utilize the clutch kick and not just Ebrake all of the time. Thanks @kwesiray for the slow motion footage! Thanks @victoriapeyton_ for the photos of my car! Portable Luggage Tool Box: https://amzn.to/2E4NnPF Racing Helmet (expensive): https://amzn.to/2E6b3TK Original Helmet (inexpensive): https://amzn.to/2ByK55i The Drift Build Playlist: https://www.youtube.com/playlist?list=PLvKbarVtwhUtfd0HpR9IUCGGgXQRInyyu My First Time EVER Drifting: https://www.youtube.com/watch?v=sHWYtCQBcr4 Leveling up from C to B Group: → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace a clutch, flywheel, pressure plate, throw out bearing (aka release bearing), pilot bearing and rear main seal in this video! My clutch was fine but my throwout bearing was bad so I decided to show how to replace all of the wear items while the transmission was off. This includes replacing the pilot bearing which the transmission input shaft goes into, the throwout bearing which engages the pressure plate via the clutch fork, the flywheel which I upgraded to an aluminum light weight flywheel, and finally the rear main seal because that is a common wear item which causes oil leaks in higher mileage motors. With the transmission out, it is worth it to replace all of these parts now instead of having to do this all over again. Most clutch kits come with the throwout bearing and pilot bearing so you just need to buy a rear main seal. How to Replace a Transmission (Full DIY Guide): https://www.youtube.com/watch?v=al08aGQTkFk Thanks Advance Auto Parts for supporting the video. Flywheel I used: http://bit.ly/aap_flywheel Clutch kit I used: http://bit.ly/aap_clutch Rear Main Seal: http://bit.ly/aap_rear_main_seals → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Transmission removal, replacement, and installation. Learn how to remove a transmission so you can replace your clutch or flywheel, or so you can rebuild your transmission and install a new one in your car or truck. In this video I show you the 10 simple steps on how to replace a transmission. I am doing this on a rear wheel drive 98 Mustang but the process is very similar on other rear wheel drive, front wheel drive, and even automatic cars and trucks. Each detailed step will allow you to learn how to remove a transmission yourself so you can replace a clutch, flywheel, rear main seal, throw out bearing, pilot bearing, or just swap transmissions. Transmission Removal Checklist Download (FREE): http://bit.ly/TransmissionCheckList How to Replace a Clutch and Flywheel: https://www.youtube.com/watch?v=QcWELyTbdP4 Transmission Jack: https://amzn.to/2Swzw9h 12 Ton Jack Stands: https://amzn.to/2s1v1YN Ramps: https://amzn.to/2RnuRJD Dust Mask: https://amzn.to/2R0iNyA Dust Filters: https://amzn.to/2LJB7pC Flex-Head Ratchet: https://amzn.to/2s00CtM Torque Wrench: https://amzn.to/2BWMiqy Extendable Ratchet: https://amzn.to/2Sv8sHw Ratcheting Wrench Set: https://amzn.to/2VnhMis → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Prius hybrid battery replacement. Learn how to replace a hybrid battery in a 04-09 Toyota Prius and make money while you're at it! Replacing a hybrid battery is not difficult at all. I show you how to scan the computer to check the hybrid battery and we got a P0A80 code which means replace hybrid EV battery. I also show you how to clean the hybrid battery fan to keep the battery cool. To remove a Toyota Prius hybrid battery you remove a few interior trim pieces, unbolt the hybrid battery, swap out battery cells, and reinstall. While I did fix a Prius, you can apply the same process to many other hybrids like Honda, Chevy, Nissan, Ford, and Lexus. So whether you are Prius to fix and flip for a quick profit wheeler dealer style, or you want to fix your hybrid so you can continue to use it, here is the in-depth video on how to replace a hybrid battery safely and easily. **Where to get quality Hybrid Batteries:** https://www.electronautomotive.com Printable step-by-step directions: http://bit.ly/PriusHybridBattReplace Tools: OBD2 Scanner: https://amzn.to/2Dr0hHO Impact gun: https://amzn.to/2Tj9CH6 Panel Clip Pliers: https://amzn.to/2DH9IDF In-lbs Torque Wrench: https://amzn.to/2DpQq4M Ft-lbs Torque Wrench: https://amzn.to/2DlFDJ3 Plastic Trim Clips: https://amzn.to/2DLJuQy #YouTubeLearning → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Car wont start but cranks? Learn how to fix a car that turns over but wont start. I also show how to fix a car that has been sitting for a long time! I go though 5 quick steps on how to find the reason your car doesn't start! Every engine needs Fuel, Air, Spark, Compression and Timing. Tools and Products I used: Battery Charger: https://amzn.to/2pEs8ft Spray Fogging Oil: https://amzn.to/2pGSkpL Mechanic's Stethoscope: https://amzn.to/2C0ugW4 Spark Tester: https://amzn.to/2y4k0t8 Good Compression Tester: https://amzn.to/2Rw2c2c → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace rusty leaf springs, shackles, and leaf spring mounting brackets in your truck or suv. I also show how to replace leaf spring bushings and remove the rust and undercoat the frame of your vehicle. We lift the truck in the process by using Chevy/Dodge lowering shackles which fit the Ford Ranger/Mazda B-Series trucks. Torque Wrench: https://amzn.to/2NzkkKi Rounded Bolt/Nut Sockets: https://amzn.to/2WNbeum Extendable Ratchet: https://amzn.to/2xAdD0E 12 Ton Jack Stands: https://amzn.to/2OQExHY Rust Reformer: https://amzn.to/2Ie8i2S Undercoating: https://amzn.to/2IdoXE1 Leaf Springs: https://amzn.to/2N07AHA Shackles (for lifting the Ranger/B-series): https://amzn.to/2NAACm1 Leaf Spring Brackets: https://amzn.to/2NB2zue → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Leaking Radiator? Learn how to replace a radiator in your car or truck. Radiator replacement is easy and I show you how to replace your radiator hoses, thermostat, water pump and coolant. How to Super Flush your Cooling System: https://www.youtube.com/watch?v=s--5ft5YiHg CarQuest LIFETIME warranty Radiator: http://bit.ly/2OU5omX Hose Clamps: http://bit.ly/2OSexM6 Radiator Hoses: http://bit.ly/2OTbd3e No Spill Funnel: http://bit.ly/2ORwavo Flare-nut Wrenches: http://bit.ly/2OUAQ3w Thanks Advance Auto Parts for providing the radiator and supporting cooling system parts so I could make the video! → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to find exhaust leaks in your car or truck and then repair them without a welder using some common, inexpensive exhaust sealer products. To repair the exhaust leak you can use an exhaust putty, tape, or clamp. Exhaust Putty: https://amzn.to/2FAuYvJ Exhaust Tape: https://amzn.to/2TXThXH Exhaust Clamp: https://amzn.to/2n4X9b7 Sandpaper (100 grit): https://amzn.to/2KfXwsw Shop Vac: https://amzn.to/2AySXdc Electric Leaf Blower: https://amzn.to/2n5nOoc Ramps: https://amzn.to/2vaWI3s → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Hard work pays off! Drifting a Mustang is no easy feat. I drift the DriftStang at the track and finally move from C group to B group! This is the car I saved from the scrapper a year ago and learned how to drive stick shift with. I modified it with coilovers, dual calipers, an exhaust, intake, hydro ebrake, and racing seats. My Helmet: https://amzn.to/2zQcwx5 My First Time Drifting: https://www.youtube.com/watch?v=sHWYtCQBcr4 How Far the DriftStang has Come in 1 Year: https://www.youtube.com/watch?v=LfR4QfmwTAc Thanks @kilburgfilms for the "turn 1" video footage and @sodustyy for the thumbnail picture! → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace spark plugs, inspect spark plugs, gap spark plugs, figure out what spark plugs are best for your car and where to use antiseize and dielectric grease. I cover every aspect in spark plug and wire replacement all in one video! Again, thanks Advance Auto Parts for providing all of those spark plugs so I could make the video! Here is what I used: Spark Plugs: https://goo.gl/WDsqNE Spark Plug wires: https://goo.gl/SQ5CVs Tools: https://goo.gl/AxS53b Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace an intake manifold and intake manifold gaskets in your car or truck. I am upgrading my intake manifold from a non PI intake to a PI performance intake which will hopefully add some Horsepower and Torque! I also show you how to install a water pump, and how to tap the intake port for a coolant temperature sensor. Performance Intake: https://amzn.to/2L5klQD Extendable Ratchet: https://amzn.to/2xiKUje Torque Wrench: https://amzn.to/2IRnTsW 3/8's Tap and 37/64" Drill Bit set: https://amzn.to/2LBHV8s Center Punch: https://amzn.to/2GXMPcl Heater Tube and Fitting: https://ebay.to/2GYFuJt Intake Manifold Gasket: https://ebay.to/2skKQJP No Spill Coolant Funnel: https://amzn.to/2Jch6cF → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Spray paint your valve covers and your engine with a rattle spray can and get amazing results. In this video I show you how to use rattle can spray paint to paint the valve covers and other car parts in your engine bay so they come out looking amazing! Paint/Dust Mask: https://amzn.to/2rg3rXT Primer: https://amzn.to/2HRnZMo Silver Paint: https://amzn.to/2jo4a4N Blue Paint: https://amzn.to/2FCNizT Other Colors of High Temp Paint: https://ebay.to/2HLw5KE Clear Coat: https://amzn.to/2KrEPDn Paint Markers: https://amzn.to/2rg2YVD Isopropyl Alcohol: https://amzn.to/2HNEFo9 Paint Stripper: https://amzn.to/2JPo83x → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Blown Head gasket? Learn how to replace your head gasket and piston return springs so your car or truck can run and drive again! In this video I show you how to replace the piston return springs and the head gasket on a 200k mile Honda Del Sol and get her back on the road! Get your Own Blinker Fluid, Muffler Bearing, and Piston Return Springs HERE: http://www.ChrisFixed.com/store.php Car OBD2 Scanner: https://amzn.to/2GqB2nq Impact Gun: https://amzn.to/2pYgQ5h Torque Wrench: https://amzn.to/2pUoiz7 Head Gasket: https://ebay.to/2GKdmhf How to Replace Blinker Fluid: https://www.youtube.com/watch?v=E6GsXhBb10k How to Replace Muffler Bearing: https://www.youtube.com/watch?v=eWdqlpxRA4I → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to buy a used car for $300. I show you where to find inexpensive used cars that need work so you can fix them up and have a reliable car. I also show you test driving the car, negotiating with the owner, and go over what needs to be fixed! This is how to inspect a used car for purchase! Replacing the Head Gasket: https://www.youtube.com/watch?v=oFX_Xq9WHTI AutoTempest Used Car Search: https://goo.gl/6L8Yeq Quick Jack Lift: https://goo.gl/9ZTjfr Used car checklist: https://goo.gl/pbw5Nq Inexpensive Aluminum Radiator: http://ebay.to/2GQkYwo → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Universal joint replacement and U joint noise. Learn how to tell if your u joints are bad and how to replace u joints in this in-depth, how-to video that covers every aspect of u joint replacement! I show you the three symptoms of a bad u-joint, how to remove the driveshaft, and how to replace the universal joint with a press and a hammer. Again, thanks Advance Auto Parts for providing all of those universal joints so I could make the video! Here is what I used: High Strength U-Joints: https://goo.gl/u7YFKD U-Joint Press: https://goo.gl/tvBZ92 U-Joint Grease: https://goo.gl/XWrKYu Grease Gun: https://goo.gl/nfmph6 → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to get extreme steering angle for your drift car! Not only will you learn how to install an angle kit, but you will learn how to replace the entire front suspension including the lower control arm, wheel bearing, tie rods, coilovers, sway bar, steering knuckle, and brakes. Tools and Products Bump Steer Kit: http://amzn.to/2DvleBE Angle Kit: https://goo.gl/5ZiZQK Extendable Ratchet: http://amzn.to/2DzNH9x Wrench Set: http://amzn.to/2Dty2cA Torque Wrench (goes to 250ft-lbs):http://amzn.to/2DV6WrY Thread locker: http://amzn.to/2BfMCi2 Antiseize: http://amzn.to/2roe8Kz Electric Cutoff Wheel: http://amzn.to/2DlXvk8 Wheel Bearing: http://amzn.to/2DztiRM Stiffer Springs: http://amzn.to/2Dm936Q Thanks Chris Forsberg for footage of his car: https://www.youtube.com/user/chrisforsbergracing → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

What is it really like to have a project car for one year? I show you how far my drift car, the DriftStang, has come with a new fuel pump, supercleaning, and ebrake, to coilovers, exhaust, and angle kit! All of these modifications were done in my driveway with common hand tools! I also show you how much better I am getting at drifting! Adam LZ also drifts my car which was a lot of fun! Every DriftStang Video is listed, in order, here (day I got it, fuel pump, cleaning, coilovers, etc): https://www.youtube.com/playlist?list=PLvKbarVtwhUtfd0HpR9IUCGGgXQRInyyu Coilovers: http://amzn.to/2CIZiQR Racing Seats: http://amzn.to/2EJM5YD Exhaust System: http://amzn.to/2CyJpyI Big thanks to: AdamLZ for our YouTube Collaboration: https://www.youtube.com/LZBMX https://www.Instagram.com/Akina86 for getting the outside footage of me drifting and of the fire! https://www.SoundCloud.com/avesena for the epic Christmas song remix Intro of Christmas song remix by INDIGO: https://www.facebook.com/indigoxmusic Everyone who has helped me out this year big or small! You guys are awesome! → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Top 5 Christmas Gift Ideas. Here are all of the coolest gadgets and tools for this year. I also include stocking stuffers for even more gift ideas! These gift ideas are all products I personally use and like so much that I am willing to share them with my fans! ChrisFix Gear: http://bit.ly/ChrisFixSwag Bolt Buster: http://amzn.to/2Bcw2mu Jumper Cables: http://amzn.to/2kqcp0i Tire Pressure Monitoring System: http://amzn.to/2BfFwxK ZUS Smart Car Charger: http://amzn.to/2kp3Xys Thrive Knee-Pad Pants: https://goo.gl/YaDQDT Pen LED Light: http://amzn.to/2DCjHYh Stick LED Light: http://amzn.to/2AOLAuJ Electric Ratchet: http://amzn.to/2l2mUem Extendable Ratchet: http://amzn.to/2z3yxXb Teng Tool Kit (slightly different): https://goo.gl/PHcvqG Digital Tire Inflator: http://amzn.to/2reQxMm Other Christmas Gift Idea videos I did the next year: 1st year: https://www.youtube.com/watch?v=esMSQ8iF924 2nd year: https://www.youtube.com/watch?v=3-PZ4gE5o14 Pull-A-Part Challenge show I was on: https://goo.gl/yKEiFZ ___________________________________________ → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. Thank you Nonda and Thrive for supporting the video. All opinions in this video are truthfully my own. I use their products all of the time which made it a great fit for the video! Merry Christmas and Happy New Year!

Buying my Mom her dream car and surprising her with it out of nowhere was one of the best things I have ever done in my life. I have been saving up since high school to do something like this and I am very fortunate and blessed. You can also learn how to buy a used car from this video as I cover many tips and tricks! *All-in-one* used car search AutoTempest: https://www.AutoTempest.com I Finally Bought My Dream Car: https://youtu.be/Z5x22ef7A-w Used car checklist: https://goo.gl/uqaWYa Car Computer Scanner: http://amzn.to/2zdjBax Chrome Vinyl Wrap: http://amzn.to/2j562yZ Bloopers: https://goo.gl/eAuN87 → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Rust removal and repair. Repairing rust on your car is something that should be done quickly to prevent it from spreading. It can be easily done without welding, by using strong but inexpensive body filler. You can even paint the car yourself. Rust repair is common at the wheel wells and rocker panels of cars and in this video I show the proper and most thorough way to remove and repair rust. Products: Glass Filler: http://amzn.to/2zdSA6o Gold Filler: http://amzn.to/2xtzWTx Adhesive Remover: http://amzn.to/2zduvfU Sandpaper: http://amzn.to/2gQph2b Spot Putty: http://amzn.to/2yauidi Body Patch Mesh: http://amzn.to/2iGmSri Polish: http://amzn.to/2zcSOe2 Dust Mask: http://amzn.to/2xu4017 Sanding Block: http://amzn.to/2iaKNLM Paint: Rust Converter: http://amzn.to/2iGmFo0 Rubberized Undercoating: http://amzn.to/2hmXD9N Filler Primer: http://amzn.to/2xuIrxI Color Matching Paint: https://amzn.to/2IYlFEP Power Tools: Rust Remover Disc: http://amzn.to/2zzXSq2 Polisher: http://amzn.to/2yT243Z → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by 3M and all opinions are my own. I use 3M products for my projects so this was a perfect fit for a rust repair video!

Learn how to get more steering angle so your car can make sharper turns by removing rack limiters in the steering rack. That way you can make a U turn instead of a K turn. This works for cars that have steering rack limiters (spacers) and can be quick and easy to do. Wheel Spacers/Adapters I used: http://amzn.to/2xja77K Jack I use: http://amzn.to/2yqk7kH Jack Stands: http://amzn.to/2z03qJS Antiseize: http://amzn.to/2kp6dci Camera I use to film these videos: http://amzn.to/2y0MTXr → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Want a LOUD exhaust? Does an Exhaust System make more Horsepower and Torque? Learn all the tips and tricks on how to install a performance cat back exhaust system with high flow cats, an X pipe, and straight pipes. Watch as I dyno my car before and after the exhaust system installation to see if we make more horsepower and torque! Plasma Cutter: http://amzn.to/2wqIVbx Exhaust System: http://amzn.to/2wncg6D X-pipe: http://amzn.to/2xJ9t8g Impact Gun: http://amzn.to/2xIc56c Homemade Penetrating Fluid: https://youtu.be/2WuVBFTzoKc O2 Sensor Sockets: http://amzn.to/2xJsyY7 Ramps: http://amzn.to/2fcrFzq Reciprocating Saw: http://amzn.to/2wose0A Extendable Ratchet: http://amzn.to/2xetiTg → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Rebuild a limited slip differential with new carbon clutches so you can get more traction. Replacing the clutch pack in an LSD is really simple and anyone can do it at home after watching this video! I also show you how to replace the differential cover and change the gear oil. Carbon Fiber Clutches: http://amzn.to/2wLe1Hw Aluminum Diff Cover: http://amzn.to/2vzmfE3 Oil Pump: http://amzn.to/2w5yTfs Friction Modifier: http://amzn.to/2wKMrdf Gasket: http://amzn.to/2vDVkVR Stick Magnet: http://amzn.to/2fGmYO0 Gear Oil: http://amzn.to/2wLhJAH Locking Needle Nose Pliers: http://amzn.to/2vEx1r0 Bench Vice: http://amzn.to/2vzgqqa How to Install Dual Calipers: https://www.youtube.com/watch?v=gjqeFEyaUxc → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

DIY four to five lug conversion and wheel bearing replacement. In this video I show you how to do a 4 to 5 lug conversion on a Nissan 240sx owned by YouTuber SaabKyle04, but this applies to any 4 lug car. You can also use this process to go from a 5 to 6 lug on a truck or even 6 to 5 lug if you want. You are basically replacing the wheel bearing and hub assembly so this lug conversion applies to many different cars and trucks. SaabKyle's Channel and 240sx RestoMod: https://www.youtube.com/saabkyle04 Tools and Parts: 5 Lug Hub Conversion Kit: http://amzn.to/2tJ1E0G Locking Lug Nuts: http://amzn.to/2uwWaFe Extendable Ratchet: http://amzn.to/2tJAneI Breaker Bar: http://amzn.to/2uAW9hD Torque Wrench: http://amzn.to/2uBrG2Y Thread Locker: http://amzn.to/2uwX0BR Antiseize: http://amzn.to/2h1Y5gi → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Engine bay detailing. Learn how to Super Clean your engine bay so that it is so clean, you can eat off of it! I show you how to clean and detail the engine bay in a simple 5 step process that will NOT damage your engine or electrics! Cleaning Wipes (Tub-O-Towels): http://amzn.to/2u7CgAD Soapy Wooder: https://goo.gl/hsebW4 Microfiber Towels: http://amzn.to/2sKi2cR Brushes: http://amzn.to/2sKgwau Trim Restorer: http://amzn.to/2sJLmjP Spray Wax: http://amzn.to/2sZ96og Pipe Cleaners: http://amzn.to/2sJzA8R Fabric Dye: http://amzn.to/2v62qks Metal Wire Brush: http://amzn.to/2u2VPL7 Rotary Tool: http://amzn.to/2v6lVcI Paint Markers: http://amzn.to/2ucPEUW How to SuperClean your Car: https://www.youtube.com/watch?v=CFXfSBR5Q9w&list=PLvKbarVtwhUs7sIm9Hc9VgANltYl8_DwC How to SuperClean your Windshield: https://www.youtube.com/watch?v=vJkfrY2owb0&list=PLvKbarVtwhUs7sIm9Hc9VgANltYl8_DwC How to SuperFlush your Cooling System: https://www.youtube.com/watch?v=s--5ft5YiHg&list=PLDD611CFB36FC65F2 → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by Federal Process Corporation and all opinions are truthfully my own. I use their stuff all of the time when cleaning my engine bays which made it a great fit for the video!

Repair a chipped windshield. Learn how to repair a chip or crack in your windshield so it comes out like it was never chipped. Single-use kit (2 for one deal): http://amzn.to/2roykHO Multiple chip kit: http://amzn.to/2sa87Q2 UV Light: http://amzn.to/2rEIyTE Hammer I used: http://amzn.to/2rF9bYu Window Breaking Hammer: http://amzn.to/2twFGtq Original "How to repair a windshield": https://www.youtube.com/watch?v=QjuWqBzO7qY&list=PLDD611CFB36FC65F2 How to restore headlights: https://www.youtube.com/watch?v=UEJbKLZ7RmM&list=PLDD611CFB36FC65F2 How to fix a bullseye chip: https://www.youtube.com/watch?v=YK1kpSZpMPM → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Lower your car with coilovers. I show you the process of lowering your car and then getting it aligned and finally going to the track where we put the new coilovers to the test! Coilovers: https://goo.gl/aAwwKq Spring Compressor: http://amzn.to/2qzlRAv Torque Wrench: http://amzn.to/2rmdZp0 Impact Gun: http://amzn.to/2rSsmCm Ratcheting Wrenches: http://amzn.to/2qxJdu9 Swivel Ratchet: http://amzn.to/2qZ00ph Pliers: http://amzn.to/2r6Zhi5 How to install front coilovers (and benefits): https://www.youtube.com/watch?v=8Qou-MDcYKA → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Coilover installation. Learn the benefits of adjustable coilovers such as lowering your car, stiffening your suspension, and adjusting camber. Also learn how to install coilovers and camber caster plates in your car with this in-depth video. After watching this video you will know how to install coilovers in your own car! How to install rear coilovers (with TRACK footage): https://www.youtube.com/watch?v=dpc_5-TTFNY Quality Coilovers: https://goo.gl/aAwwKq Camber Caster Plates: http://amzn.to/2rjPSZa Cobalt Drill Bits: http://amzn.to/2rjGSDh Paint marker: http://amzn.to/2qmeI5K Swivel Ratchet: http://amzn.to/2qZ00ph How to Install Rear Coilovers/First Test Drive: Coming this MONDAY!!! → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to install aftermarket seats in your car. In this video I install bucket racing seats in my car for more side support, safety, and comfort on the track and on the road. I cover everything you will encounter when installing racing seats from using floor mounting brackets and side mount brackets, how to route the seatbelt (and future harnesses), and more! Tools/Products I Used Racing Seats: https://goo.gl/NFK3zP Cobalt Drill Bits: http://amzn.to/2pkHKqt Electric Drill: http://amzn.to/2q3xFOa Metal Punch: http://amzn.to/2q3Akah Paint Marker: http://amzn.to/2qsmJuv Takata Racing Harnesses: http://amzn.to/2qTxQw0 Swivel Ratcheting Wrench set: http://amzn.to/2r4017Y How to Pick Out Racing Seats: https://www.youtube.com/watch?v=ugWuTk-A5Fw&list=PLvKbarVtwhUtfd0HpR9IUCGGgXQRInyyu DriftStang Project Playlist: https://www.youtube.com/playlist?list=PLvKbarVtwhUtfd0HpR9IUCGGgXQRInyyu → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Hydro E brake installation. Learn how to install a Hydro ebrake in your drift car. I show how to build a completely bolt in hydro mount that doesn’t require cutting the interior. I also show how to run brake lines and bleed the brakes so there is no air in the lines. Then we go out for a ride and test it out to see if it locks up the rear wheels! Tools and Products I used: Hydraulic Ebrake: https://goo.gl/d5mPQb Stainless Steel Brake Hose: http://amzn.to/2oVbkzq Brake T-adapter: http://amzn.to/2o91KvK -3AN to Caliper fitting: http://amzn.to/2o91Mnm Vacuum Fluid Extractor: http://amzn.to/2pJ26GI Cobalt Drill Bits: http://amzn.to/2o8WEzJ Metal Cutting Saw: http://amzn.to/2oVg2gy Rubber Hose Clamps: http://amzn.to/2o9aOAL Metal Center Punch: http://amzn.to/2oGWknn Dual Caliper video: https://www.youtube.com/watch?v=gjqeFEyaUxc Make your own brake bleeder: https://www.youtube.com/watch?v=1wwq1Vlk4Wg → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Muffler Bearings... I always get asked how to replace muffler bearings so here is how! Make sure you share this with friends who don't know how to replace their muffler bearings! Get your own Muffler Bearings and Blinker Fluid: http://chrisfixed.com/store.php How to Replace Blinker Fluid: https://www.youtube.com/watch?v=E6GsXhBb10k&list=PLDD611CFB36FC65F2 How to Replace Piston Return Springs: https://www.youtube.com/watch?v=oFX_Xq9WHTI Thanks to Subscriber Milene for sending footage of his Honda with a bad muffler bearing for me to use! Tools and Products I used: Muffler Bearing: https://goo.gl/L152MH Electric Impact Gun: http://amzn.to/2olAsls Electric Saw: http://amzn.to/2nUkTAg Telescoping Magnet: http://amzn.to/2nspLty Soapy Wooder: https://goo.gl/GAaM1n Elbow Grease: http://amzn.to/2nUxy6c Blinker Fluid: https://goo.gl/kv6f87 Subscribe → http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram → https://www.instagram.com/chrisfixit Facebook → https://www.facebook.com/chrisfix8 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** THIS VIDEO IS A PARODY. IT IS A JOKE! THERE IS NO SUCH THING AS MUFFLER BEARINGS, BLINKER FLUID, OR ELBOW GREASE!!! HAPPY APRIL FOOLS DAY!!! Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Aftermarket Racing Seats. Learn how to properly chose what aftermarket racing seat is good for you. I go over which seat material is right for you (aluminum vs composite), how to measure yourself so you know you will properly fit in the seat, how to measure your car so you know the seat will fit in the car, and what hardware you need to get to mount the seat! Where I got my seats (with prices): https://goo.gl/6XOiIT They said you guys can call them with any ?s (973) 773-3177 Impact Gun I used to remove the seats: http://amzn.to/2oahueo Mic I use: http://amzn.to/2nrcUZ2 Thank you Stable Energies for not only allowing me to film at your store but for helping me make sure I cover the most commonly asked questions about racing seats! → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Brake Calipers. Learn how to install dual brake caliper brackets and dual brake calipers as well as replace the differential fluid, replace the rear wheel bearing, and the replace the bearing seal on your car or truck. This process works on a live rear axle. I am prepping my drift car for this upcoming season by installing a dual rear brake caliper setup so I can use a hydro ebrake. How to Install a Hydro Ebrake: https://www.youtube.com/watch?v=eWmmqLP0hWc How to Properly use RTV: https://www.youtube.com/watch?v=21CvanhKILA&list=PLDD611CFB36FC65F2 How to Flush and Bleed Your Brakes: https://www.youtube.com/watch?v=n1NvtUwfRJc&list=PLvKbarVtwhUsr7OjYE7NEEXw97DvmmNeE Again, thanks Advance Auto Parts for providing Carquest Wearever Professional Brake Parts for the rear of the DriftStang: Calipers: https://goo.gl/cregcS Brake Pads: https://goo.gl/HA5UEK Rotors (2008 and newer models are painted): https://goo.gl/1qEA5j → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. This video was supported by Advance Auto Parts and all opinions are truthfully my own. I already shop there and use their brakes on my cars so it was a perfect fit! ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to leather cover and refinish your car's steering wheel. I show you everything you need to know from how to remove your steering wheel, remove the airbag, and more so you can wrap your steering wheel with a new leather cover that looks amazing! Steering wheel puller: http://amzn.to/2lKB56i Strong Thread: http://amzn.to/2lAvgWN Curved Needles: http://amzn.to/2le5gPT Leather Glue: http://amzn.to/2lAmbNy Sharp Scissor: http://amzn.to/2mhC77j Leather Kit (pre-drilled holes): http://amzn.to/2mhEXtd Steering wheel slip on covers: http://amzn.to/2lKxViA Vinyl I used: Picked up at local upholstery shop so I could color match → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

We have all seen the airbag prank videos but how far can an airbag launch a football? In this video I try to see how far I can get a football down the field using just an airbag! I also try to get a field goal using an airbag. 1000FPS camera: http://amzn.to/2jURY9v Football I used: http://amzn.to/2jUhSPC → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Stop your brakes from making squeaking and grinding noise! I show you the top 5 reasons your brakes make noise and how to fix them so they stop making noise! I cover checking brake pad and brake rotor wear, brake contamination, brake hardware, brake lubrication, and the dust shield. Why you need to grease your guide pins: https://www.youtube.com/watch?v=Gdc3PZ0gFvA&list=PLvKbarVtwhUsr7OjYE7NEEXw97DvmmNeE Top 10 Brake Job Tips: https://www.youtube.com/watch?v=xJDOuZzEAQc&list=PLvKbarVtwhUsr7OjYE7NEEXw97DvmmNeE How to Flush and Bleed Your Brakes: https://www.youtube.com/watch?v=n1NvtUwfRJc&list=PLvKbarVtwhUsr7OjYE7NEEXw97DvmmNeE Replace Drum Brakes: https://www.youtube.com/watch?v=Q5j3sKgNoEs&list=PLvKbarVtwhUsr7OjYE7NEEXw97DvmmNeE Again, thanks Advance Auto Parts for Providing Carquest Wearever Professional Brake Parts so I could compare the old and new brakes so you can see the difference! Here is what I used: Quiet Brake Pads: https://goo.gl/jtDSvH Rotors: https://goo.gl/27FudG Antisieze: https://goo.gl/07YWWc Brake Hardware: https://goo.gl/uFqzSd → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. This video was supported by Advance Auto Parts and all opinions are truthfully my own. I already shop there and use their brakes on my cars so it was a perfect fit! ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Drifting the DriftStang in the rain! Watch as I learn how to get sideways in the DriftStang for the second time ever and first time in the rain! The Start of the Drift Car Project (1st Episode): https://www.youtube.com/watch?v=_ryGH_aTgS4&list=PLvKbarVtwhUtfd0HpR9IUCGGgXQRInyyu ChrisFix Key Chains: http://chrisfixed.com/store.php Helmet I use: http://amzn.to/2cUBvow Tow Straps: http://amzn.to/2csmN1O Digital Tire Pressure Gauge: http://amzn.to/2hhbqzS Impact Gun: http://amzn.to/2gGaBzz 50 Cal Bullet Antenna: http://amzn.to/2jQlKxT Credits: (check them out on instagram) Winter Drift Footage: Jeff Beverly- @akina86/Section9 Video DriftStang Track Video: Stanley @doriftosquad → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to diagnose and replace a starter in your car or truck. In this video I show you the common causes of a car that doesn't turn over, and then I show you how to replace the starter along with many tips and tricks to make the job go easier and better. Starter I used: https://goo.gl/dpUUWI Mutltimeter: http://amzn.to/2ja4Axd Battery Load Tester: http://amzn.to/2ifhMRK Battery Charger: http://amzn.to/2iiD9wN Swivel Ratchet: http://amzn.to/2j9VGzQ Universal Joint Adapter: http://amzn.to/2iuiNnO Thread Locker: http://amzn.to/2jxRqXv Silicone Paste: http://amzn.to/2ja5Q3A Thank you AutoZone for the support and letting me film in the store. Here is more info about how to check your starting system: https://goo.gl/qfSiVF. They also will load test your battery for free. #HoodsUpAmerica → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by AutoZone and all opinions are mine. I commonly go to AutoZone for parts and products so this was a great fit!

ChrisFix Gold Play Button! Here's my 1 Million Subscriber Gold Play Button celebration burnout!!! Thank you everyone who has supported me and I cannot wait to show you what is in store for this year! From burnouts, to drifting, to DIY, to HOW TO, to parts cars, to police cars, to road trips, this year has been beyond epic and I am truly thankful to all who have supported me! Thank You!!! New Drift Video: https://www.youtube.com/watch?v=2SgYHAdBkMM Project Police Interceptor: https://www.youtube.com/playlist?list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Drift Car Build Series: https://www.youtube.com/playlist?list=PLvKbarVtwhUtfd0HpR9IUCGGgXQRInyyu How to Buy a Used Car: https://www.youtube.com/playlist?list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Thanks to GarageMonkey for putting together the "Road to SEMA" and YouTubers Humble Mechanic and SubaruWRXFan for helping me with some roadtrip footage! ChrisFix PO Box 220 Tennent, NJ 07763 → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Drum brake replacement. Learn how to replace your drum brakes including the wheel cylinder and bleeding the brakes. This is the only video you need to watch to learn everything you need to know about replacing drum brakes! Drum to Disc Brake Conversion: COMING SOON! How to Replace Disc Brakes: https://www.youtube.com/watch?v=6RQ9UabOIPg&list=PLDD611CFB36FC65F2 How to Make a One Man Bleeder (under $5): https://www.youtube.com/watch?v=1wwq1Vlk4Wg&list=PLDD611CFB36FC65F2 How to Flush Your Brakes: https://www.youtube.com/watch?v=n1NvtUwfRJc&list=PLDD611CFB36FC65F2 Again, thanks Advance Auto Parts for Providing Carquest Wearever Brake Parts so I could make the video! Here is what I used: Brake Shoes I used: https://goo.gl/2mpPD6 Drums I used: https://goo.gl/RE0NCg Wheel Cylinders I used: https://goo.gl/YNchpV → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. This video was supported by Advance Auto Parts and all opinions are truthfully my own. I already shop there and use their brakes on my cars so it was a perfect fit! ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Here are my Top 5 Christmas Gift Ideas as well as stocking stuffers for car guys and car girls! These gift ideas are all products I use and like so much that I am willing to share them with my fans! These are good gifts for guys and good gifts for girls. ChrisFix Gear (world wide shipping): http://bit.ly/ChrisFixSwag 3D Printer: http://amzn.to/2hysL8q Cheaper 3d Printer: http://amzn.to/2hHZ1lj Hand/Tool Cleaner Wipes: http://amzn.to/2iI6e8G Tool Box: http://amzn.to/2hyDkrK Breaker Bar: http://amzn.to/2hHHhGR Pliers: http://amzn.to/2hhgp3j Digital Tire Pressure Gauge: http://amzn.to/2BwQlga Red Impact Gun: http://amzn.to/2gGaBzz Orange Impact Gun: http://amzn.to/2gBIsLY Impact Socket Set: http://amzn.to/2hnMSWb Torque Wrench: http://amzn.to/2hHPkDm Foam Cannon: http://amzn.to/2brRODT Favorite Wax: http://amzn.to/2aTwIMQ Wash glove: http://amzn.to/2hHKyWG Microfiber Towels: http://amzn.to/2hnAxkM Other Christmas Gift Idea videos I did the next year: 1st year: https://www.youtube.com/watch?v=esMSQ8iF924 2nd year: https://www.youtube.com/watch?v=EOeOZPiF8qY Thank you to all of my subscribers for the amazing support! Merry Christmas, Happy Hanukkah, and Happy Holidays to all! → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by Federal Process Corporation and all opinions are truthfully my own. I use their stuff all of the time which made it a great fit for the video! Merry Christmas and Happy New Year!

Learn how to strip a parts car down to the frame so you can get all the car parts you need for your car and sell the extras to make a profit! I can actually pay for the parts car, and my good car with these parts! The best part was my dad's reaction at the end! Priceless! Where I got the Parts Car: https://goo.gl/TQr4PM Ramps I use: http://amzn.to/2g3CzXw Impact Gun: http://amzn.to/2hcq4ZP Panel Removal Tools: http://amzn.to/2g3AQBs Hose Clamp Pliers: http://amzn.to/2g4APIE LED Light: http://amzn.to/2hcpoUp Paint Marker: http://amzn.to/2hctz2s Where I got my car towed and made money: https://goo.gl/q1JvhY Here is my Parts List: http://chrisfixed.com/JaguarPartsCar.pdf How to Buy a Used Car (how I got the Jag): https://www.youtube.com/playlist?list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn when you should buy a "parts car", how to buy a parts car, and how to make money off the parts you remove from the car. In this episode I fix my Jaguar using parts from a another Jaguar, but first I show you the process of getting a parts car and how profitable it can be if you do it right! Tools Used in the Next Video: Ramps I use: http://amzn.to/2gerpOH Battery Impact Gun (awesome): http://amzn.to/2gEqWmN Trim Removal Tool: http://amzn.to/2geun5v How to Inspect a Used Car for Purchase: https://www.youtube.com/watch?v=vC8LbvYk6es&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Final Episode (ep.2): https://www.youtube.com/watch?v=8ECB-Nyx2bo → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Short throw shifter. In this video I show you how a short shifter works and how to install one in your car. I also compare the difference between a stock shifter and an aftermarket short throw shifter so you can see the drastic improvement in the DriftStang! Short Shifter: https://goo.gl/IhF5R5 Thread Locker: http://amzn.to/2eWFcYY Feeler Gauge: http://amzn.to/2eSqAq4 RTV Gasket Maker: http://amzn.to/2fP16Lr Small Torque Wrench: http://amzn.to/2g9y2T8 Plastic Gasket Scraper: http://amzn.to/2eSs6IR Bushing: https://goo.gl/69iSgj Silicone Gasket: https://goo.gl/g9M7ay *This exact procedure works on 1982-2004 Mustangs with a T5 or T45 manual transmission. The process is similar on most other manual cars. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to Fix a Flat Tire yourself so you can get back on the road! I show the entire process of fixing a flat tire from how to inflate the flat tire, how to find the leak in the tire, to how to plug the tire so you can fill it up with air and drive on it safely. Tools used: 12v Air Pump (cheap): http://amzn.to/2dX2CwT 12v Air Pump (better quality):http://amzn.to/2eVv2VA Tire Plug Kit: http://amzn.to/2dKNBuE Can of air/sealant: http://amzn.to/2f7Nxvd Screw removal pliers: http://amzn.to/2dKRG2a Digital Tire Pressure Gauge: http://amzn.to/2eTw1pk Jack: http://amzn.to/2eIbnt2 Soapy Wooder: http://chrisfixed.com/store.php → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Need new brake pads and rotors? If you have never replaced brake pads and rotors before, after watching this video, you will know how! I show you every step including how to remove the old pads and rotors, how to install the new pads and rotors, where to use brake grease, how to grease the guide pins, and how to torque the bolts for a safe and complete brake job. Save money, do the job right, and feel proud to work on your own car! Why you need to grease your guide pins: https://www.youtube.com/watch?v=Gdc3PZ0gFvA&list=PLvKbarVtwhUsr7OjYE7NEEXw97DvmmNeE Top 10 Brake Job Tips: https://www.youtube.com/watch?v=xJDOuZzEAQc&list=PLvKbarVtwhUsr7OjYE7NEEXw97DvmmNeE How to Flush and Bleed Your Brakes: https://www.youtube.com/watch?v=n1NvtUwfRJc&list=PLvKbarVtwhUsr7OjYE7NEEXw97DvmmNeE Replace Drum Brakes: https://www.youtube.com/watch?v=Q5j3sKgNoEs&list=PLvKbarVtwhUsr7OjYE7NEEXw97DvmmNeE Thank you Advance Auto for the support to make this video. It's awesome to get help with the brakes for my car: Brake Pads: https://goo.gl/fWxhaJ Rotors: https://goo.gl/kTP9H3 Brake Piston Tool: https://goo.gl/82VcG2 Thread Locker: https://goo.gl/SGrk24 Antisieze: https://goo.gl/R9YOHa → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by Advance Auto Parts and all opinions are truthfully my own. I use their brakes on all of my cars so it was a perfect fit!

Drifting! Watch as I learn how to get sideways in the DriftStang for the very first time! I do a burnout to see if the rear end locks up. Then I make my way to the track! See first hand how to drift the Mustang and what is involved in going to your first track event! I then take you for a ride with world champion drift car driver, Chris Forsberg, to see what it's like when a pro is driving! The Start of the Drift Car Project (1st Episode): https://www.youtube.com/watch?v=_ryGH_aTgS4&list=PLvKbarVtwhUtfd0HpR9IUCGGgXQRInyyu ChrisFix Key Chains: http://chrisfixed.com/store.php Helmet I use: http://amzn.to/2cUBvow Tow Straps: http://amzn.to/2csmN1O Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to get your car ready for any motorsports from drifting to drag racing. I show you how to install a quick release fire extinguisher, how to install tow straps, how to build your own heat shield for the master cylinder, and what to look for when picking out a race helmet. Race Helmet: http://amzn.to/2cUBvow Fire extinguisher: http://amzn.to/2cUC7dV Quick release mount: http://amzn.to/2cUAVqS Seat Mounting Brackets: http://amzn.to/2cUCntc Tow Strap: http://amzn.to/2csmN1O Shift Knob: https://goo.gl/dmzFYz Panel Clip Pliers: http://amzn.to/2dhATob Ramps: http://amzn.to/2dg2M49 Aluminum Sheet: http://amzn.to/2dqBtQR Foil/Foam Insulation: http://amzn.to/2dqzagX Mustang Trailer Hitch: http://amzn.to/2d0u5fl Link to my oil test results: https://goo.gl/0oGkw0 If you want your own oil test kit: https://goo.gl/Q99LT7 Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn How to Solder Correctly. In this video I show you the tools, tips, tricks, and techniques to properly solder, from what type of solder and flux you should use to how to splice the wires together for a strong soldered joint. I show you how to strip the wires, add heat shrink, splice the wires, solder, and melt the heat shrink to make a perfect soldered connection! Tools: Solder: http://amzn.to/2cfjNcv Rosin Flux: http://amzn.to/2bVPzMB Soldering Gun: http://amzn.to/2c0cCoe Soldering Iron: http://amzn.to/2c0cRiX Wire Strippers: http://amzn.to/2cDPvyk Automatic Strippers: http://amzn.to/2c0cV27 Silicone Paste: http://amzn.to/2cEMikT Helping Hands: http://amzn.to/2bVQL2E Heat Shrink Kit: http://amzn.to/2cr3NmA Butane Torch Tip: http://amzn.to/2c1QPzg Heat Gun: http://amzn.to/2dvOn2g Project Night Light: https://www.youtube.com/watch?v=qp9L00SMSHQ&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb How to Build a Police Car: https://www.youtube.com/watch?v=lPW2F_NZj1w&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb How to Buy a used car: https://www.youtube.com/watch?v=vC8LbvYk6es&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Drift Car Build: https://www.youtube.com/watch?v=Pzj0neTS0pw&list=PLvKbarVtwhUtfd0HpR9IUCGGgXQRInyyu Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn How to wash your car properly. In this video I go over everything you need to know to Super Clean your car and make the paint go from old, dirty, and dull, to clean, glossy and bright! I cover touchless foam wash, touch wash, clay bar, drying, paint correction, and using sealer or wax. Here are all the products I used: Pressure Washer: http://amzn.to/2bt7GZN Foam Cannon: http://amzn.to/2brRODT Foam Gun (hose): http://amzn.to/2aTwFkr Grit Guard: http://amzn.to/2aTwEN6 Grit Wash Board: http://amzn.to/2bgSyj8 Sealant Wax: http://amzn.to/2aTwIMQ Clay Bar: http://amzn.to/2b54tPj Wash Mit: http://amzn.to/2brT2z1 Polish: http://amzn.to/2bt8nlO Car Soap (wont strip wax): http://amzn.to/2uYc5MJ Drying Towels: http://amzn.to/2aT8T8l Detailing Brush: http://amzn.to/2brSYiW 3000 grit sandpaper: http://amzn.to/2bdtdEP 5000 grit sandpaper: http://amzn.to/2b1HZes Soapy Wooder: Not Available ;) Top 10 Car Cleaning Mistakes: https://www.youtube.com/watch?v=ef_-SNSnByg&list=PLvKbarVtwhUs7sIm9Hc9VgANltYl8_DwC How to Super Clean your Windshield: https://www.youtube.com/watch?v=vJkfrY2owb0&list=PLvKbarVtwhUs7sIm9Hc9VgANltYl8_DwC How to Super Flush your Cooling System: https://www.youtube.com/watch?v=s--5ft5YiHg&list=PLDD611CFB36FC65F2 How to Remove Scratches: https://www.youtube.com/watch?v=2nYF46P7B2c&list=PLvKbarVtwhUs7sIm9Hc9VgANltYl8_DwC How to Clean Your Tires: https://www.youtube.com/watch?v=zDzIf4G8jkc&list=PLDD611CFB36FC65F2 Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

DIY odometer repair and LED dash light install. Learn how to fix your odometer to show the correct mileage when you drive. The odometer gear can easily be repaired by taking the gauges out from the dashboard, but I also show you how to replace the speed sensor. Since we are taking the dash apart, I show you how to install LED bulbs for your instrument cluster. LED Bulbs: http://amzn.to/2at9flA Odometer Gear: http://amzn.to/2agySdX Torx Sockets: http://amzn.to/2agzd0m Electric Drill: http://amzn.to/2aPdIFa Ramps I used: http://amzn.to/2akqENK Here are the LEDs at night: https://www.instagram.com/p/BIoTPG8jIuS Fix a Loose Column https://www.youtube.com/watch?v=LKqiDy_Po2M&list=PLDD611CFB36FC65F2 Fix a Squeaky Belt: https://www.youtube.com/watch?v=AEUe6uKxTv8&list=PLDD611CFB36FC65F2 How to Drift: Coming this Fall!!! Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Fuel Pump Test and Fuel Pump Replacement. I show you how to figure out if your fuel pump is bad and then how to replace a fuel pump in your car or truck. In this episode of the Drift Build I try to get the Mustang started! Where I got my Fuel Pump: http://goo.gl/xjBKd9 Fuel Filter: http://goo.gl/sfbFDa Fuel Line Quick Disconnect Tool: http://amzn.to/29QS5To Voltmeter: http://amzn.to/2ahAbui Fuel Pressure Tester: http://amzn.to/2aBszi4 Ramps I used: http://amzn.to/2agKFXM Fix Uneven Break Pad Wear: https://www.youtube.com/watch?v=Gdc3PZ0gFvA&list=PLDD611CFB36FC65F2 Metal Etch and Personalize Your Tools: https://www.youtube.com/watch?v=zGtDz_rGgs8&list=PLDD611CFB36FC65F2 300k Mile Fuel Filter Replacement: https://www.youtube.com/watch?v=92TfTQTmuq4&list=PLDD611CFB36FC65F2 Thank you AutoZone for supporting the #DriftStang and sending me a fuel pump! I was able to get the car on the road for drifting this summer! #HoodsUpAmerica AutoZone Rents Tools and Scans your Computer Free (just not in CA) http://www.autozone.com/inourstores/services.jsp Here is where you can find your local parts store: http://www.autozone.com/storelocator/storeLocatorMain.jsp Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by AutoZone and all opinions are mine. They were so helpful with the ChrisFix Car Meet and getting my car back on the road so thank you!

How to start a car. Don't just start a car that hasn't run in a while. In this video I show you what to check before you attempt to start a car that has not run for 6 months or more so you don't damage the engine. Portable Jump Starter: https://amzn.to/2E9Gawq Dry Lock Lubricant: http://amzn.to/29zX38f Clear Lock: http://amzn.to/29xrAh0 Fogging Oil: http://amzn.to/29xs9XS Spark Plug Gap Tool: http://amzn.to/29EYik3 Hand Pump: http://amzn.to/29u2RuX Coolant Tester: http://amzn.to/29xsKJr Where I won my car from: https://goo.gl/gQlqeE Where I sent my oil sample: http://goo.gl/Q99LT7 How to Replace a Fuel Pump: https://www.youtube.com/watch?v=mDIlwbx0B-s&list=PLvKbarVtwhUtfd0HpR9IUCGGgXQRInyyu How to Clean Your Engine Bay: COMING SOON Does an Air Intake Add Power?: COMING SOON Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by 3inOne and all opinions are truthfully my own.

How to buy a drift car for cheap! I stole this car!!! Instagram→ https://www.instagram.com/chrisfixit Next Episode: https://www.youtube.com/watch?v=1BiFpSkMbNQ&list=PLvKbarVtwhUtfd0HpR9IUCGGgXQRInyyu In the First Episode of the ChrisFix Drift Car Build, I show you what drift car I bought, how I got it, and also announce a big event at the end!!! How to Replace a Fuel Pump: https://www.youtube.com/watch?v=mDIlwbx0B-s&list=PLvKbarVtwhUtfd0HpR9IUCGGgXQRInyyu How to Clean Your Engine Bay: COMING SOON Does an Air Intake Add Power?: COMING SOON Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by AutoZone and all opinions are truthfully my own. Make sure you come out to the ChrisFix meet!!!

DIY Metal Etching. Learn how to add larger sized numbers to your sockets so you can actually see what size they are, and learn how to etch your name or logo into your tools using a battery! This is great for gifts or just to mark your tools! Tools/Products Used: Reusable Stencils: http://amzn.to/28ZGqh5 3-IN-ONE rust prevent: http://amzn.to/293Eo1M Alligator Clips: http://amzn.to/28Z1h83 ChrisFix Stickers (bigger than in the video): http://chrisfixed.com/store.php $10 Sockets: http://amzn.to/296rS1U Giant Crescent Wrench: http://amzn.to/28ZUt8x Car Battery Jumper: http://amzn.to/2922E5t Nail Polish (or "borrow" some): http://amzn.to/28ZoIts Cotton Swabs: http://amzn.to/29kUq9O Repair Scratched Wheels: https://www.youtube.com/watch?v=9WQiqYlpxoY&list=PLDD611CFB36FC65F2 Remove Scratches on Your Car's Paint: https://www.youtube.com/watch?v=2nYF46P7B2c&list=PLDD611CFB36FC65F2 Restore Hazy Headlights: https://www.youtube.com/watch?v=UEJbKLZ7RmM&list=PLDD611CFB36FC65F2 Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by 3-in-One as they sent me the oil to use in my videos.

What tools does ChrisFix use? What are good tools for beginners? How do you get free tools? How do you make money buying tools? All of these questions are answered in this video!!! New Red Tool Box (Loaded): http://amzn.to/2jGPXQk Breaker Bar: http://amzn.to/28X8m6M A good beginner socket set: http://amzn.to/28UCiRf A good beginner wrench set: http://amzn.to/28Wt72C Wireless OBD2 Scanner I use: http://amzn.to/1XNUGfz Jack I use: http://amzn.to/28Wtfzg Impact Gun: http://amzn.to/28Rj7cb How to Fix Wheels with Scratches and Curb Rash: https://www.youtube.com/watch?v=9WQiqYlpxoY&list=PLDD611CFB36FC65F2 How to Fix your Car's AC: https://www.youtube.com/watch?v=pCv7rCdcXsc&list=PLDD611CFB36FC65F2 What Work Gloves are the Best: https://www.youtube.com/watch?v=2jMPQh7DTs8&list=PLvKbarVtwhUt6f0lv4aoWQBS9eZl7tS9S Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Watch me turn this Ford Crown Victoria P71 into a police car for a local police officer. In this final episode of Project Police Interceptor, I use some subscriber suggestions, wire the lights up, and the officer takes me for a ride at night to test the lights and siren! Rubber Spray I used: http://amzn.to/1VVmmky Labeler: http://amzn.to/1U8yAqs Wire Stripper: http://amzn.to/1UMMw3w Soldering Gun: http://amzn.to/1ZJSqa2 Rocker Switches: http://amzn.to/1U3rput LED Light Bar: http://amzn.to/25T8BFH Dash Camera: http://amzn.to/1SjlUXM Episode 1: https://www.youtube.com/watch?v=lPW2F_NZj1w&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 2: https://www.youtube.com/watch?v=V_mXR_Kol4Q&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 3: https://www.youtube.com/watch?v=gIZZwcKqSkI&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 4: https://www.youtube.com/watch?v=p73MsP4VSUU&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 5: https://www.youtube.com/watch?v=1-F0PIF8Hqo&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to remove paint scuffs from your car. Learn how to safely remove paint transfer from your car's paintwork without causing any damage to the paint underneath. Foam Abrasive: http://amzn.to/1r4wgDj Dash Camera I use: http://amzn.to/22BezJu WD40: http://amzn.to/1X1Expk Clay Bar: http://amzn.to/1XUcwiN Wax I recommend: http://amzn.to/1XUdviU Compound: http://amzn.to/1TYJpIw Remove Scratches from Wheels: https://www.youtube.com/watch?v=9WQiqYlpxoY&list=PLDD611CFB36FC65F2 Top 10 Car Cleaning Mistakes: https://www.youtube.com/watch?v=ef_-SNSnByg&list=PLDD611CFB36FC65F2 Remove Scratches From your Car's Paint: https://www.youtube.com/watch?v=2nYF46P7B2c&list=PLDD611CFB36FC65F2 Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by WD40 and all opinions are mine. It was a perfect fit since wd40 is great at softening paint transfer but not too strong to damage your car's clear coat!

Restore Damaged Wheels! How to repair rims with deep scratches and curb rash. This wheel repair works on your aluminum alloy and steel rims no matter how deep the scratch or how bad the curb rash! Submit Your Photos: https://www.instagram.com/chrisfixit Products I used: Metal Reinforced Bondo: http://amzn.to/27UPs88 ChrisFix Soapy Wooder: Priceless! Rubbing Alcohol: http://amzn.to/1TMujqT 80 grit Sandpaper: http://amzn.to/1WZ1lXB 320 grit Sandpaper: http://amzn.to/1Vl4BL1 600 grit Sandpaper: http://amzn.to/1sByYBe Spot Putty: http://amzn.to/27UPtcs Primer Filler: http://amzn.to/1Vl5qUb Silver Metallic Spray Paint: http://amzn.to/27UPBsf Wheel Clear Coat: http://amzn.to/1Vl4PC2 How to Repair Aluminum Rims: https://www.youtube.com/watch?v=8W9jn90VEAY&list=PLvKbarVtwhUsbEnGIMzYholzTozXBqYkk How to Paint Wheels: https://www.youtube.com/watch?v=u-TNsO33eqQ&list=PLvKbarVtwhUsbEnGIMzYholzTozXBqYkk How to Remove Scratches: https://www.youtube.com/watch?v=2nYF46P7B2c&list=PLDD611CFB36FC65F2 Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 3M's Facebook → https://www.facebook.com/3Mautousa Website → http://www.ChrisFixed.com 3M's Page for more info → http://3mauto.com/ My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by 3M. I use 3M products for my projects so this was a perfect fit for a wheel repair video!

Hood Release Stuck? How do you open a stuck hood? If the hood of your car is not opening or the hood cable is going bad, this video is for you! I show you how to open a hood with a broken cable and how to replace the hood cable with some helpful tips and tricks to make the job easy! Panel Clip Pliers: http://amzn.to/1OEQ85Q Pry Bar: http://amzn.to/1TwsTAu Ramps: http://amzn.to/1NCZKDj How to Restore Junkyard Wheels: https://www.youtube.com/watch?v=9WQiqYlpxoY&list=PLDD611CFB36FC65F2 How to Fix Your AC System: https://www.youtube.com/watch?v=pCv7rCdcXsc&list=PLDD611CFB36FC65F2 How to Fix Parking Sensors: https://www.youtube.com/watch?v=8ECB-Nyx2bo Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Front Strut Replacement. Learn how to replace front or rear struts in your car. In this case I am working on a Mazda 3 but replacing struts is the same or very similar for most vehicles so after watching this video you will be able to replace the struts in your vehicle. Monroe Quick-Struts I use: http://amzn.to/1WsRvNq Penetrating Fluid I used: http://amzn.to/1Ntet3J Breaker Bar: http://amzn.to/221MI4M Thread Locker: http://amzn.to/1WsRKbf Torque Wrench: http://amzn.to/1VWMJqU How to Replace Front Shocks: https://www.youtube.com/watch?v=E6dEXhEGoU8&list=PLvKbarVtwhUvKNI4eMqlob1biOtaIs8NF How to Replace Rear Shocks: https://www.youtube.com/watch?v=dqDiMSxnIGo&list=PLvKbarVtwhUvKNI4eMqlob1biOtaIs8NF What Abuse Does Your Suspension Take Every Day?: https://www.youtube.com/watch?v=MEZSB1JglDM&list=PLvKbarVtwhUvKNI4eMqlob1biOtaIs8NF Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by Monroe Shocks & Struts and features the Monroe Quick-Strut® complete replacement strut assembly. This is a perfect fit because I use Monroe shocks and struts in all my vehicles (as you have seen in the past). This video was also supported by 3-in-One as they sent me the penetrating fluid to use in the video.

How to inspect and buy a used car. Learn how to go for a test drive so you don't get stuck with a bad car. I show you how to test drive a used car, negotiate a good deal and inspect the title of the used car. Episode 1: The "Side of the Road Inspection": https://www.youtube.com/watch?v=vC8LbvYk6es&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 2: What is the car worth?: https://www.youtube.com/watch?v=9N4RpohW-hU&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 3 Engine Inspection: https://www.youtube.com/watch?v=HDv5bUR_Plo&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 4: Interior & Exterior Inspection: https://www.youtube.com/watch?v=sSi8xuRm5eE&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Link to the FREE downloadable ChrisFix Used Car Inspection Checklist: https://goo.gl/uqaWYa Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to inspect a used car before buying. Learn all of the tips and tricks on inspecting the interior and exterior of a used car before you buy it so you don't get stuck with a bad car. I show you how to check for odometer rollbacks, a bad heater core, body work, collision damage, and much more! Episode 1: The "Side of the Road Inspection": https://www.youtube.com/watch?v=vC8LbvYk6es&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 2: What is the car worth?: https://www.youtube.com/watch?v=9N4RpohW-hU&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 3 Engine Inspection: https://www.youtube.com/watch?v=HDv5bUR_Plo&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 5: Test Drive and Negotiation: https://www.youtube.com/watch?v=drbhNLvYxGQ&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Link to the FREE downloadable ChrisFix Used Car Inspection Checklist: https://goo.gl/uqaWYa Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to inspect the engine of a used car so you don't get stuck with a bad car. I show you how to check for head gasket leaks, check the fluids, see if the car was in a front end collision, and much more! Wireless OBD2 Scanner I use: http://amzn.to/1XNUGfz Episode 1: The "Side of the Road Inspection": https://www.youtube.com/watch?v=vC8LbvYk6es&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 2: What is the car worth?: https://www.youtube.com/watch?v=9N4RpohW-hU&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 4: Interior & Exterior Inspection: https://www.youtube.com/watch?v=sSi8xuRm5eE&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 5: Test Drive and Negotiation: https://www.youtube.com/watch?v=drbhNLvYxGQ&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Link to the FREE downloadable ChrisFix Used Car Inspection Checklist: https://goo.gl/uqaWYa Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to call the owner of a used car, figure out what the car is worth, run a free VIN number check, and many other tips and tricks. If you see a used car for sale on the side of the road and want to know if it is worth going for a test drive, I go though all of the things you want to do before you go on the test drive. This way you wont waste your time and so you don't get ripped off! Episode 1: The "Side of the Road Inspection": https://www.youtube.com/watch?v=vC8LbvYk6es&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 3 Engine Inspection: https://www.youtube.com/watch?v=HDv5bUR_Plo&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 4: Interior & Exterior Inspection: https://www.youtube.com/watch?v=sSi8xuRm5eE&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 5: Test Drive and Negotiation: https://www.youtube.com/watch?v=drbhNLvYxGQ&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Link to the FREE downloadable ChrisFix Used Car Inspection Checklist: https://goo.gl/uqaWYa OBD2 Scanner I use: http://amzn.to/1XNUGfz Free VIN Check (stolen car and salvage): https://www.nicb.org/theft_and_fraud_awareness/vincheck Free VIN Check (recalls): https://vinrcl.safercar.gov/vin/ KBB Trade in Value Calculator: http://www.kbb.com/whats-my-car-worth/ NADA Trade in Value Calculator: http://www.nadaguides.com/Cars Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Changing your automatic transmission fluid can leave you with many questions like: how do you check your transmission fluid, when should you change transmission fluid, how often should you change it, should you do a fluid flush, and what about sealed transmissions? I cover these questions and many more so you can get your transmission questions answered. Plus I put the myths to rest once and for all! Ramps I used: http://amzn.to/1RLY2yU Best Transmission Fluid Prices: http://amzn.to/1Nf3R2K How to Change Transmission Fluid: https://www.youtube.com/watch?v=yb_1wbiPz9g&list=PLDD611CFB36FC65F2 How to Change Differential Fluid: https://www.youtube.com/watch?v=KmqMUJb-E4M&list=PLDD611CFB36FC65F2 How to Recharge your Air Conditioning: https://www.youtube.com/watch?v=Pdq8JAlct6s&list=PLDD611CFB36FC65F2 Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Make sure you share this with your friends so they don't get ripped off! Learn how to change out the Blinker Fluid in your car or truck with my easy to follow how-to video! Subscribe→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Blinker Fluid: https://goo.gl/kv6f87 Where I get my Muffler Bearings: https://goo.gl/L152MH Elbow Grease: http://amzn.to/1Y2oBjJ LED Turn Signals: http://amzn.to/1Y2wohC How to Replace Muffler Bearings: https://www.youtube.com/watch?v=eWdqlpxRA4I How to Replace Piston Return Springs: https://www.youtube.com/watch?v=oFX_Xq9WHTI How to Make Snake Oil: Stay Tuned (April 1st 2019) THIS VIDEO IS A PARODY. IT IS A JOKE! THERE IS NO SUCH THING AS BLINKER FLUID OR ELBOW GREASE!!! HAPPY APRIL FOOLS DAY!!! Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Automatic Transmission Fluid Change. This is the complete guide on how to change the transmission fluid in your car or truck! I give you valuable tips like tightening the bolts on the transmission valve body gasket so you get crisper shifts or using silicone on the rubber gasket to hold it in place. Transmission Filter: http://amzn.to/1ZuJQvT Transmission Fluid: http://amzn.to/1VH4mtd Funnel: http://amzn.to/1VH3Ziz Silicon Paste: http://amzn.to/1LImgts Abrasive Pad: http://amzn.to/1pJc0HN Low-torque Toque wrench: http://amzn.to/22AI3Lj Ramps I use: http://amzn.to/1UhWkrr Cris-cross Tightening Sequence: http://goo.gl/G9Wrk9 How to Change Your Engine Oil: https://www.youtube.com/watch?v=O1hF25Cowv8&list=PLvKbarVtwhUvKCEzK79P2ex9rWVRxVcTl Can Changing your Transmission Fluid Damage your Transmission?: https://www.youtube.com/watch?v=o690DovjDAc&list=PLvKbarVtwhUvKCEzK79P2ex9rWVRxVcTl How to Change your Differential Fluid: https://www.youtube.com/watch?v=KmqMUJb-E4M&list=PLvKbarVtwhUvKCEzK79P2ex9rWVRxVcTl Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video has been compensated by Collective Bias, Inc. All opinions are mine alone.

Fix scratches on car. Learn how to remove car scratches at home with these 5 easy steps and no special tools! After watching this video you will know how to identify and repair clear coat scratches from your car's paint so it looks new again! Soapy Wooder: https://goo.gl/HCpxjx 3000 Grit Sandpaper: http://amzn.to/1TQJFff 5000 Grit Sandpaper: http://amzn.to/1TQJHUg Polish: http://amzn.to/1QIH8zJ Wax: http://amzn.to/1SEB2mj Microfiber Towel: http://amzn.to/1TQK01h Tape: http://amzn.to/1SEBgtL Top 10 Car Cleaning Mistakes: https://www.youtube.com/watch?v=ef_-SNSnByg&list=PLvKbarVtwhUs7sIm9Hc9VgANltYl8_DwC How to Remove Paint Transfer: https://www.youtube.com/watch?v=7zzq5f8x5f4&list=PLDD611CFB36FC65F2 How to Restore Headlights PERMANENTLY: https://www.youtube.com/watch?v=UEJbKLZ7RmM&list=PLvKbarVtwhUsmuFsj9IGHAXX5c_dMrw2J Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Part 2: Learn how to build your own custom center console for your car or truck. In this episode I show you how to cover the console in foam and material as well as install the switches. Here is Episode 1: https://www.youtube.com/watch?v=p73MsP4VSUU Final Episode of Project Police Interceptor: https://www.youtube.com/watch?v=1-F0PIF8Hqo&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Supplies: Spray Adhesive: http://amzn.to/1R296n4 1in Thick Foam: http://amzn.to/1PwZGlD Black Canvas Fabric: http://amzn.to/1PwZOlm Rocker Switch Mount: http://amzn.to/243AFpL Red Rocker Switches: http://amzn.to/1KP0bsD 3 in 1 Cig charger, voltmeter, USB : http://amzn.to/1KP0raM Black ABS Plastic: http://amzn.to/1Px1drX Hole Saw Kit: http://amzn.to/1VeuFEH Oscillating Cutting Tool: http://amzn.to/1KOZZJP Green Tape: http://amzn.to/1od2paK Staple Gun: http://amzn.to/1PwZUJK Episode 1: https://www.youtube.com/watch?v=lPW2F_NZj1w&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 2: https://www.youtube.com/watch?v=V_mXR_Kol4Q&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 3: https://www.youtube.com/watch?v=gIZZwcKqSkI&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 4: https://www.youtube.com/watch?v=p73MsP4VSUU&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 5: https://www.youtube.com/watch?v=1-F0PIF8Hqo&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

You choose the next ChrisFix project car that will be used in the upcoming build series! Voting is over and here is what I picked!!! https://www.youtube.com/watch?v=_ryGH_aTgS4&list=PLvKbarVtwhUtfd0HpR9IUCGGgXQRInyyu Thanks a lot to the guests who gave some drift car ideas: Engineering Explained - https://www.youtube.com/engineeringexplained Busted Knuckle Films-http://www.youtube.com/bustedknucklevideo SubaruWRXfan- https://www.youtube.com/subaruwrxfan I want to hear your ideas so comment below! The car has to be rear wheel drive and around $4000 or less. Some drift car ideas include, Mazda Miata, Mazda RX8 or RX7, Chevy Corvette, Ford Mustang, a pickup truck, Chevy El Camino, Nissan 350z, Nissan 240, Datsun Z, Chrysler Crossfire, Chevy Camaro, etc... Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to build your own custom center console for your car or truck, in Episode 4 of Project Police Interceptor. Just like in my pickup truck, this Ford Crown Victoria did not come with a center console so I am going to build a custom console that has a storage compartment, arm rest, rocker switches for any accessories you want to run. I am also going to put a USB charging port so you can charge your cell phone. The best part about this build is that once you learn how to build a center console, you can design yours any way you want, and you are only limited by your imagination! The Next Episode: https://www.youtube.com/watch?v=A_Z9rP5M_jM&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Supplies: 1in Thick Foam: http://amzn.to/1PwZGlD Black Canvas Fabric: http://amzn.to/1PwZOlm Rocker Switch Mount: http://amzn.to/243AFpL Red Rocker Switches: http://amzn.to/1KP0bsD 3 in 1 Cig charger, voltmeter, USB : http://amzn.to/1KP0raM Black ABS Plastic: http://amzn.to/1Px1drX Hole Saw Kit: http://amzn.to/1VeuFEH Oscillating Cutting Tool: http://amzn.to/1KOZZJP Green Tape: http://amzn.to/1od2paK Staple Gun: http://amzn.to/1PwZUJK Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to Defog your Car Windows, Learn how to defog your windows. I test home remedies that you guys told me to try out in my last car window defogging video. I test a bar of soap, mouthwash, spit, toothpaste, an avocado, and an onion. Which ones will work to prevent fog and which ones won't, we shall find out?!?! Mini-Microscope Camera: http://www.amazon.com/gp/product/B00P8D96N6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00P8D96N6&linkCode=as2&tag=chri0e2-20&linkId=JU3BXSYZ4EIIUAX3 RainX Defogger: http://www.amazon.com/gp/product/B0009H5W5W/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0009H5W5W&linkCode=as2&tag=chri0e2-20&linkId=UXUYLG3YEAJIWE4P How to Stop Car Windows from Steaming Up: https://www.youtube.com/watch?v=8Vj9avZxuwI&list=PLDD611CFB36FC65F2 Using Toothpaste to Restore your Headlights: https://www.youtube.com/watch?v=rXHTXdlWw1w&list=PLDD611CFB36FC65F2 Which Product is BEST to Remove Sap: https://www.youtube.com/watch?v=4lHnT7cSgRU&list=PLDD611CFB36FC65F2 How to SUPER Clean the Inside Windshield: https://www.youtube.com/watch?v=axI5Luw0Eos&list=PLDD611CFB36FC65F2 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

TPMS, A tire pressure monitoring system lets you know if a tire is leaking air or if it is flat and creating dangerous driving conditions. Since older cars dont have TPMS and it is a really nice feature to have. In this video I show you how to install an inexpensive TPMS for your car or truck. Tire Pressure Monitoring System Kit: http://amzn.to/2DurTt9 Hand Held Tire Pressure Gauge: http://amzn.to/2BwQlga Cigarette Lighter Power Splitter: http://amzn.to/2zdRO4G How to Reset a Tire Pressure Warning Light: https://www.youtube.com/watch?v=VrpC4tZ8bZI **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to inspect a used car for purchase. I show you everything you need to know on how to inspect a used car for the first time when the owner is not around to give you a test drive. If you see a used car for sale on the side of the road and want to know if it is worth contacting the owner for a test drive, I go though all of the things you want to inspect. This way you wont waste your time if the car is no good. Link to the downloadable ChrisFix Used Car Inspection Checklist: https://goo.gl/uqaWYa Episode 1: The "Side of the Road Inspection": https://www.youtube.com/watch?v=vC8LbvYk6es&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 2: What is the car worth?: https://www.youtube.com/watch?v=9N4RpohW-hU&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 3 Engine Inspection: https://www.youtube.com/watch?v=HDv5bUR_Plo&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 4: Interior & Exterior Inspection: https://www.youtube.com/watch?v=sSi8xuRm5eE&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 5: Test Drive and Negotiation: https://www.youtube.com/watch?v=drbhNLvYxGQ&list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to replace a fuel filter on a Toyota, Chevy Silverado, Pontiac, GMC, Cadillac, Buick, Honda Civic, Honda Accord and more. Learn how to replace a fuel filter that is connected to the fuel lines with flare nuts. Changing your fuel filter will prevent loss of power, loss of fuel economy, and debris from clogging expensive fuel injectors. Flare nut wrenches: http://www.amazon.com/gp/product/B00KF253OG/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00KF253OG&linkCode=as2&tag=chri0e2-20&linkId=PPQUG4K3GIHYU7H3 Antiseize I use: http://www.amazon.com/gp/product/B000AAJTXY/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000AAJTXY&linkCode=as2&tag=chri0e2-20&linkId=TJHV7BANP4NVHPEE Inexpensive Fuel Filters: http://www.amazon.com/s/ref=as_li_ss_tl?_encoding=UTF8&camp=1789&creative=390957&field-keywords=fuel%20filter&linkCode=ur2&tag=chri0e2-20&url=search-alias%3Daps&linkId=KX5M5QRPFKEWXJ32 Lightweight 2 Piece Ramps: http://www.amazon.com/gp/product/B003ZAGI9E/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B003ZAGI9E&linkCode=as2&tag=chri0e2-20&linkId=XTMDEOMZRX3TKTCB How to Test Fuel Pressure: https://www.youtube.com/watch?v=_oXLUqE4Sf0 Ford Fuel Filter Change: https://www.youtube.com/watch?v=uQbYs_6jrno 300,000 Mile Fuel Filter Cut Open: https://www.youtube.com/watch?v=92TfTQTmuq4 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to paint your wheels on your car properly so it looks amazing and lasts a long time! I go though the 5 main steps to paint your rims any color you want. How to Repair Wheels with Body Filler: https://www.youtube.com/watch?v=9WQiqYlpxoY&list=PLvKbarVtwhUsbEnGIMzYholzTozXBqYkk Center Caps: http://bit.ly/CenterCaps Primer: http://amzn.to/27USzNv Black Paint: http://amzn.to/1Z5cWBG Angle Grinder: http://amzn.to/1WoJOYd Wire wheel: http://amzn.to/1TDYfSo Tire Shine Gel: http://amzn.to/1WoJ8lJ How to Repair Curb Rash and Scratches on Wheels: https://www.youtube.com/watch?v=8W9jn90VEAY&list=PLvKbarVtwhUsbEnGIMzYholzTozXBqYkk How to Paint Brake Calipers: https://www.youtube.com/watch?v=AmEEYTtIfMU **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

In this episode of Project Police Interceptor, we install front and rear police lights as well as a light bar into the cruiser. Watch as I turn this beat up 2005 Ford Crown Victoria P71 into a police car for a police officer. ***This car is for a police officer who can legally use it. You cannot use red/blue lights or police sirens legally if you are not a cop. I have had numerous questions about this so I want to make it clear THIS CAR IS FOR A POLICE OFFICER.*** Panel Clip Pliers I use: http://amzn.to/1XNaByo Light Bar: http://amzn.to/25T8BFH Great Dash Camera: http://amzn.to/1SjlUXM Cordless Drill I use: http://amzn.to/1XNbEOM Episode 1: https://www.youtube.com/watch?v=lPW2F_NZj1w&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 2: https://www.youtube.com/watch?v=V_mXR_Kol4Q&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 3: https://www.youtube.com/watch?v=gIZZwcKqSkI&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 4: https://www.youtube.com/watch?v=p73MsP4VSUU&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 5: https://www.youtube.com/watch?v=1-F0PIF8Hqo&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Finding that right gift for Christmas could be difficult but my ChrisFix Top 5 Christmas Gift Ideas for Motorheads, Petrolheads, and Car Guys or Gals should help you get 5 solid ideas! ChrisFix Gear: http://bit.ly/ChrisFixSwag Dash Camera: http://amzn.to/2bEhO0L Portable Jump Starter: http://amzn.to/2bTIXxc Stanley Tool Set: http://amzn.to/2bSaWdE Bluetooth OBD2 Scanner: http://amzn.to/1XNUGfz Other Christmas Gift Idea videos I did the next year 2nd year: https://www.youtube.com/watch?v=3-PZ4gE5o14 3rd year: https://www.youtube.com/watch?v=EOeOZPiF8qY Stocking stuffers (things that are good but didnt make the list): A torque Wrench: http://amzn.to/2csa0lD Rapid Pump Floor Jack: http://amzn.to/2cs9GTZ **Due to bad customer service and getting taken advantage of (still waiting for my order of tools to get delivered and they never will so I am out a decent amount of money), I do not link to Sonic tools anymore. Thanks for the support guys! BlueDriver Review Video: https://www.youtube.com/watch?v=xPI36bKVCjk Thank you to all of my subscribers for the amazing support! Merry Christmas, Happy Hanukkah, and Happy Holidays to all! **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

In this ChrisFix Tool Review I put Ironclad Gloves to the test! We roast them with a torch, dunk them in ice cold water, and vibrate them silly to see if they can handle the heat. The gloves I recommend for DIYers: http://www.amazon.com/gp/product/B012AR483A/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B012AR483A&linkCode=as2&tag=chri0e2-20&linkId=GB3RJ7OZOPI4QN3M Heat/Welding Gloves: http://www.amazon.com/gp/product/B004CFBAOY/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004CFBAOY&linkCode=as2&tag=chri0e2-20&linkId=XMKZIKFD56IAJZ2O Perfect Snow Gloves: http://www.amazon.com/gp/product/B00M7S2WIQ/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00M7S2WIQ&linkCode=as2&tag=chri0e2-20&linkId=3WL6YJGDZJ7X5STY Touch Screen Gloves: http://www.amazon.com/gp/product/B00DCBC30E/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00DCBC30E&linkCode=as2&tag=chri0e2-20&linkId=A3CNPTPFBPDLOM44 Vibration/Impact Gloves: http://www.amazon.com/gp/product/B00DF29PMY/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00DF29PMY&linkCode=as2&tag=chri0e2-20&linkId=NUZEA2KBP4KPKAPR All of the other gloves: http://www.amazon.com/s/ref=as_li_ss_tl?_encoding=UTF8&camp=1789&creative=390957&field-keywords=ironclad%20gloves&linkCode=ur2&tag=chri0e2-20&url=search-alias%3Daps&linkId=4U64VKQLSFUKYX2L BlueDriver Review: https://www.youtube.com/watch?v=xPI36bKVCjk Go2 Socket Review: https://www.youtube.com/watch?v=Fr1A-vd8xoI **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

In this video I test Royal Purple Max Clean Fuel System Cleaner in a Ford Explorer. I use a borescope camera to look into the engine and see how dirty the engine is before the fuel treatment and then after the fuel treatment. This is the first time I looked at intake runners and valves, and I also looked at the piston head. I followed the instructions on the container and Royal Purple did clean some carbon off the intake runners, valves, and piston heads. This is the best in fuel system cleaner I have used that goes in the gas (so far) Here is the fuel cleaner I used: http://www.amazon.com/gp/product/B00B1VBQRS/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00B1VBQRS&linkCode=as2&tag=chri0e2-20&linkId=FQMBFE4BPRUPHOAU Here is the borescope camera I used: http://www.amazon.com/gp/product/B0158DJ20W/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0158DJ20W&linkCode=as2&tag=chri0e2-20&linkId=L3L2W3MXO6RFYLDF Seafoam in Car: https://www.youtube.com/watch?v=u6UeJXkzDW8 Seafoam in a Lawn Mower https://www.youtube.com/watch?v=WdT4DPFXIkM Here is the Techron Test: https://www.youtube.com/watch?v=h8i9qftqKNY Gumout "all in one" fuel system cleaner test: https://www.youtube.com/watch?v=5SoZnymBSC8 Lucas Fuel System Cleaner test: https://www.youtube.com/watch?v=FLhXqgEEYyI CleanBoost Maxx Test: https://www.youtube.com/watch?v=VDUogAQzLAc **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Here is a good reason to change your fuel filter. After 300,000 miles on the same fuel filter, I cut it in half so we can see how dirty the filter is and so we can do a flow test! I also check a fuel filter with 130k miles and another with 30k miles to compare the three fuel filters. Inexpensive Fuel Filters: http://amzn.to/1TcXVNN Quick Disconnect tool: http://amzn.to/23Q9UCj Ramps I use: http://amzn.to/1TcXZgw How to Change a Fuel Filter: https://www.youtube.com/watch?v=sDtQKNTz0QY What does a 300,000 mile Oil Change look like?: https://www.youtube.com/watch?v=oIG_BdsffcU **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Tree sap removal from car. What is the best product to quickly and easily remove tree sap from your car? In this video I test 12 different products and find one clear winner! Best Sap Remover: http://amzn.to/1lmXUt8 Commercial Sap Remover: http://amzn.to/1lmXRxp Microfiber Towels: http://amzn.to/1WWW8KM Defog your windows product test: https://www.youtube.com/watch?v=8Vj9avZxuwI Top 10 Car Cleaning Mistakes: https://www.youtube.com/watch?v=ef_-SNSnByg Can a fuel additive increase HP? https://www.youtube.com/watch?v=VDUogAQzLAc **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Project Police Interceptor is back!!! We have Episode 3 coming up where I wire the lights to light the car up like a Christmas tree, Episode 4 where we bullet proof the cruiser's doors, and maybe even an awesome bonus episode! -Instagram: https://instagram.com/chrisfixit -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed Episode 1: https://www.youtube.com/watch?v=lPW2F_NZj1w&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 2: https://www.youtube.com/watch?v=V_mXR_Kol4Q&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 3: https://www.youtube.com/watch?v=gIZZwcKqSkI&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 4: https://www.youtube.com/watch?v=p73MsP4VSUU&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 5: https://www.youtube.com/watch?v=1-F0PIF8Hqo&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Project Night Light: https://www.youtube.com/watch?v=b8GY69Ci7l4 Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace a Ford quick disconnect style fuel filter using a home-made quick disconnect tool made from a pen cap or using a store bought quick disconnect tool. This method will work on any Ford vehicles with a quick disconnect fuel filter. The vehicle I used is my 2001 Mazda Pickup (Ford Ranger). Inexpensive quick disconnect tool: http://amzn.to/1M0sRJV Inexpensive Fuel Filter: http://amzn.to/1XnysRZ Mechanic pick set: http://amzn.to/1PEUsq2 Fuel Pressure Test: https://www.youtube.com/watch?v=_oXLUqE4Sf0 GM Fuel Filter Replacement: COMING SOON 300,000mi Fuel Filter Analysis: https://www.youtube.com/watch?v=92TfTQTmuq4 How to Replace a normal fuel filter: https://www.youtube.com/watch?v=sDtQKNTz0QY **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to Change your Fuel Filter. Learn how to replace a fuel filter in your car. Also learn when you should replace your fuel filters and the symptoms of a clogged fuel filter. In this video I change the fuel filter in a Nissan but the process applies to many other makes and models. Inexpensive Fuel Filter: http://amzn.to/1XnysRZ Mechanic pick set: http://amzn.to/1PEUsq2 How to Replace a Ford Fuel Filter: https://www.youtube.com/watch?v=uQbYs_6jrno How to Replace a GM Fuel Filter: https://www.youtube.com/watch?v=o7Skqc5nVKY 300,000mi Fuel Filter Change: https://www.youtube.com/watch?v=92TfTQTmuq4 How to Test your Fuel Pressure: https://www.youtube.com/watch?v=_oXLUqE4Sf0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

After you fix your car, don't just throw those old car parts away, save them and get money for them fast and easy. I show you how to make some extra cash from what would otherwise be garbage. Here are some Metal Prices/100lbs which is pretty neat: Iron: $4 Aluminum: $40 Copper: $200 Brass: $140 Lead: $35 Car Radiators: $125 Batteries: $25 Work Gloves I used: http://amzn.to/1ZGHZWe How to Replace Brake Pads and Rotors: https://www.youtube.com/watch?v=lU6OKQxSg8U How to Make a Chef's Knife: https://www.youtube.com/watch?v=FqAFHPeGq2c **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to repair your rim and remove curb rash and scratches with this simple, step by step video. Scraping your rim against the curb is no fun, and the damage can cost a lot to fix until now! How to Paint Wheels on your Car: https://www.youtube.com/watch?v=u-TNsO33eqQ How to Repair Wheels with Body Filler: https://www.youtube.com/watch?v=9WQiqYlpxoY&list=PLvKbarVtwhUsbEnGIMzYholzTozXBqYkk Tools I used: Dremel: http://amzn.to/1JXwlL3 Flap Wheel: http://amzn.to/1WRwh91 Rim Polisher: http://amzn.to/1JXw8aR Clear Coat (made for aluminum): http://amzn.to/1Gn5jSk Quality Sand Paper (1000-2000 grit): http://amzn.to/1P3JEBA Quality Sand Paper (400-600 grit): http://amzn.to/1Ml2Mct Paint Stripper: http://amzn.to/1QPippL Tire Shine that Lasts a Year: https://www.youtube.com/watch?v=zDzIf4G8jkc How to Restore Headlights Permanently: https://www.youtube.com/watch?v=UEJbKLZ7RmM How to Fix a Cracked Bumper: https://www.youtube.com/watch?v=M6hlVoX0B_k **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to make a screwdriver float in mid air. This also works with other tools and a roll of tape. I use an air compressor and Bernoulli's Principal to make it happen! This video is a little different than normal but way cool! Just like a "party trick", entertain your friends when you are together in the shop or in the garage Watch I was wearing: https://amzn.to/2wOHVyu The air nozzle I used: http://amzn.to/1QNUybW Top 10 Car Cleaning Mistakes: https://www.youtube.com/watch?v=ef_-SNSnByg Clean a Headlight with Toothpaste: https://www.youtube.com/watch?v=rXHTXdlWw1w **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Need new brake pads and rotors? Watch this video on my Top 10 Brake Replacement Tips before you change your brake because I cover a few tips that many people overlook! Brake Cleaner: http://www.amazon.com/gp/product/B0002FU44K/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0002FU44K&linkCode=as2&tag=chri0e2-20&linkId=3NFSRHBUOBLQ57U7 Wire Brush Set: http://www.amazon.com/gp/product/B0037UUZRS/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0037UUZRS&linkCode=as2&tag=chri0e2-20&linkId=GB42V7CXRFKR4OMF Brake Compressor Tool: http://www.amazon.com/gp/product/B007N3I4QY/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B007N3I4QY&linkCode=as2&tag=chri0e2-20&linkId=5JOZCCRMSQY3CQUR Here is the Silicone Paste I used: http://www.amazon.com/gp/product/B005RNEH5O/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B005RNEH5O&linkCode=as2&tag=chri0e2-20&linkId=LGQ5CIGWERTJ6KSH Antiseize I use: http://www.amazon.com/gp/product/B00HSCN9IS/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00HSCN9IS&linkCode=as2&tag=chri0e2-20&linkId=RGIAKXUE4JFX3O4V How to Replace Brake Pads (the Complete Guide): https://www.youtube.com/watch?v=lU6OKQxSg8U How to Prevent Uneven Brake Wear: https://www.youtube.com/watch?v=Gdc3PZ0gFvA One Man Brake Bleeder: https://www.youtube.com/watch?v=1wwq1Vlk4Wg How to Replace Drum Brakes: https://www.youtube.com/watch?v=zJ_UXP6GWkw How to Bleed Brakes: https://www.youtube.com/watch?v=n1NvtUwfRJc **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. Copyright 2015 ChrisFix All rights reserved.

Torque wrench torque specs. Learn to properly use and maintain a torque wrench. Using a torque wrench on nuts and bolts is important to make sure the bolt is tightened to the correct tightness or torque. In this video I show how to use a torque wrench, give a few torque wrench top tips, also go over many questions people have about torque wrenches. Here is the torque wrench I use: http://amzn.to/1UYstzW How to Check Torque Wrench Calibration: COMING SOON!!! How to Use a Torque Wrench (My Old Video): https://www.youtube.com/watch?v=5XzKvEnk1FY OBDII Scanner Review: https://www.youtube.com/watch?v=xPI36bKVCjk **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. Copyright 2015 ChrisFix All rights reserved.

Recharge your AC system properly. I go though all of the steps on how to safely charge your air conditioning system with refrigerant. First you need to evacuate the system, then pull a vacuum, and then add the correct amount of refrigerant based on weight. Vacuum Pump + Manifold gauge combo: http://amzn.to/2rNhvue Manifold gauge set: http://amzn.to/29fZqu1 AC vacuum pump http://amzn.to/29nr6xS Refrigerant (with no oil or sealers): http://amzn.to/1WMjvuS Refrigerant Can Tap: http://amzn.to/20vQFxc Scale to weigh Refrigerant: http://amzn.to/1TrEQbs How to Find AC System Leaks: https://www.youtube.com/watch?v=pCv7rCdcXsc&list=PLDD611CFB36FC65F2 How to Replace an AC Compressor: https://www.youtube.com/watch?v=rulXlnG2Unk&list=PLDD611CFB36FC65F2 How to Quick Charge your AC System: https://www.youtube.com/watch?v=SHg2xRMnM38 Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn to Clean the Inside of Your Windshield. I show you the 3 step method to clean the inside of your windshield so there is no streaking and it removes the oily film. This is the easiest and fastest method to get a truly streak free windshield. How to Super Clean Your Windshield: https://www.youtube.com/watch?v=vJkfrY2owb0 How to Defog Your Glass: https://www.youtube.com/watch?v=8-IwmwzaHD0 Top 10 Car Cleaning Mistakes: https://www.youtube.com/watch?v=ef_-SNSnByg Microfiber Towels: http://amzn.to/1PxfXXS Magic Eraser: http://amzn.to/1Pxfrcy Glass Cleaner: http://amzn.to/243IMmv Dash Cleaner: http://amzn.to/2aFJ7rY Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Can you get better fuel economy with a fuel additive? In this video, we make YouTube History by testing a fuel additive to see if it will actually give you better fuel economy. I sent out 20 bottles of the fuel additive to my subscribers to test their fuel economy. They went a total of 56,000 miles and the results are in! Here is the product I used: http://goo.gl/V16Hu3 The test was proven to be statistically significant using a T-test by subscriber SX L after dopping the volvo outlier which means we got an average of .54mpg increase. Can a Fuel Additive Give you More HP: https://www.youtube.com/watch?v=VDUogAQzLAc Does Seafoam Actually Work in a car: https://www.youtube.com/watch?v=u6UeJXkzDW8 Does Gumout Actually Work in a Car: https://www.youtube.com/watch?v=5SoZnymBSC8 Data sheet from this test:https://www.dropbox.com/s/g7vypmac7sfd2t9/Results.jpg?dl=0 Graph from this test: https://www.dropbox.com/s/ufqjsn8mm0ku1x3/Graph.jpg?dl=0 Let me know if you got an increase or decrease in MPG if you try CleanBoost Maxx (updated Aug 29th 2015) # of Increased MPG: 24 # of Decreased/no change MPG: 15 After video Testers: rockman547- BMW- Decrease in mpg Preproto- Fiat- Increase chris ce- Increase Kevin Bridgman- Chevy Cavalier- Increase JerseyPrepper- Dodge Caravan- No change OfficialxElias- Subaru STI- Increase OfficialxElias- truck- no change djspbb- increase jdmmonsta- sti- no change kenny1234587doesMC- Vette- No change Luscious Matterhorn- GTO- no change Juan Cardenas- Saturn- decrease David S.- Increase paNic RELL - VW- Increase Jay Bizz- Increase Tanner Howell- Increase MODDED exe- STI- Increase Lazaro Hevia- C4 Vette- No Change _Husky- Dodge Daytona- Decrease Smashsify-6.0 powerstroke- Increase, Smashsify-6.6 duramax- Increase Smashsify-cat 3406e- No Change **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to recharge AC in a car. Want cold air in your car this summer? I show you a quick and cheap way to get cold air if you have a slow leak in your AC system by recharging your AC system with refrigerant. I chose this refrigerant because the sealer in this product is a conditioner so it wont damage the ac system or the ac recovery machines mechanics use. Refrigerant Kit I used: http://www.amazon.com/gp/product/B007USCM7E/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B007USCM7E&linkCode=as2&tag=chri0e2-20&linkId=JWYO5YCBLCTZZB6V Thermometer I used: http://www.amazon.com/gp/product/B00R4F0EL4/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00R4F0EL4&linkCode=as2&tag=chri0e2-20&linkId=QE7JA2SGTKOBXRXK How to Check Your AC System for Leaks: https://www.youtube.com/watch?v=pCv7rCdcXsc How to Install an AC Compressor: https://www.youtube.com/watch?v=rulXlnG2Unk How to Charge Your AC System: https://www.youtube.com/watch?v=Pdq8JAlct6s **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. At the 1:50 point in the video, I show the can of A/C Pro sitting on top of the engine block even though the engine is not hot and not running. NEVER, AT ANY TIME, PLACE A CAN OF A/C PRO ON YOUR ENGINE BLOCK (or any other hot area), as the heat from the engine can make the pressurized can explode causing severe damage to both you and your vehicle.”

Oil Change. Learn everything there is to know about how to change your oil. Even if you know nothing about cars, after this video, you will be able to change the oil in your car, yourself. I go over every step in detail and teach you everything there is to know about changing your oil. Synthetic Oil I Recommend: http://amzn.to/1qt4Szo Tools I used: Copper Gasket: http://amzn.to/1EY27fK Oil Filter Pliers: http://amzn.to/1gFiBxy Oil Drain Pan: http://amzn.to/1MnqHqP Socket Set: http://amzn.to/1IMqPh2 Breaker Bar: http://amzn.to/1La303D Funnel: http://amzn.to/2zTfBsr Race Ramps: http://amzn.to/1TBOxzz Car Ramps: http://amzn.to/1IMqYB6 Jack: http://amzn.to/1MnqO5D Jack Stands: http://amzn.to/1gFjbvv 300k Mile Oil Change: https://www.youtube.com/watch?v=oIG_BdsffcU 5min Oil Change: https://www.youtube.com/watch?v=rYWcL76WMRg Oil Filter Comparison: COMING SOON! Transmission Fluid Change: https://www.youtube.com/watch?v=yb_1wbiPz9g Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to replace outer tie rods. This video will show you in depth, how to change the inner tie rods of your car or truck. The job straight forward and anyone with basic tools can do it! Tie Rod Ends I used: http://www.amazon.com/s/ref=as_li_ss_tl?_encoding=UTF8&camp=1789&creative=390957&field-keywords=mevotech%20tie%20rod%20end&linkCode=ur2&sprefix=mevotech%20tie%20rod%20end%2Caps%2C164&tag=chri0e2-20&url=search-alias%3Daps&linkId=63UWMIG3HEDA5FLA Mevotech Tie Rods: http://www.mevotech.com/?s=tie+rods&post_type=product How to check to see if your tie rod is bad: https://www.youtube.com/watch?v=brI2feYiEi8 Inner and Outer Tie Rod Replacement: https://www.youtube.com/watch?v=05XOhz67jGA Outer Tie Rod Replacement in my Truck: https://www.youtube.com/watch?v=FxHnN9-rzoI Tie Rod End Cutaway: https://www.youtube.com/watch?v=3RjhtVse6jE HOMEMADE Penetrating Fluid: https://www.youtube.com/watch?v=2WuVBFTzoKc Socket set I use: http://www.amazon.com/gp/product/B000LY5AKU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000LY5AKU&linkCode=as2&tag=chri0e2-20&linkId=36ETFCATN72TTWX7 Torque Wrench I used: http://www.amazon.com/gp/product/B00C5ZL0RU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00C5ZL0RU&linkCode=as2&tag=chri0e2-20&linkId=UEPR3OTNXEWWGLKV Grease Gun: http://www.amazon.com/gp/product/B000288JE4/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000288JE4&linkCode=as2&tag=chri0e2-20&linkId=ZZ4HJDBMPF65KUTO Chassis Grease for the Tie Rod Ends: http://www.amazon.com/gp/product/B002KCWWFC/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B002KCWWFC&linkCode=as2&tag=chri0e2-20&linkId=JMIPQIFUL6EOYFXL **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Air conditioning compressor not working? Learn how to properly replace your air conditioning compressor so you can get cold air this summer! I show you how to replace an ac compressor in a Toyota Tacoma but the process is similar for any car or truck. This works for an A/C compressor clutch that wont engage and if you are not getting cold air because the compressor is bad. AC Manifold Gauges: http://amzn.to/1XrLgs6 Socket Set: http://amzn.to/1TOieNm Universal Joint Socket: http://amzn.to/1Xb53LL Serpentine Belt Tool: http://amzn.to/1R2hgv6 Torque Wrench: http://amzn.to/1VX9PO5 AC Compressor: http://amzn.to/2cVtg7f Panel Clip Pliers: http://amzn.to/2or8Quc How to Find an AC Leak: https://www.youtube.com/watch?v=pCv7rCdcXsc&list=PLDD611CFB36FC65F2 How to Properly Charge your AC System: https://www.youtube.com/watch?v=Pdq8JAlct6s&list=PLDD611CFB36FC65F2 How to Quick Charge your AC System: https://www.youtube.com/watch?v=SHg2xRMnM38 How to Replace an Alternator: https://www.youtube.com/watch?v=XC8W9RHGTMI Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Clogged or Low Flow EGR? Learn how to clean carbon buildup in the EGR valve which can cause check engine light codes P0400 though P0408. I also show you how to test your EGR valve to make sure it is working properly or if you need a new one. Where I got my EGR Valve: http://www.carpartkings.com/emission-control/egr-valve.html?utm_source=youtube&utm_medium=video&utm_term=egr_valve&utm_campaign=chris_fix The OBD2 Scanner App I used: https://www.youtube.com/watch?v=xPI36bKVCjk Where to get the OBD2 Scanner I used: http://amzn.to/1XNUGfz EGR Codes: P0400 Exhaust Gas Recirculation Flow Malfunction P0401 Exhaust Gas Recirculation Flow Insufficient Detected P0402 Exhaust Gas Recirculation Flow Excessive Detected P0403 Exhaust Gas Recirculation Circuit Malfunction P0404 Exhaust Gas Recirculation Circuit Range/Performance P0405 Exhaust Gas Recirculation Sensor A Circuit Low P0406 Exhaust Gas Recirculation Sensor A Circuit High P0407 Exhaust Gas Recirculation Sensor B Circuit Low P0408 Exhaust Gas Recirculation Sensor B Circuit High How to Flush Power Steering Fluid: https://www.youtube.com/watch?v=A0fiZCHz5ew How to Replace an Oxygen Sensor: https://www.youtube.com/watch?v=_Kr-c8eBl5E How to SUPER CLEAN a Windshield: https://www.youtube.com/watch?v=vJkfrY2owb0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Belt squeal, squeaky belt, belt noise? Learn how to fix a squeaky belt in your car. Usually the belt noise comes from the belt tensioner pulley, idler pulley, or the belt itself. The serpentine belt in your car powers the accessories such as air conditioning, power steering, the alternator, fan, and waterpump. There are three types of serpentine belt wear, pilling, glazing, and abrasion. Pulley wear will cause your pulley to squeak. A worn out pulley bearing or a worn spring in the tension pulley can also cause squeaking. I show you how to use water to identify what type of squeak problem you have and then how to find the problem. Here is the belt that will get rid of the squeak due to misalignment: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=gatorback%20belts&linkCode=ur2&rh=i%3Aaps%2Ck%3Agatorback%20belts&tag=chri0e2-20&url=search-alias%3Daps&linkId=RR2BPLQO7JXS3LTH Diagnose a Squeaky Belt Part 2: https://www.youtube.com/watch?v=AEUe6uKxTv8 Replace Idler Pulley: https://www.youtube.com/watch?v=axAltpW8wR4 Replace Tensioner Pulley: https://www.youtube.com/watch?v=G4PS7WHlgi0 WD40 to quiet the belt: https://www.youtube.com/watch?v=Fv6zuTT9YOI **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Alternator Replacement. Learn how to remove and replace a bad alternator and correctly install a new alternator with this simple step by step video. Whether the alternator is not putting out the correct voltage or it is making noise from a bad bearing, you can fix it yourself and save a lot of money. Where I got my Alternator: http://amzn.to/2iJ3kgW Socket Set I used: http://amzn.to/2iJfjLi Serpentine Belt Tool: http://amzn.to/2iJbbuR Torque Wrench: http://amzn.to/2icd1Hu How to Test an Alternator: https://www.youtube.com/watch?v=LGB6ZEjGm7Q How to Test your Car Battery: https://www.youtube.com/watch?v=COJr7OB23Hw How to do an Electrical System Upgrade: COMING SOON! **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every week** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This giveaway is thanks for all of the support from my awesome subscribers! Next lets hit 500k subscribers! Congratulations to all of the winners and check your email tonight for an email from me! Thanks again everyone! If you didnt win and want a bluedriver here is where to get one: http://amzn.to/1XNUGfz Original Giveaway Video: https://www.youtube.com/watch?v=FOuCGG0__oE **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Official ChrisFix Giveaway Rules 1.) This giveaway is for subscribers and is free to enter (1 entree per subscriber) 2.) You must be 18 years or older (or have your parents’ permission if younger) and the giveaway is open world wide 2.a) If you do not live in the USA, you must pay the shipping charge for your prize. 3.) To enter you need to submit your name and email address on ChrisFixed.com 4.) The giveaway opens Thursday June 25th at 6pm EST and closes July 6th at 6am EST with a video announcing the winners. 5.) This giveaway abides by all rules state by the YouTube Community Guidelines http://www.youtube.com/yt/policyandsafety/communityguidelines.html 6.) This giveaway complies with all applicable federal, state and local laws, rules and regulations including U.S. sanctions 7.) YouTube is not a sponsor and is not liable for anything related to this contest 8.) Any personal data (address, email, name, etc) will be kept private and be used for ChrisFix and the contest only to contact the winners. 9.) The odds of winning are based on how many people enter the contest a. The maximum number of entrants are based off of the number of subscribers ChrisFix has. 10.) There will be 9 winners of the BlueDriver and 1 grand prize winner of the Bluedriver, Ipad, and Ipad case for a total of 10 winners 11.) Each winner will be chosen at random using a random number generator 12.) Winners will be contacted via email and a video 13.) This giveaway does not encourage you to comment, share, “like” or subscribe and it will not increase your chances to win. Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how To Find and Repair AC Leaks. Air conditioner not blowing cold air? Leak in your A/C system? See how to recharge your A/C system, find the refrigerant leak, and fix it so you can get back on the road with cold air conditioning this summer. A/C Refrigerant Kit I used: http://amzn.to/245XTsB How to Replace an Air Compressor: https://www.youtube.com/watch?v=rulXlnG2Unk&list=PLDD611CFB36FC65F2 How to Properly Charge an AC System: https://www.youtube.com/watch?v=Pdq8JAlct6s&list=PLDD611CFB36FC65F2 How to Fix a Car with No Heat: https://www.youtube.com/watch?v=-XjXTVJhFLM&list=PLDD611CFB36FC65F2 I show you how to use UV dye in the refrigerant so that you can spot where the leak is and fix the problem. The R134a refrigerant system should be a sealed system with no leaks, but in this case the air conditioning compressor was leaking. Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Enter here: ChrisFixed.com This giveaway is thanks for all of the support from my awesome subscribers! Next lets hit 500k subscribers! Video announcing winners: https://www.youtube.com/watch?v=kbMwZ41Imh8 BlueDriver Product Review Video: https://www.youtube.com/watch?v=xPI36bKVCjk Original Giveaway Video: https://www.youtube.com/watch?v=FOuCGG0__oE Official ChrisFix Giveaway Rules 1.) This giveaway is for subscribers and is free to enter (1 entree per subscriber) 2.) You must be 18 years or older (or have your parents’ permission if younger) and the giveaway is open world wide 2.a) If you do not live in the USA, you must pay the shipping charge for your prize. 3.) To enter you need to submit your name and email address on ChrisFixed.com 4.) The giveaway opens Thursday June 25th at 6pm EST and closes July 6th at 6am EST with a video announcing the winners. 5.) This giveaway abides by all rules state by the YouTube Community Guidelines http://www.youtube.com/yt/policyandsafety/communityguidelines.html 6.) This giveaway complies with all applicable federal, state and local laws, rules and regulations including U.S. sanctions 7.) YouTube is not a sponsor and is not liable for anything related to this contest 8.) Any personal data (address, email, name, etc) will be kept private and be used for ChrisFix and the contest only to contact the winners. 9.) The odds of winning are based on how many people enter the contest a. The maximum number of entrants are based off of the number of subscribers ChrisFix has. 10.) There will be 9 winners of the BlueDriver and 1 grand prize winner of the Bluedriver, Ipad, and Ipad case for a total of 10 winners 11.) Each winner will be chosen at random using a random number generator 12.) Winners will be contacted via email and a video 13.) This giveaway does not encourage you to comment, share, “like” or subscribe and it will not increase your chances to win. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

UPDATE: https://www.youtube.com/watch?v=kbMwZ41Imh8 Enter here: www.ChrisFixed.com This giveaway is thanks for all of the support from my awesome subscribers! Next lets hit 500k subscribers! BlueDriver Product Review Video: https://www.youtube.com/watch?v=xPI36bKVCjk Official ChrisFix Giveaway Rules 1.) This giveaway is for subscribers and is free to enter (1 entree per subscriber) 2.) You must be 18 years or older (or have your parents’ permission if younger) and the giveaway is open world wide 2.a) If you do not live in the USA, you must pay the shipping charge for your prize. 3.) To enter you need to submit your name and email address on http://www.ChrisFixed.com 4.) The giveaway opens Thursday June 25th at 6pm EST and closes July 6th at 6am EST with a video announcing the winners. 5.) This giveaway abides by all rules state by the YouTube Community Guidelines http://www.youtube.com/yt/policyandsafety/communityguidelines.html 6.) This giveaway complies with all applicable federal, state and local laws, rules and regulations including U.S. sanctions 7.) YouTube is not a sponsor and is not liable for anything related to this contest 8.) Any personal data (address, email, name, etc) will be kept private and be used for ChrisFix and the contest only to contact the winners. 9.) The odds of winning are based on how many people enter the contest a. The maximum number of entrants are based off of the number of subscribers ChrisFix has. 10.) There will be 9 winners of the BlueDriver and 1 grand prize winner of the Bluedriver, Ipad, and Ipad case for a total of 10 winners 11.) Each winner will be chosen at random using a random number generator 12.) Winners will be contacted via email and a video 13.) This giveaway does not encourage you to comment, share, “like” or subscribe and it will not increase your chances to win. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

I drive the future of commuter cars, the 3-wheeled, $6800 Elio by Elio Motors. This car gets 84mpg highway and 49mpg city with an all new 3 cylinder .9L engine. The Elio will be built in the USA, and forever change the way we commute in America. https://www.eliomotors.com/ About the Elio: -49/84mpg city/highway -$6800 Brand New -3yr 36,000mi warranty -new 3cyl .9L fuel injected engine -12:1 compression ratio, uses regular gas -5 speed auto or manual transmission -2 seats -Safety: ABS, Stability Control, 3 airbags -Standard: Power locks and windows, AC, -90% American Parts and Made in the USA **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Wheel bearing noise? Learn how to find and how to tell if your wheel bearing is bad. I show you what the wheel bearing noise sounds like while driving, what the play in the wheel looks like, and how to check the abs light if you have one. I also go over a few other tips about the wheel bearing so you can tell if yours is bad or not. Scanner I used to check the ABS light: http://amzn.to/1XNUGfz How to Replace a Wheel Bearing: https://www.youtube.com/watch?v=fe_WtKIKlYA What Abuse Does Your Suspension Take Every Day: https://www.youtube.com/watch?v=MEZSB1JglDM How to Check a Ball Joint: https://www.youtube.com/watch?v=62bVn7E8gyk **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Car Bumper Repair fast, cheap and easy! Lean how to repair a cracked bumper with cable ties. It is like stitches for a car. This method is used by race car drivers around the world to repair their bumpers fast and cheap so they can get back on the race course if a bumper is damaged. Plus, it looks pretty cool. Every Color Zip Tie you can imagine: http://www.amazon.com/gp/product/B009OM0FX2/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B009OM0FX2&linkCode=as2&tag=chri0e2-20&linkId=H7MCERW6RGNEUQBL Make your own Spark Plug Wire Loom (zip ties): https://www.youtube.com/watch?v=xWO1Oes7oJw Top 10 Car Cleaning Mistake: https://www.youtube.com/watch?v=ef_-SNSnByg Project Night Light: https://www.youtube.com/watch?v=qp9L00SMSHQ Thanks to my buddy Chris for letting me use his drifting footage for this video. Here are Chris's awesome photography pages (if you like cars, check it out): -www.pistonringmedia.com -https://instagram.com/pistonringmedia/ **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

I am doing a fuel economy test with one of the additives I have already tested. We know it makes more horsepower and torque but this time we are testing fuel economy and I need your help. I am looking for 20 subscribers who drive over 300+mi per week who want to test out this product (I will send you a small bottle). If you want to help, start tracking your fuel economy now and comment below your average weekly mileage, year, make and model car. The Test Is Complete!!! Here is the video: https://www.youtube.com/watch?v=DUkICPS0zQE Here is the packet with the info for the test: https://www.dropbox.com/s/zhy1zvusf5r1xuq/ChrisFix%20Boost%20Maxx%20MPG%20Test.pdf?dl=0 Two places to get the fuel additive: http://www.amazon.com/gp/product/B00MEW927O/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00MEW927O&linkCode=as2&tag=chri0e2-20&linkId=CNOGC5Z2I63WZ6E3 or http://bit.ly/boostperfmaxx CleanBoost Maxx Test on the Dyno: https://www.youtube.com/watch?v=VDUogAQzLAc Seafoam Test: https://www.youtube.com/watch?v=u6UeJXkzDW8 Techron Test: https://www.youtube.com/watch?v=h8i9qftqKNY **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Wheel Bearing Replacement. Learn how to replace a wheel bearing hub assembly. This is a 2007 Mercury Mountaineer, Ford Explorer but the process will be very similar for replacing any wheel bearing hub assembly with an axle running through it. I was quoted over $650 at the stealership to do the job again so save a ton of money and do it yourself and do it properly so it won’t fail again. Here is the wheel bearing hub assembly I used: http://www.mevotech.com/product/hub-assemblies/ How to Replace another wheel bearing hub assembly (Pontiac G8): https://www.youtube.com/watch?v=04AyCYIUEWQ Wheel Bearing Cutaway: COMING SOON!!! How to Tell if a Wheel Bearing is Bad: https://www.youtube.com/watch?v=YvKWGjmPKoc How to Replace a Pressed in Wheel Bearing: https://www.youtube.com/watch?v=fLSXQ_LLpWY Home-made penetrating fluid: https://www.youtube.com/watch?v=2WuVBFTzoKc BlueDriver OBD2 Scanner Product Review: https://www.youtube.com/watch?v=xPI36bKVCjk Tools: OBD2 Scanner (Bluedriver): http://amzn.to/1XNUGfz Breaker Bar: http://amzn.to/2C15v8Z Slide Hammer: http://amzn.to/2ksqitJ Socket Set: http://amzn.to/2lpDVOE 3/8 Ratchet: http://amzn.to/2kxNRE0 Torque Wrench: http://amzn.to/2ltUBk6 Antiseize: http://amzn.to/2kYQUpg **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to Install a Light bar. In this episode of Project Night Light, I show you how to wire an LED light bar properly using a relay. I go though every step so after watching this you will know how to wire any auxiliary light you want. At the end of the episode I show how insanely bright the light bar is! Project Night Light Episode 1: https://www.youtube.com/watch?v=qp9L00SMSHQ Project Night Light Episode 2: https://www.youtube.com/watch?v=Amc-BfSh25E Project Police Interceptor: https://www.youtube.com/watch?v=lPW2F_NZj1w How to Wire Bed Lights: COMING SOON How a Relay Works: COMING SOON Wurton Light Bar I installed: http://www.amazon.com/gp/product/B00KQHHLH2/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00KQHHLH2&linkCode=as2&tag=chri0e2-20&linkId=JPBV6E3MYH4XXLPW Wire Crimper I use: http://www.amazon.com/gp/product/B00079LN1Y/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00079LN1Y&linkCode=as2&tag=chri0e2-20&linkId=ABKWBC2JZNT7PY4L Automatic Wire Stripper I use: http://www.amazon.com/gp/product/B000OQ21CA/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000OQ21CA&linkCode=as2&tag=chri0e2-20&linkId=YTFSUYFNHY3RKOBZ Panel Clip Pliers I use: http://www.amazon.com/gp/product/B003WZRLZ2/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B003WZRLZ2&linkCode=as2&tag=chri0e2-20&linkId=KDEOPRPLNEZWA4SG Fuse Tap I used: http://www.amazon.com/gp/product/B00SUTYYS2/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00SUTYYS2&linkCode=as2&tag=chri0e2-20&linkId=OX4QS5NJOODWDBYO Grommets I used: http://www.amazon.com/gp/product/B003NRF052/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B003NRF052&linkCode=as2&tag=chri0e2-20&linkId=C2K4HKUNMTACWTGO Heat Shrink I used: http://www.amazon.com/gp/product/B00EXLPLTW/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00EXLPLTW&linkCode=as2&tag=chri0e2-20&linkId=RN65HE27TKCCL57O Wiring chart I used to get the proper gauge wire: https://www.dropbox.com/s/sbs651puccpxp5j/USCG%20ChrisFix%20Wiring%20Chart.jpg?dl=0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

In this video we see footage of shocks in action under the car while going over a bumpy roadway, a highway, stop and go traffic, and speed bumps. I compare the original shocks that are 14 years old and have 125,000 miles on them with brand new Monroe Sensa-Trac shocks to see the difference. Shocks I used: http://amzn.to/1bTGwqq Camera I used to film: http://amzn.to/1A3S1r6 Paint I used on the rear axle: http://www.amazon.com/gp/product/B005H5P5C6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B005H5P5C6&linkCode=as2&tag=chri0e2-20&linkId=KJMPMAQUU2IFRIBS How to tell if your shocks are bad: COMING SOON!!! How to replace front shocks: https://www.youtube.com/watch?v=E6dEXhEGoU8 How to replace rear shocks: https://www.youtube.com/watch?v=D9iUXR1tdO8 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This is how I recharge my aerosol spray cans such as wd40, carb cleaner, pb blaster, etc. A lot of times the air leaks out over time or you use half of the can but the propellant gets used up and you have to throw away the can. I go over two methods to refill the propellant in aerosol cans so you can save money! Valve stems: http://amzn.to/1DVd1ey Air Compressor to fill the cans: http://amzn.to/1JuLcyo Compressor spray adapter: http://amzn.to/1F2ikOk Homemade Penetrating Fluid: https://www.youtube.com/watch?v=2WuVBFTzoKc How to Defog your Windows: https://www.youtube.com/watch?v=8Vj9avZxuwI Permanent Headlight Restoration: https://www.youtube.com/watch?v=UEJbKLZ7RmM Thanks to sixtyfiveford for the idea of using a tire stem as another method as he showed in his video so we have options: https://www.youtube.com/watch?v=mimSDtqljMA **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Can using a fuel additive increase HP and Torque? For this video we are testing CleanBoost Maxx which claims to increase horsepower and fuel economy. Where I bought Clean Boost Maxx: http://www.amazon.com/gp/product/B00MEW927O/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00MEW927O&linkCode=as2&tag=chri0e2-20&linkId=7VHEGS43F5KCXNUL I tested this additive to see if it increased fuel economy in this video: https://www.youtube.com/watch?v=DUkICPS0zQE We are at East Coast Supercharging testing a Honda Civic Si on the dyno to get accurate HP and Torque numbers before and after adding CleanBoost Maxx to the gas to see if it really works... So what do we think? Is horsepower in a can real? Here are the dyno graphs: https://www.dropbox.com/sh/dl46pwult7nspmg/AACxXh4Y6P_a2-8OCys-MLeGa?dl=0 Seafoam in a Car: https://www.youtube.com/watch?v=u6UeJXkzDW8 Seafoam in a Lawn Mower https://www.youtube.com/watch?v=WdT4DPFXIkM Here is the Techron Test: https://www.youtube.com/watch?v=h8i9qftqKNY Lucas Deep Clean Test: https://www.youtube.com/watch?v=FLhXqgEEYyI Gumout "all in one" fuel system cleaner test: https://www.youtube.com/watch?v=5SoZnymBSC8 Lucas Fuel System Cleaner test: https://www.youtube.com/watch?v=FLhXqgEEYyI **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

In this video I test Seafoam in a Honda Civic Si. I use a mini borescope camera to look into the engine and see how dirty the engine is before the fuel treatment and then after the fuel treatment. I followed the instructions on the container and seafoam did a great job cleaning a good amount of carbon off the piston head. I am impressed by the results and finally we have proof that seafoam actually works! Here is the fuel cleaner I used: http://amzn.to/2gEa5Qr Here is the borescope camera I used: http://amzn.to/2hiumyG Royal Purple Max Clean Test: https://www.youtube.com/watch?v=BocH2c4mYcc Seafoam in a Lawn Mower https://www.youtube.com/watch?v=WdT4DPFXIkM Here is the Techron Test: https://www.youtube.com/watch?v=h8i9qftqKNY Lucas Deep Clean Test: https://www.youtube.com/watch?v=FLhXqgEEYyI Gumout "all in one" fuel system cleaner test: https://www.youtube.com/watch?v=5SoZnymBSC8 Lucas Fuel System Cleaner test: https://www.youtube.com/watch?v=FLhXqgEEYyI CleanBoost Maxx Test: https://www.youtube.com/watch?v=VDUogAQzLAc **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Watch me turn this beat up 2005 Ford Crown Victoria P71 into a police car for a local police officer. In today's episode of Project Police Interceptor, we install a siren! ***This car is for a police officer who can legally use it. You cannot use a police sirens legally if you are not a cop. Make sure you check your local laws before installing any aftermarket noise makers including a siren*** Wire Crimper I use: http://amzn.to/25T9k9S Automatic Wire Stripper I use: http://amzn.to/22ZOKmr Episode 1: https://www.youtube.com/watch?v=lPW2F_NZj1w&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 2: https://www.youtube.com/watch?v=V_mXR_Kol4Q&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 3: https://www.youtube.com/watch?v=gIZZwcKqSkI&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 4: https://www.youtube.com/watch?v=p73MsP4VSUU&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 5: https://www.youtube.com/watch?v=1-F0PIF8Hqo&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Wiring chart I used to get the proper gauge wire: https://www.dropbox.com/s/sbs651puccpxp5j/USCG%20ChrisFix%20Wiring%20Chart.jpg?dl=0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Watch me turn this beat up 2005 Ford Crown Victoria P71 into a police car for a local police officer. Today's episode of Project Police Interceptor, we put new headlights in and a grill we scavenged from the junk yard to make this Crown Vic look great safe to drive at night. We also fix the police spot light which was not working! Socket Set I use: http://amzn.to/1szydZN Episode 2: https://www.youtube.com/watch?v=V_mXR_Kol4Q&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 3: https://www.youtube.com/watch?v=gIZZwcKqSkI&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 4: https://www.youtube.com/watch?v=p73MsP4VSUU&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 5: https://www.youtube.com/watch?v=1-F0PIF8Hqo&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb How to Restore Headlights: https://www.youtube.com/watch?v=UEJbKLZ7RmM How to Aim Headlights: https://www.youtube.com/watch?v=qDudMM4J-ZE **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Join me in building a custom LED light bar mount for my truck. I start with a drawing and some pieces of metal and make it into a fully functional rig to hold my 42in LED Light Bar. The rack consists of bed rails, a headache rack, and a roof rack, all-in-one, to hold the light bar. I use 1.5in .083 wall square tubing, a 90amp harbor freight flux welder, a grinder, and a cutoff wheel to get the job done. Episode 1:https://www.youtube.com/watch?v=qp9L00SMSHQ&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Episode 3: How to Wire an LED Light Bar Properly: https://www.youtube.com/watch?v=b8GY69Ci7l4&list=PLvKbarVtwhUvttF8SaaIrpSYX4walXQCb Here is where I got the 42in Wurton lightbar: http://amzn.to/29OF8s0 Welder I used to make my rig: http://amzn.to/29JZbYh Grinder I used: http://amzn.to/29OEHOG Cutoff Wheel I used: http://amzn.to/29VPFRH Herculiner Paint: http://amzn.to/2ag9z8J Tap and Die Set I used to thread the bolt into the metal: http://amzn.to/29IUtsJ Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Join me in building a custom LED light bar mount for my truck. I start with a drawing and some pieces of metal and make it into a fully functional rig to hold my 42in LED Light Bar. The rack consists of bed rails, a headache rack, and a roof rack, all-in-one, to hold the light bar. I use 1.5in .083 wall square tubing, a 90amp harbor freight flux welder, a grinder, and a cutoff wheel to get the job done. Episode 2: https://www.youtube.com/watch?v=Amc-BfSh25E Episode 3 (wiring the lights): https://www.youtube.com/watch?v=b8GY69Ci7l4 Here is where I got the 42in Wurton lightbar: http://www.amazon.com/gp/product/B00KQHHLH2/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00KQHHLH2&linkCode=as2&tag=chri0e2-20&linkId=JPBV6E3MYH4XXLPW Welder I used to make my rig: http://www.amazon.com/gp/product/B006ZB9DJM/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B006ZB9DJM&linkCode=as2&tag=chri0e2-20&linkId=AQVSWTQLQV2NOHN7 Grinder I used: http://www.amazon.com/gp/product/B0015Z5GAI/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0015Z5GAI&linkCode=as2&tag=chri0e2-20&linkId=NOSAZ2VST3DIBB7S Cutoff Wheel I used: http://www.amazon.com/gp/product/B0064UQO8M/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0064UQO8M&linkCode=as2&tag=chri0e2-20&linkId=F4W7MUMKRXA4JGN5 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Need new brake pads and rotors? Learn how to replace your brakes yourself and save more than half the cost of a shop! I show you every step including how to remove and install pads and rotors, where to use brake grease, how to grease the guide pins, and how to torque the bolts for a safe and complete brake job. Find your car's repair manual: http://www.repairsurge.com/?source=1 Brake Pads and Rotors: http://amzn.to/29VpD1B Brake Compressor Tool: http://amzn.to/1YWFuNC The Socket Set I use: http://amzn.to/1YWFnSi Here is the Silicone Paste I used: http://amzn.to/1XSnlCg Torque wrench I use: http://amzn.to/22o4uiV 3 Ton Jack: http://amzn.to/22o4kYF Breaker Bar: http://amzn.to/1sOC0D2 Caliper Guide Pin Video: https://www.youtube.com/watch?v=Gdc3PZ0gFvA Truck Brake Pad and Rotor Replacement Video: https://www.youtube.com/watch?v=UlbFFq60Tec Drum Brake Replacement Video: https://www.youtube.com/watch?v=zJ_UXP6GWkw Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to lubricate caliper slider pins. The caliper guide pins are essential to the disc brake system. If the caliper pins are not free moving, the brake pads could wear unevenly and you can have premature wear in your brake system. Learn how to prevent uneven brake pad wear and how to properly lube the guide pins. Here is the Silicone Paste I used: http://www.amazon.com/gp/product/B005RNEH5O/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B005RNEH5O&linkCode=as2&tag=chri0e2-20&linkId=LGQ5CIGWERTJ6KSH **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Car won't start and you lost all electrical power? Check the fusible link. A fusible link is just like any other car fuse, but instead of being plastic, it is a thin wire with a thick insulator. To properly connect a fusible link you need to use a crimp, solder, and shrink-wrap the connection. Soldering Iron that is really good: http://www.amazon.com/gp/product/B002I7X7ZS/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B002I7X7ZS&linkCode=as2&tag=chri0e2-20&linkId=4QJFO6FBVGCPESKW Helping hand wire holder: http://www.amazon.com/gp/product/B000RB38X8/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000RB38X8&linkCode=as2&tag=chri0e2-20&linkId=B3TBLLD3SZYJUTDB Fusible Link Wire: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=fusible%20link&linkCode=ur2&sprefix=fusible%20li%2Caps&tag=chri0e2-20&url=search-alias%3Daps&linkId=SGSAQ2B7ROBI7G43 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Lear how to diagnose your "check gas cap light" or a check engine light that has EVAP codes. I also explain how the EVAP system works in simple terms so you can get a basic understanding of what it does. Locking gas cap: http://amzn.to/1Ucj4qd EVAP System Check Engine Light Codes: P0440 Evaporative Emission Control System Fault P0441 Evaporative Emission Control System Incorrect Purge Flow P0442 EVAP Emission Control System Leak Detected (small leak) P0443 EVAP Emission Control System Purge Control Valve Circuit P0444 EVAP Purge Control Valve Circuit Open P0445 EVAP Purge Control Valve Circuit Shorted P0446 Evaporative Emission Control System Vent Control Circuit P0447 EVAP Emission Control System Vent Control Circuit Open P0448 EVAP Emission Control System Vent Control Circuit Shorted P0449 EVAP Emission Control System Vent Valve/Solenoid Circuit P0450 Evaporative Emission Control System Pressure Sensor P0451 EVAP Emission Control System Pressure Sensor P0452 EVAP Emission Control System Pressure Sensor Low Input P0453 EVAP Emission Control System Pressure Sensor High input P0454 EVAP Emission Control System Pressure Sensor Intermittent P0455 EVAP Emission Control System Leak Detected (gross leak) P0456 EVAP Emission Control System Leak Detected (small leak) P0457 EVAP Emission Control System Leak Detected (fuel cap) **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to flush your cooling system including the radiator, heater core, and engine block. I go though every step to SUPER FLUSH your cooling system completely. My truck's cooling system was really really bad and it needed a good flush. Now the cooling system is filled with brand new coolant and is clean! If your system is old or dirty, that dirt could be clogging holes in hoses, seals, and gaskets so take that into consideration when you do this. Spill free funnel I was talking about: http://amzn.to/2gfZqOn Black Socket Set I use: http://amzn.to/2gFpZJP Hose Clamp Pliers: http://amzn.to/2gg4ORR Large Drain Pan: http://amzn.to/2gFhjTI Universal Antifreeze: http://amzn.to/2fIiNeW Quick Flush your Cooling System: https://www.youtube.com/watch?v=g8YZF5cW7-A Here is How to Test your Cooling System: https://www.youtube.com/watch?v=mHTM3dvpD1M Here is how to Flush your Heater Core: https://www.youtube.com/watch?v=LD2LGkUycQg **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Reset the maintenance required light in a Toyota after you change your oil so you know when to do your next oil change. This process works on most Toyotas including Camry, Tacoma, Corolla, Avalon, Tundra, Sienna, Rav4, 4Runner, and many more. Step 1: Turn the car to the "run" position and make sure the odometer is showing (some Toyota's need to be on "Trip A" Step 2: Hold down the "reset trip" button and shut the car off. Step 3: Keep holding the "reset trip" button and turn the key to the "run" position. Step 4: Wait for the "Reset maintenance required" light to shut off and then you are done. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This is my independent review for the Lemur Monitors Blue Driver OBD2 Scanner. This is my go-to scanner. If you need to get yourself a scanner, I would seriously consider the BlueDriver because not only can you read and clear the typical check engine light codes, you can also read and clear airbag, transmission, ABS, and other module codes (for Ford, GM, and Chrysler vehicles and now it works on Toyota too!). Here is where you can get the BlueDriver: http://amzn.to/1XNUGfz Other Information: http://www.lemurmonitors.com/ -The app is easy to use and has a clean interface. -Reads and clears the check engine, abs, airbag, transmission, and other module lights -Works with Bluetooth Phones and Tablets, Android 4.0+ and iOS 7+ -View Freeze Frame Data -View Mode 6 Data -Run an emissions smog check -Repair reports help you figure out the most common fix for your problem -Live Data can be graphed **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Dashboard lights out? Learn how to replace dash lights in your Ford, Lincoln, Mercury, and Mazda so you dont have to drive around trying to see your speedometer at night. After watching this video you will be able to change your dash lights because I go into step by step specifics. Although this video is specific to Fords, the basic process will be similar for most makes and models. 194 Long Life bulbs I used: http://www.amazon.com/gp/product/B000BLNTP6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000BLNTP6&linkCode=as2&tag=chri0e2-20&linkId=TCPBDZORCHHMV4EN 74 Long Life bulbs (the smaller ones I didnt change): http://www.amazon.com/gp/product/B00318V1BU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00318V1BU&linkCode=as2&tag=chri0e2-20&linkId=C5V46ABMRBIULB2W Composite Ratchet I use: http://www.amazon.com/gp/product/B00A50N9V2/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00A50N9V2&linkCode=as2&tag=chri0e2-20&linkId=T6G6EQ72EWDLXVTS Socket Set I used: http://amzn.to/1AUbx4f Torx Bit Multitool: http://amzn.to/21q5MI6 How to Align Shift Indicator: https://www.youtube.com/watch?v=wzhUYwx34gM How to Fix a Loose Shifter: https://www.youtube.com/watch?v=LKqiDy_Po2M **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to Defog your Car Windows, Learn how to defog your windows. I test RainX and home remedies to see what works best. I use RainX, shaving cream, baby shampoo, potatoes, and hand sanitizer to see which ones really work to defog your windshield. For SCUBA diving, I use baby shampoo and old timers mention potatoes, but I think I will be using shaving cream for now on! Here is my Newest Defog Mythbusting video where I test different house-hold products: https://www.youtube.com/watch?v=8-IwmwzaHD0 RainX Defogger: http://www.amazon.com/gp/product/B0009H5W5W/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0009H5W5W&linkCode=as2&tag=chri0e2-20&linkId=UXUYLG3YEAJIWE4P Shaving Cream I used: http://www.amazon.com/gp/product/B001E5E24K/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B001E5E24K&linkCode=as2&tag=chri0e2-20&linkId=MF46O6WNTNBX2ESX **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

In this video I tested Lucas Deep Clean. I use a mini borescope camera to look into the engine and see how dirty the engine is before the fuel treatment and then after the fuel treatment. I followed the instructions on the container and Lucas performed a little better than Techron and Gumout. This is the 4th test in a series of fuel cleaner test I will be performing to see how fuel cleaners work and if they actually work. Here is the fuel cleaner I used: http://www.amazon.com/gp/product/B003JTYGPO/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B003JTYGPO&linkCode=as2&tag=chri0e2-20&linkId=G7HYTNQFS4A74QOA Here is the borescope camera I used: http://www.amazon.com/gp/product/B00JERRES6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00JERRES6&linkCode=as2&tag=chri0e2-20&linkId=PWJIOJANWO4OKX7I Royal Purple Max Clean Test: https://www.youtube.com/watch?v=BocH2c4mYcc Gumout Test: https://www.youtube.com/watch?v=5SoZnymBSC8 Seafoam Test in a Car: https://www.youtube.com/watch?v=u6UeJXkzDW8 Seafoam in Lawnmower: https://www.youtube.com/watch?v=WdT4DPFXIkM Techron Test: https://www.youtube.com/watch?v=h8i9qftqKNY CleanBoost Maxx Test: https://www.youtube.com/watch?v=VDUogAQzLAc **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Jump start a Car. Anyone who drives should know how to safely jump start their car because one day your battery will be dead. Whether you left your lights on or your battery goes bad, knowing how to jump your car safely and properly will keep you from getting stranded. What do to if your car wont start: https://www.youtube.com/watch?v=fRfPupikHT4 How to check a car battery (In-depth video): https://www.youtube.com/watch?v=COJr7OB23Hw How to test an alternator: https://www.youtube.com/watch?v=LGB6ZEjGm7Q How to check for a short or parasitic draw: https://www.youtube.com/watch?v=n5FJDgcdii8 Portable car battery jumper: http://amzn.to/2jGa930 Good jumper cables (20ft long and thick wiring): http://amzn.to/2nwgB07 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every week** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

A car that won't start can be caused by many different problems from low fuel pressure to no spark. In this case, I have no clue what the problem is and I go though my methodology to figure out the problem. (Spoiler alert) It ends up being a bad battery which is probably the most common no start problem. An amazing portable car battery jumper: http://amzn.to/1UAp91u Multimeter: http://amzn.to/28KCGcU How to check a car battery (In-depth video): https://www.youtube.com/watch?v=COJr7OB23Hw How to test an alternator: https://www.youtube.com/watch?v=LGB6ZEjGm7Q How to check for a short or parasitic draw: https://www.youtube.com/watch?v=n5FJDgcdii8 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Oxygen sensors (Air fuel ratio sensors) are a common problem on many vehicles. A P1155 or P1135 code indicates you have a bad sensor. This is common in Toyota and Lexus cars and trucks. Learn how to test the air fuel ratio sensor to see if it is bad, and then learn how to replace the bad sensor. Nice O2 Sensor Socket Kit: http://www.amazon.com/gp/product/B005SMUORO/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B005SMUORO&linkCode=as2&tag=chri0e2-20&linkId=Y3D4ZF62DSRUJ3CT OBD2 Scanner to get the codes: http://www.amazon.com/gp/product/B00652G4TS/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00652G4TS&linkCode=as2&tag=chri0e2-20&linkId=VBOTJXMIWC2MKTZ2 Multimeter I used: http://www.amazon.com/gp/product/B001O1X65A/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B001O1X65A&linkCode=as2&tag=chri0e2-20&linkId=SCFDOB4EFQYDCZR2 Here is where to get inexpensive A/F Ratio Sensors: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=air%20fuel%20ratio%20sensor&linkCode=ur2&sprefix=air%20fuel%20ratio%20s%2Cautomotive&tag=chri0e2-20&url=search-alias%3Dautomotive&linkId=7R4JTUCKCJQBTOSV Some background info on difference of Oxygen Sensors and Air/Fuel Ratio Sensors. What distinguishes Air Fuel Ratio Sensors from regular O2 sensors is that the AFR Sensor is what is known as a wide range O2 sensor whereas the basic O2 sensor is a narrow range sensor. It can detect a wider range of air/fuel ratios than the basic O2 sensor. Also, the AFR Sensor has a little bit more circuity to enable it to detect more minute variations in the exhaust system air content (more sensitive than the O2 sensor). Therefore, it is able to make better adjustments through the ECM to add or subtract fuel to produce a better mix of air/fuel to maximize efficiency and minimize emissions. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Belt squeal, squeaky belt, belt noise? Learn how to fix a squeaky belt in your car. The serpentine belt in your car powers the accessories such as air conditioning, power steering, the alternator, fan, and waterpump. There are three types of serpentine belt wear, pilling, glazing, and abrasion. Pulley wear will cause your pulley to squeak. A worn out pulley bearing or a worn spring in the tension pulley can also cause squeaking. I show you how to use water to identify what type of squeak problem you have and then how to find the problem. Here is the belt that will get rid of the squeak due to misalignment: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=gatorback%20belts&linkCode=ur2&rh=i%3Aaps%2Ck%3Agatorback%20belts&tag=chri0e2-20&url=search-alias%3Daps&linkId=RR2BPLQO7JXS3LTH Here is the serpentine belt tool: http://www.amazon.com/gp/product/B0014WDKQ4/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0014WDKQ4&linkCode=as2&tag=chri0e2-20&linkId=LBTATM44E2Z7NOI4 Find the Belt Squeak: https://www.youtube.com/watch?v=Au6YzsEKPRQ Replace Idler Pulley: https://www.youtube.com/watch?v=axAltpW8wR4 Replace Tensioner Pulley: https://www.youtube.com/watch?v=G4PS7WHlgi0 WD40 to quiet the belt: https://www.youtube.com/watch?v=Fv6zuTT9YOI **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Is your car or truck ready for the snow? Going out on the road during a blizzard can become dangerous quickly. This video goes though the items I keep in my car so I am prepared for a blizzard. This includes, food, water, warm clothes, and a fully charged cell phone. My led flashlight: http://www.amazon.com/gp/product/B007RB82CS/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B007RB82CS&linkCode=as2&tag=chri0e2-20&linkId=LY4HGPORKLDH7FRR The cell phone charger: http://www.amazon.com/gp/product/B00MQYS97Y/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00MQYS97Y&linkCode=as2&tag=chri0e2-20&linkId=FL7SB4MNOPNE3Y5L The shovel fold-able: http://www.amazon.com/gp/product/B004SOPJG4/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004SOPJG4&linkCode=as2&tag=chri0e2-20&linkId=5QVZTMZAA6XJ2DIS Car snow brush I use: http://www.amazon.com/gp/product/B0016GRTVU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0016GRTVU&linkCode=as2&tag=chri0e2-20&linkId=OQLMHX2H6T2BIC6K Good emergency kit: http://www.amazon.com/gp/product/B00INTQ3YC/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00INTQ3YC&linkCode=as2&tag=chri0e2-20&linkId=DXL6UKCEDHXRW3PV **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

In this video I tested Techron Concentrate Plus by Chevron. I use a mini borescope camera to look into the engine and see how dirty the engine is before the fuel treatment and then after the fuel treatment. I followed the instructions on the container and Techron performed similarly to gumout. This is the third test in a series of fuel cleaner test I will be performing to see how fuel cleaners work and if they actually work. Here is the fuel cleaner I used: http://www.amazon.com/gp/product/B00092893E/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00092893E&linkCode=as2&tag=chri0e2-20&linkId=JHJTJRLDKEROW2YJ Here is the borescope camera I used: http://www.amazon.com/gp/product/B00JERRES6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00JERRES6&linkCode=as2&tag=chri0e2-20&linkId=PWJIOJANWO4OKX7I Royal Purple Max Clean Test: https://www.youtube.com/watch?v=BocH2c4mYcc Gumout Test: https://www.youtube.com/watch?v=5SoZnymBSC8 Seafoam Test in a Car: https://www.youtube.com/watch?v=u6UeJXkzDW8 Seafoam in Lawnmower: https://www.youtube.com/watch?v=WdT4DPFXIkM Lucas Deep Clean Test: https://www.youtube.com/watch?v=FLhXqgEEYyI CleanBoost Maxx Test: https://www.youtube.com/watch?v=VDUogAQzLAc **If the video was helpful, please give it a "thumbs up" and consider subscribing.** Follow me on Facebook: https://www.facebook.com/chrisfix8 Follow me on Twitter: https://twitter.com/ChrisFixed Subscribe: http://www.youtube.com/subscription_center?add_user=paintballoo7 YouTube Channel: https://www.youtube.com/user/PaintballOO7 **New How To videos every Thursday and most Mondays!** Disclaimer: Due to factors beyond the control of ChrisFix, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ChrisFix recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ChrisFix.

Wheel Bearing Replacement, Learn how to replace a wheel bearing hub assembly Fast and Easy!. You do not need to press this bearing in. You can use common hand tools to install it. This video shows a wheel bearing replacement for a Pontiac G8, but it will be similar for most cars and trucks that use hub bearing assemblies. I got a quote of $750 to replace one wheel bearing so doing this yourself saves you a ton of money! How to tell if your wheel bearing is bad: https://www.youtube.com/watch?v=YvKWGjmPKoc How to Replace a Wheel Bearing Hub Assembly (FWD): https://www.youtube.com/watch?v=fe_WtKIKlYA How to Replace a Pressed in Wheel Bearing: https://www.youtube.com/watch?v=fLSXQ_LLpWY Here is the longer, more in-depth version of this video: https://www.youtube.com/watch?v=04AyCYIUEWQ Tools: Slide Hammer: http://www.amazon.com/gp/product/B000I8R7EQ/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000I8R7EQ&linkCode=as2&tag=chri0e2-20&linkId=CCIB22RL5D4MMPUY Socket Set: http://www.amazon.com/gp/product/B000LY5AKU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000LY5AKU&linkCode=as2&tag=chri0e2-20&linkId=PERCTXWXXMI6NSY5 Torque Wrench: http://www.amazon.com/gp/product/B00C5ZL0RU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00C5ZL0RU&linkCode=as2&tag=chri0e2-20&linkId=73AKF7MNIONV37ML Here is the wheel bearing hub assembly I used: http://www.mevotech.com/product/hub-assemblies/ **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how an oil sample taken during an oil change can tell you the condition of the engine in your car. With my Ford, I was curious about the condition of the engine after 300k miles. Are bearings worn? Is there a coolant leak? Is my oil protecting the engine? Sure you can do a compression test, but that only tell you so much. I could have used my borescope camera, but again, you only get so much info. With this oil analysis, you can learn a lot about the condition of your engine. What does the inside of a Fuel Filter look like after 300,000 miles?: https://www.youtube.com/watch?v=92TfTQTmuq4 How to change your oil (COMPLETE GUIDE): https://www.youtube.com/watch?v=O1hF25Cowv8 Here is the Oil Analysis Data Sheet for my Ford Windstar: https://www.dropbox.com/s/zn6lodj7wr6wnor/95%20WINDSTAR.pdf?dl=0 New Car Oil Analysis Video: COMING SOON! Here is where you can get your own oil test kit: http://goo.gl/Q99LT7 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Wheel bearing hub replacement. Learn how to replace a wheel bearing hub assembly. You do not need to press this bearing in. You can use common hand tools to install it. This video shows a wheel bearing replacement for a Pontiac G8, but it will be similar for most cars and trucks that use hub bearing assemblies. I got a quote of $750 to replace one wheel bearing so doing this yourself saves you a ton of money! How to tell if your wheel bearing is bad: https://www.youtube.com/watch?v=YvKWGjmPKoc How to Replace a Wheel Bearing Hub Assembly (FWD): https://www.youtube.com/watch?v=fe_WtKIKlYA How to Replace a Pressed in Wheel Bearing: https://www.youtube.com/watch?v=fLSXQ_LLpWY Tools: Slide Hammer: http://www.amazon.com/gp/product/B000I8R7EQ/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000I8R7EQ&linkCode=as2&tag=chri0e2-20&linkId=CCIB22RL5D4MMPUY Socket Set: http://www.amazon.com/gp/product/B000LY5AKU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000LY5AKU&linkCode=as2&tag=chri0e2-20&linkId=PERCTXWXXMI6NSY5 Torque Wrench: http://www.amazon.com/gp/product/B00C5ZL0RU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00C5ZL0RU&linkCode=as2&tag=chri0e2-20&linkId=73AKF7MNIONV37ML Here is the wheel bearing hub assembly I used: http://www.mevotech.com/product/hub-assemblies/ **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to flush and fill the coolant in your car or truck. Keep your radiator, heater core, and engine clean. Flushing your coolant is good for the cooling system to prevent rust and to prevent your car from overheating. First you drain the old coolant from the radiator, then you fill it with distilled water and coolant flush chemical. Then you run the car. Then you drain the water from the radiator and fill it with 50/50 antifreeze. How to Superflush your Cooling System: https://www.youtube.com/watch?v=s--5ft5YiHg Here is How to Test your Cooling System: https://www.youtube.com/watch?v=mHTM3dvpD1M Here is how to Flush your Heater Core: https://www.youtube.com/watch?v=M9SIafVsqyc **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace rear shock absorbers fast and easy. This job takes 10min each side and saves you a lot of money if you do it yourself! To change the shocks you need a few sockets, a torque wrench, and that is basically it! Here is where I get my inexpensive shocks: http://www.amazon.com/s/?_encoding=UTF8&ajr=2&camp=1789&creative=390957&fst=as%3Aoff&keywords=shock%20absorber&linkCode=ur2&qid=1420485376&rh=n%3A46325011%2Ck%3Ashock%20absorber&rnid=2941120011&tag=chri0e2-20&linkId=EZHIVCP2ZWHBKAQG Here is the ratchet/socket set I was using: http://www.amazon.com/gp/product/B000LY5AKU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000LY5AKU&linkCode=as2&tag=chri0e2-20&linkId=RBWN72RQEQWY67GV Here is a good inexpensive torque wrench: http://www.amazon.com/gp/product/B00C5ZL0RU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00C5ZL0RU&linkCode=as2&tag=chri0e2-20&linkId=2N3ONYFOY4BYGG76 Here is the breaker bar I used: http://www.amazon.com/gp/product/B004HL24ZM/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004HL24ZM&linkCode=as2&tag=chri0e2-20&linkId=X3VADLVEIJWKYNDQ How to replace front shocks: https://www.youtube.com/watch?v=E6dEXhEGoU8 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Shock Absorber Replacement. Learn how to replace rear shock absorbers fast and easy. This job takes 6min each side and saves you a lot of money if you do it yourself! To change the shocks you need a few sockets, a torque wrench, and that is basically it! Watch in real time, with no edits to the video, so you can really get a feel for what is involved! Here is where I get my inexpensive shocks: http://www.amazon.com/s/?_encoding=UTF8&ajr=2&camp=1789&creative=390957&fst=as%3Aoff&keywords=shock%20absorber&linkCode=ur2&qid=1420485376&rh=n%3A46325011%2Ck%3Ashock%20absorber&rnid=2941120011&tag=chri0e2-20&linkId=EZHIVCP2ZWHBKAQG Here is the ratchet/socket set I was using: http://www.amazon.com/gp/product/B000LY5AKU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000LY5AKU&linkCode=as2&tag=chri0e2-20&linkId=RBWN72RQEQWY67GV Here is the more in-depth shock video: https://www.youtube.com/watch?v=D9iUXR1tdO8 How to replace front shocks: https://www.youtube.com/watch?v=E6dEXhEGoU8 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Windshield Chip Repair. Learn how to fix your windshield if it gets a crack or chip for $15. A windshield repair place will charge about $80 to fix the chip and a windshield can cost you over $500 to replace. This short DIY chip repair video will save you time, money, and frustration! Plus you learn something new and useful! Here is where I got the window repair kit: http://www.amazon.com/gp/product/B000EA5WLS/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000EA5WLS&linkCode=as2&tag=chri0e2-20&linkId=XCHDVJLB7UJVVAHB Other Chip Repair Video: https://www.youtube.com/watch?v=QjuWqBzO7qY Large Chip Repair Video: https://www.youtube.com/watch?v=4qMPqlqhPqQ How to Super Clean a Windshield: https://www.youtube.com/watch?v=vJkfrY2owb0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

In this video I tested Seafoam. I use a mini borescope camera to look into the engine and see how dirty the engine is before the fuel treatment and then after the fuel treatment. I followed the instructions on the container and seafoam did a great job cleaning a good amount of carbon off the piston head. I then filled the cylinder with seafoam and it cleaned out 99% of the carbon! After this test, I would recommend seafoam to clean out small engines. I am impressed by the results and finally we have proof that seafoam actually works! Does Seafoam Work in a Car Engine?: https://www.youtube.com/watch?v=u6UeJXkzDW8 Here is the fuel cleaner I used: http://amzn.to/272sWtA Here is the borescope camera I used: http://amzn.to/23x2JyK Royal Purple Max Clean Test: https://www.youtube.com/watch?v=BocH2c4mYcc Gumout Test: https://www.youtube.com/watch?v=5SoZnymBSC8 Seafoam Test in a Car: https://www.youtube.com/watch?v=u6UeJXkzDW8 Techron Test: https://www.youtube.com/watch?v=h8i9qftqKNY Lucas Deep Clean Test: https://www.youtube.com/watch?v=FLhXqgEEYyI CleanBoost Maxx Test: https://www.youtube.com/watch?v=VDUogAQzLAc Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This is the second test for Gumout All in One fuel cleaner to see if it actually removes carbon deposits. I use a mini borescope camera to look into the engine and see how dirty the engine is after the second fuel treatment. Here is the First Video: https://www.youtube.com/watch?v=5SoZnymBSC8 CONCLUSION: I followed the instructions on the container and Gumout fuel cleaner did a great job cleaning the shiny, sludge buildup, but did not work as well as I would have thought on the clumps of hard carbon buildup. Even after two bottles in a row, it did not clean the cylinders as much as I thought it would since they do say one bottle will clean the engine. Here is the fuel cleaner I used: http://www.amazon.com/gp/product/B004AYTRU6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004AYTRU6&linkCode=as2&tag=chri0e2-20&linkId=RR7WMPOEKFYJEVRA Here is the borescope camera I used: http://www.amazon.com/gp/product/B00JERRES6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00JERRES6&linkCode=as2&tag=chri0e2-20&linkId=PWJIOJANWO4OKX7I Gumout Test: https://www.youtube.com/watch?v=5SoZnymBSC8 Seafoam Test in Lawnmower: https://www.youtube.com/watch?v=WdT4DPFXIkM Seafoam Test in a Car: https://www.youtube.com/watch?v=u6UeJXkzDW8 Techron Test: https://www.youtube.com/watch?v=h8i9qftqKNY Lucas Deep Clean Test: https://www.youtube.com/watch?v=FLhXqgEEYyI CleanBoost Maxx Test: https://www.youtube.com/watch?v=VDUogAQzLAc **If the video was helpful, please give it a "thumbs up" and consider subscribing.** Follow me on Facebook: https://www.facebook.com/chrisfix8 Follow me on Twitter: https://twitter.com/ChrisFixed Subscribe: http://www.youtube.com/subscription_center?add_user=paintballoo7 YouTube Channel: https://www.youtube.com/user/PaintballOO7 **New How To videos every Thursday and most Mondays!** Disclaimer: Due to factors beyond the control of ChrisFix, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ChrisFix recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ChrisFix.

Is your heat not working or is your heater not hot? You may have a clogged heater core so do a heater core flush and unclog it. Learn how to flush your heater core and get it working to full capacity again instead of spending hundreds on a replacement! Here is the cheap flush kit I showed: http://amzn.to/2mXrqcx Here is the Thermometer I used: http://amzn.to/2mR5azA Hose adapter: http://amzn.to/2maFdhe AntiFreeze: http://amzn.to/2maOF49 How to find why you have No Heat: https://www.youtube.com/watch?v=-XjXTVJhFLM How to Test your Coolant to See if it is Bad: https://www.youtube.com/watch?v=mHTM3dvpD1M How to Flush Your Coolant: https://www.youtube.com/watch?v=s--5ft5YiHg How to Replace a Blower Motor Resistor: https://www.youtube.com/watch?v=Q-i0tytSYIM How to Replace a Blower Motor: https://www.youtube.com/watch?v=7e60wS3_C9s Here is the longer heater core flush video: https://www.youtube.com/watch?v=LD2LGkUycQg **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to get your windshield super clean! The windows of your car or truck are what you look out of and it is important that they are clean. When you clean the windshield with my method the rain beads up and rolls off the windshield leaving great visibility. Bugs and bird poop come off really easy with one wipe of a towel. Even ice wont stick to the glass so no more scraping ice on those cold days! Here is the glass cleaner I used: http://amzn.to/1VUxj2P Here is the clay bar I used: http://www.amazon.com/gp/product/B0002U2V1Y/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0002U2V1Y&linkCode=as2&tag=chri0e2-20&linkId=H6WL7KF3IC2NA42X Here is the wax I used: http://www.amazon.com/gp/product/B000AP8DZY/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000AP8DZY&linkCode=as2&tag=chri0e2-20&linkId=MS4HBBWOR43ALKUU Inexpensive Microfiber Towels: http://www.amazon.com/gp/product/B00A8MZ7IA/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00A8MZ7IA&linkCode=as2&tag=chri0e2-20&linkId=BLGMEX4JEMJUKM3Q How to clean the INSIDE of the Windshield: https://www.youtube.com/watch?v=axI5Luw0Eos Top 10 Car Cleaning Mistakes: https://www.youtube.com/watch?v=ef_-SNSnByg Here is the original superclean video: https://www.youtube.com/watch?v=p4TBR7TRGJc **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Washer won't spin? Is you Kenmore or Whirlpool Washer Not Spinning or does it make a loud noise when you turn it on? This is commonly caused by the failure of a $2 plastic coupler and the fix is easy. It will take you 10min and you only need a wrench and screw driver. Where to buy the Coupler: http://www.amazon.com/gp/product/B001BADJCE/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B001BADJCE&linkCode=as2&tag=chri0e2-20&linkId=Q444RUEW3AHTJIT6 How to fix a Dryer that doesn't Heat: https://www.youtube.com/watch?v=QP1Z4OWjTuA **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This is the first test in a series of fuel cleaner test I will be performing to see how fuel cleaners work and if they actually work. In this video I tested Gumout "All in one" fuel system cleaner. I use a mini borescope camera to look into the engine and see how dirty the engine is before the fuel treatment and then after the fuel treatment. I followed the instructions on the container and Gumout fuel cleaner did a great job cleaning the shiny, sludge buildup, but did not work as well as I would have thought on the clumps of hard carbon buildup. It did not clean the cylinders as much as I thought it would since they do say one bottle will clean the engine. Here is the fuel cleaner I used: http://www.amazon.com/gp/product/B004AYTRU6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004AYTRU6&linkCode=as2&tag=chri0e2-20&linkId=RR7WMPOEKFYJEVRA Here is the borescope camera I used: http://www.amazon.com/gp/product/B00JERRES6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00JERRES6&linkCode=as2&tag=chri0e2-20&linkId=PWJIOJANWO4OKX7I Here is the follow up video after using the second bottle of Gumout Test: https://www.youtube.com/watch?v=wJSIHGDwMtU Seafoam Test in Lawnmower: https://www.youtube.com/watch?v=WdT4DPFXIkM Seafoam Test in a Car: https://www.youtube.com/watch?v=u6UeJXkzDW8 Techron Test: https://www.youtube.com/watch?v=h8i9qftqKNY Lucas Deep Clean Test: https://www.youtube.com/watch?v=FLhXqgEEYyI CleanBoost Maxx Test: https://www.youtube.com/watch?v=VDUogAQzLAc **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn the main methods for replacing a bad motor mount or bad transmission mount. This will show you how easy of a job changing a motor mount is and all the little tips and tricks! Where to buy inexpensive motor mounts: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=motor%20mounts&linkCode=ur2&sprefix=motor%20mounts%2Caps&tag=chri0e2-20&url=search-alias%3Daps&linkId=ILMPN7MLISM6GHTR How to Diagnose a Bad Motor Mount: https://www.youtube.com/watch?v=ZTRV5GXWpo0 How to Replace a Different Motor Mount: https://www.youtube.com/watch?v=3nV1XSbePT4 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to Know When You Need to Change or Flush Your Coolant. Do you need new antifreeze or a radiator flush? Learn 4 different methods to test your coolant including doing a visual inspection, using a hydrometer to test the freezing point and boiling point, using a multimeter to check the antifreeze, and testing pH. After watching this video you will know if your coolant is still good or if you need to do a coolant flush and fill! The multimeter I used (under $20 here): http://www.amazon.com/gp/product/B001O1X65A/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B001O1X65A&linkCode=as2&tag=chri0e2-20&linkId=DQXKJ44LE7TL32CR The Hydrometer I used ($3): http://www.amazon.com/gp/product/B000BOA9RY/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000BOA9RY&linkCode=as2&tag=chri0e2-20&linkId=T6IACNWTAPOUC33K How to Flush your Heater Core: https://www.youtube.com/watch?v=LD2LGkUycQg How to Fix a Car with No Heat: https://www.youtube.com/watch?v=-XjXTVJhFLM How to Flush and Change Your Coolant: https://www.youtube.com/watch?v=L5pNZ4JHsoY **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Is your heat not working or is your heater not hot? You may have a clogged heater core so do a heater core flush and unclog it. Learn how to flush your heater core and get it working to full capacity again instead of spending hundreds on a replacement! Here is the cheap flush kit I showed: http://amzn.to/2mXrqcx Here is the Thermometer I used: http://amzn.to/2mR5azA Hose adapter: http://amzn.to/2maFdhe AntiFreeze: http://amzn.to/2maOF49 How to find why you have No Heat: https://www.youtube.com/watch?v=-XjXTVJhFLM How to Test your Coolant to See if it is Bad: https://www.youtube.com/watch?v=mHTM3dvpD1M How to Flush Your Coolant: https://www.youtube.com/watch?v=s--5ft5YiHg How to Replace a Blower Motor Resistor: https://www.youtube.com/watch?v=Q-i0tytSYIM How to Replace a Blower Motor: https://www.youtube.com/watch?v=7e60wS3_C9s **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Control Arm Bushing Replacement. This video will show you how to easily replace Upper Control Arm bushings (press the old ones out and press the new ones in with common tools). This job is fast and easy and can be done with basic hand tools and a ball joint or bushing press which you can rent for free at your local parts store. You can also use this method to replace bushings in your leaf springs and pretty much anything that has pressed in bushings! Get inexpensive bushings here: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=control%20arm%20bushings&linkCode=ur2&rh=i%3Aaps%2Ck%3Acontrol%20arm%20bushings&tag=chri0e2-20&url=search-alias%3Daps&linkId=NIGGY4IUR24UWIAR Here is the press kit I used (and I really like): http://www.amazon.com/gp/product/B0028QGT86/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0028QGT86&linkCode=as2&tag=chri0e2-20&linkId=HAPDN7JU74P4IVHK How to Press a Ball Joint: https://www.youtube.com/watch?v=37NgLM4tIzw How to Replace a Chevy Upper Control Arm: https://www.youtube.com/watch?v=aPbL9HTHZg0 How to Replace a Ford Upper Control Arm: https://www.youtube.com/watch?v=v7bOxQe_WhU How to Replace a Lower Control Arm: https://www.youtube.com/watch?v=CmN2dRAiuj0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

No heat in your car? Car not blowing hot air? This video will show you how to fix your car's heater whether it is your heater core, heater control valve, blend door, or blower motor resistor, I go though each step to find your problem so you wont be driving in the cold anymore! How to Flush a Heater Core: https://www.youtube.com/watch?v=LD2LGkUycQg How to Test your Coolant to See if it is Bad: https://www.youtube.com/watch?v=mHTM3dvpD1M How to Flush Your Coolant: https://www.youtube.com/watch?v=s--5ft5YiHg How to Replace a Blower Motor Resistor: https://www.youtube.com/watch?v=Q-i0tytSYIM How to Replace a Blower Motor: https://www.youtube.com/watch?v=7e60wS3_C9s **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

The Tire Pressure Monitoring system light will let you know when your tire pressure is low and when your sensors are malfunctioning. In this video I show you how to find the correct tire pressure (door sill sticker), find the low tire, inflate the tire, and also inspect all of the tires. For every 10°F the pressure will change 1psi and in this case, Fall has a large change in temperature and it triggered the TPMS light. If the low tire pressure light is flashing, this is usually due to low batteries. The batteries should last from 5-7 years or around 100,000 miles. Unfortunately the only way to replace these batteries is to take the tire off the rim. In 2005 the US governemnt told the car companies to get ready to have all their cars include a standard TPMS and in 2007 it was required for every new car to have TPMS Here is a link to the awesome tire pressure gauge I used: http://www.amazon.com/gp/product/B015QTPJ3W/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B015QTPJ3W&linkCode=as2&tag=chri0e2-20&linkId=WKPWEXKJII5OSMSB **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Aiming your headlamps or adjusting your headlamps so the beams are in the correct spot is important for visibility and so you do not blind other drivers. This video shows you how to properly align headlights so that you get the maximum lighting yet you wont blind other drivers. Using the headlight adjustment screws and a wall you I give you the correct beam distances that apply to almost every make and model! Here is a specialized tool you can use to turn the adjuster screws: http://www.amazon.com/gp/product/B0002SR8AK/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0002SR8AK&linkCode=as2&tag=chri0e2-20&linkId=XM5TRXSYUIHR6TH3 How to Restore Headlights Permanently: https://www.youtube.com/watch?v=UEJbKLZ7RmM **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to replace headlights. Do you need new headlamps? When you cannot restore your headlights it is time for new ones. With my pickup truck, I show how easy it is to replace the headlight and how great they look! Wait until the end so you can see the amazing before and after shots of the light output! How to Aim Headlights: https://www.youtube.com/watch?v=qDudMM4J-ZE How to Restore Headlights Permanently: https://www.youtube.com/watch?v=UEJbKLZ7RmM **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Tail Light Restoration using Clear Coat. This video will show you how to clean and restore your taillights so they will never turn yellow or hazy again! You have seen videos on restoring headlights with bug spray, toothpaste, baking soda, and the kits you buy in the store, but all of these methods are temporary and eventually the haze and oxidation will come back. My method will first make the brake light clear by wet sanding and then put a UV coat on it to seal it in. Clear coat I used: http://www.amazon.com/gp/product/B00KZ6LYMM/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00KZ6LYMM&linkCode=as2&tag=chri0e2-20&linkId=Z3U77RN3DHFZ2PXB How to Restore Headlights PERMANENTLY: https://www.youtube.com/watch?v=UEJbKLZ7RmM Using Bug Spray to Clean Headlights (WARNING!!!): https://www.youtube.com/watch?v=AYmbBZntuY8 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Ever wonder what the inside of your engine looks like? How about what a head gasket failure, an overheating motor, or a melted piston looks like? In this video I go deep inside an engine using a bore scope (endoscope) to look through the spark plug hole in my Chrysler PT Cruiser with a blown engine. Stay tuned till the end because I show you the inside of a cylinder in my Chevy Corvette, Mercury Milan, and a Craftsman Lawnmower. Here is a link to the bore scope: http://www.amazon.com/gp/product/B00JERRES6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00JERRES6&linkCode=as2&tag=chri0e2-20&linkId=IK3Y2SYFURYMBGXQ The engine had a small head gasket leak and needed some coolant every month, but nothing serious. Then one day on the highway, it overheated and by the time the driver pulled off the road, the engine blew up. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Take apart your headlight lenses without an oven. Learn how to safely remove your headlamp or fog light lens without an oven. I show you an easy method to take apart the lens and put it back together so there will be no problems with melting the lens or moisture after you put it back together. -I made my own oven out of a box, tin foil, thermometer, and a heat gun. This worked great and is reusable. -You might want to do this if you want to spray paint the inside of your headlight, retrofit projector lenses for HIDs or LEDs, to clean the inside of the lens, etc. Sealant for your headlight to re-seal it: http://amzn.to/1DjRPpk Below is the long list of car makes, models, and years with the corresponding headlight glue type and temperatures (click the link to the pdf). Most butyl glue headlights will separate at 250F for 8-10min. Headlight Temperature List: https://www.dropbox.com/s/xi6tu14ixk4rcok/Headlight%20Lens%20Removal%20List.pdf?dl=0 How to Remove and Seal Moisture From Your Headlight: https://www.youtube.com/watch?v=KNWTidkxcmQ How to Restore Your Headlight Permanently: https://www.youtube.com/watch?v=UEJbKLZ7RmM **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

License plate light replacement. LED light bulbs for your license plate gives your car or truck a modern look with the white light output. It is also slightly brighter which improves the look of your car. Replacing the license plate light is easy to do and way worth it. I purchased a pack of 8 LEDs for $5. Benefits for using LEDs: -longer bulb life (50,000hrs) -uses less power -daylight color temperature (white) LED License Plate Bulbs (better ones): http://amzn.to/1OZlD9u Project Night Light (LED Light Bar): https://www.youtube.com/watch?v=qp9L00SMSHQ How to Wire Auxiliary Reverse Lights: https://www.youtube.com/watch?v=ZVG7X-ae298 How to Remove Headlight Moisture: https://www.youtube.com/watch?v=KNWTidkxcmQ How to Install LED Truck Bed Lights: COMING SOON **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Upper Ball Joint Replacement. This video will show you how to replace the Upper Control Arm Ball Joint on a Chevy Trailblazer, GMC Envoy, etc. Replacing a ball joint is fast and easy and can be done with basic hand tools and a ball joint press you can rent for free at your local parts store. This ball joint is pressed but some are bolt on which is even easier. Tools Used: 35mm Axle Nut Socket: http://www.amazon.com/gp/product/B002O173L2/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B002O173L2&linkCode=as2&tag=chri0e2-20&linkId=WJKI3QQGOJ55QVO3 Ball Joint Press: http://www.amazon.com/gp/product/B0028QGT7W/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0028QGT7W&linkCode=as2&tag=chri0e2-20&linkId=T6PNPXYW4KQB5FLS Torque Wrench I use: http://amzn.to/1N65Maz Socket Set I use: http://amzn.to/1BlL0Tj How to Press a Ball Joint: https://www.youtube.com/watch?v=37NgLM4tIzw How to Tell if a Ball Joint is Bad: https://www.youtube.com/watch?v=62bVn7E8gyk How to Replace Upper Control Arm (Trailblazer): https://www.youtube.com/watch?v=wZGr8Xf2ip8 How to Replace a Ford Upper Control Arm: https://www.youtube.com/watch?v=v7bOxQe_WhU The Part Website: http://www.mevotech.com/product/supreme-chassis-ball-joints **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Headlight Restoration using Clear Coat. This video will show you how to clean and restore your headlights so they will never turn yellow or hazy again! You have seen videos on restoring headlights with bug spray, toothpaste, baking soda, and the kits you buy in the store, but all of these methods are temporary and eventually the haze and oxidation will come back. My method will first make the headlight clear by wet sanding and then put a UV coat on it to seal it in. Headlight Clarity Updates: 1yr Later: https://instagram.com/p/8iyExTOjFm/ 2yrs later: https://www.instagram.com/p/BC7Ov-zOjLe/?taken-by=chrisfixit New longer lasting clear coat: https://amzn.to/2JU2Fap Clear Coat I used: http://amzn.to/1RiHCcw 2000 grit sandpaper: http://amzn.to/1XqDuhG Wax: http://amzn.to/1cxIXj0 Compound polish to remove orange peel: http://amzn.to/1TtfoOC Rubbing Alcohol to Clean Lens: http://amzn.to/1NFOVQY Using Bug Spray to Clean Headlights (WARNING!!!): https://www.youtube.com/watch?v=AYmbBZntuY8&list=PLDD611CFB36FC65F2 How to use Toothpaste to Clean Headlights: https://www.youtube.com/watch?v=rXHTXdlWw1w&list=PLDD611CFB36FC65F2 How to Remove Moisture from Headlights: https://www.youtube.com/watch?v=KNWTidkxcmQ&list=PLDD611CFB36FC65F2 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Control Arm Bushing Replacement. This video will show you how to easily replace Upper Control Arm bushings (press the old ones out and press the new ones in with common tools). This job is fast and easy and can be done with basic hand tools and a ball joint or bushing press which you can rent for free at your local parts store. You can also use this method to replace bushings in your leaf springs and pretty much anything that has pressed in bushings! Get inexpensive bushings here: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=control%20arm%20bushings&linkCode=ur2&rh=i%3Aaps%2Ck%3Acontrol%20arm%20bushings&tag=chri0e2-20&url=search-alias%3Daps&linkId=NIGGY4IUR24UWIAR Here is the press kit I was using (and I like a lot): http://www.amazon.com/gp/product/B0028QGT86/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0028QGT86&linkCode=as2&tag=chri0e2-20&linkId=HAPDN7JU74P4IVHK How to Press a Ball Joint: https://www.youtube.com/watch?v=37NgLM4tIzw How to Replace a Chevy Upper Control Arm: https://www.youtube.com/watch?v=aPbL9HTHZg0 How to Replace a Ford Upper Control Arm: https://www.youtube.com/watch?v=v7bOxQe_WhU How to Replace a Lower Control Arm: https://www.youtube.com/watch?v=CmN2dRAiuj0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Upper Control Arm Replacement. Learn how to replace the Upper Control Arm on a Chevy Trailblazer, GMC Envoy, etc. Replacing an upper control tarm is pretty straight forward and This job is fast/easy and can be done with basic hand tools. How to Replace Sway Bar End Links (Trailblazer): https://www.youtube.com/watch?v=YqOsW1X1-O8 How to Replace Upper Ball Joint (Trailblazer): https://www.youtube.com/watch?v=l3SJwitttwo How to Replace a Ford Upper Control Arm: https://www.youtube.com/watch?v=v7bOxQe_WhU The Part Website: http://www.mevotech.com/product/control-arms/ **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Want Bright Back Up Lights? Rig up your auxiliary lights to come on when you go in reverse. I show you the step by step process of how I wired my truck with a relay so when I put the truck in reverse, the LED reverse lights come on with the stock reverse lights. Where to get the lights I used: http://www.amazon.com/gp/product/B00GGOEH5I/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00GGOEH5I&linkCode=as2&tag=chri0e2-20&linkId=65QV6WTIPSXEQWV5 Where to get the relay I used: http://www.amazon.com/gp/product/B00C0SATHE/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00C0SATHE&linkCode=as2&tag=chri0e2-20&linkId=V7CJK67FFNV5235B Automatic Wire Stripper: http://www.amazon.com/gp/product/B000IYTCG6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000IYTCG6&linkCode=as2&tag=chri0e2-20&linkId=IB2375WQHGF3DP2U Baja Designs Squadron XL LED Light Review: https://www.youtube.com/watch?v=f1yaj00AnUU How a Relay Works: COMING SOON! How to Wire Truck Bed Lights: COMING SOON! **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to take off a car wheel. One of the most fundamental parts of working on a car is properly and safely taking the wheel off and putting it back on. I will go over the process in-depth for beginners and provide tips and tricks to safely remove the wheel and to correctly put it back on. If you have never removed a wheel before, this video is just for you. Even if you are an expert, I go over some tips and tricks that I use to make things easier. Here is a good starter torque wrench: http://www.amazon.com/gp/product/B00C5ZL0RU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00C5ZL0RU&linkCode=as2&tag=chri0e2-20&linkId=PF3GKJSQUU2JNQ3C Here is a great jack to make lifting your car easy: http://www.amazon.com/gp/product/B00P4CF27K/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00P4CF27K&linkCode=as2&tag=chri0e2-20&linkId=CSXDO5E3M4M22PNG How to Change Your Oil: https://www.youtube.com/watch?v=rYWcL76WMRg How to get Better MPGs: https://www.youtube.com/watch?v=gRfaPfTcfOM Top 10 Car Cleaning Mistakes: https://www.youtube.com/watch?v=ef_-SNSnByg **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Bug spray headlight restoration. This is a video to show you how bug spray with DEET, can clean and restore headlights by removing oxidation, haze, and yellowing plastic. Hopefully this clears things up and shows you the truth behind using bug spray to restore headlights! The problem with the bug spray is that it doesnt last and it will damage your headlights and can damage your paint and trim. I go into why the OFF Deep Woods bug spray works, how it can damage your paint, and if you do want to try it, how to apply it to reduce the chances of any damage. I do not recommend using this method to clear up your headlights, instead I recommend using toothpaste which will not damage your headlights or the surrounding trim/paint. Here is the BEST method to use to make your headlights permanently clear! https://www.youtube.com/watch?v=UEJbKLZ7RmM Here is how to use Toothpaste to get the same results: https://www.youtube.com/watch?v=rXHTXdlWw1w How to get your headlights SUPER CLEAR (Using Sandpaper): https://www.youtube.com/watch?v=lrlIhRea8u8 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Smaller than a LED Light Bar, The Baja Designs, Squadron XL lights are the best small package off road lights I could find while doing my research. If you watch my video review you will see how bright they are and how many features it has which made it a clear pick in my book. I wanted reverse lights for backing down the trail, backing down a boat ramp or even backing down the driveway at night. Here is where to get the lights: http://www.amazon.com/gp/product/B00GGOEH5I/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00GGOEH5I&linkCode=as2&tag=chri0e2-20&linkId=65QV6WTIPSXEQWV5 How to Install the Lights: https://www.youtube.com/watch?v=ZVG7X-ae298 Some Facts Lumens: 4300 LEDs: 4 Cree XM-L2 T6 Bin LEDs Wattage/Amps: 42W / 3.5A Weight: 2.45 lbs LED Life Expectancy: 49,930 Hours (5.6yrs) -Built-in Reverse Battery & Transient Voltage Suppressor Protection Front Lens: Hardcoated Polycarbonate Housing: Extruded Aluminum, Anodized -Exceeds MIL-STD810G (Mil-Spec Testing) -IP69K (Waterproof, Submersible to 9ft) -IK10 Compliant (Mechanical Impact Testing) -3 interchangeable lenses -5000k Color Temperature Satisfactions Guarantee – 30 day money back guarantee Limited Lifetime Warranty – Complete Purchase Protection Coupon Code for a 10% Discount on any of their products: BD10OFF **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Paint your brake calipers to keep them looking good and rust free. This video will give you the outline of what you would need to do to paint your own brake calipers. I go over the tools and supplies you will need, the different steps it will take to get a good finish and you can see what the results look like. Here is the spray paint I used (It comes in other colors too): http://www.amazon.com/gp/product/B003CT4AKC/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B003CT4AKC&linkCode=as2&tag=chri0e2-20&linkId=PEV46MBCYCBOJ4CK Paint Your Brake Drums: https://www.youtube.com/watch?v=djmDciOIuls How to change Front and Rear Brake Pads and Rotors: https://www.youtube.com/watch?v=lU6OKQxSg8U How to bleed/flush your Brakes: https://www.youtube.com/watch?v=n1NvtUwfRJc Paint Your Brakes: https://www.youtube.com/watch?v=djmDciOIuls Drum Brake Replacement: https://www.youtube.com/watch?v=zJ_UXP6GWkwWheel Cylinder Replacement: https://www.youtube.com/watch?v=GIWYkCOPAQ0Chrysler How to Replace a Brake Caliper: https://www.youtube.com/watch?v=nbdJGCi29nQ **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

The Go2 Socket goes on a ratchet like a socket, it changes sizes like a crescent wrench, and it clamps down like a vise. It will grip rounded bolts, nuts, and even studs. Pretty much anything that fits in the cavity it will grip on. I even used it to loosen up a broken oxygen sensor that was completely stripped! This is a great tool to save you when you encounter a rounded nut or bolt! It will pay for itself the first time you use it! Here is where to get one: http://amzn.to/293j4pG The 3 Winners Are: 1.) Chipper M 2.) Fordwindsor351 3.) tspugsley39 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to Install Brake Rotors and Pads. Learn how to replace your brake pads and rotors on your car. Most cars will be similar to this Ford Ranger and after watching this you will be able to change your own brakes and save hundreds of dollars . Here is the paint I used in the video: http://amzn.to/1Uabmgg Torque Wrench I use: http://amzn.to/1N65Maz Socket Set I use: http://amzn.to/1BlL0Tj Silicone for Guide Pins: http://amzn.to/1sNuJTV Brake Clean: http://amzn.to/1Vgbo8F Antisieze: http://amzn.to/2ao6TXJ Thread Lock: http://amzn.to/2ab89PT How to change Front and Rear Brake Pads and Rotors: https://www.youtube.com/watch?v=lU6OKQxSg8U How to bleed/flush your Brakes: https://www.youtube.com/watch?v=n1NvtUwfRJc Paint Your Brakes: https://www.youtube.com/watch?v=djmDciOIuls Drum Brake Replacement: https://www.youtube.com/watch?v=zJ_UXP6GWkwWheel Cylinder Replacement: https://www.youtube.com/watch?v=GIWYkCOPAQ0Chrysler How to Replace a Brake Caliper: https://www.youtube.com/watch?v=nbdJGCi29nQ Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to install a brake caliper. Learn how to change your brake caliper correctly and safely. Learn the process of taking them off, the correct torquing procedure, the correct banjo bolt installation, the correct bleeding process, and all the tips and tricks that go along with the replacement. The Socket Set I use: http://www.amazon.com/gp/product/B000LY5AKU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000LY5AKU&linkCode=as2&tag=chri0e2-20&linkId=TCH3GNCZYZFE7FVD Torque wrench I use: http://www.amazon.com/gp/product/B00C5ZL0RU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00C5ZL0RU&linkCode=as2&tag=chri0e2-20&linkId=BX7Q2I5EMF3RYZ3H Top 10 Brake Job Tips: https://www.youtube.com/watch?v=xJDOuZzEAQc How to change Front and Rear Brake Pads and Rotors: https://www.youtube.com/watch?v=lU6OKQxSg8U How to bleed/flush your Brakes: https://www.youtube.com/watch?v=n1NvtUwfRJc Paint Your Brakes: https://www.youtube.com/watch?v=djmDciOIuls Drum Brake Replacement: https://www.youtube.com/watch?v=zJ_UXP6GWkw Wheel Cylinder Replacement: https://www.youtube.com/watch?v=GIWYkCOPAQ0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Coax cable stripping. Learn how to strip a coax cable for TV. I use a RG6, twist on F connector rather than a crimp on f connector so there are no special tools. This is for my Fios Cable TV and it works great! **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Toyota Door Panel Removal and lock fix. Learn step-by-step, how to remove the door panel from a Toyota RAV4. I show you all of the tricks so you dont break anything or damage the door in the removal process. I also show you how to fix the common problem where the door key lock doesn't work. How to make your headlight look new again: https://www.youtube.com/watch?v=rXHTXdlWw1w Trailblazer Door Panel Removal: https://www.youtube.com/watch?v=8GUP0kYkSao Toyota RAV4 P1135 and P1155 Fix (Air Fuel Ratio Sensor) https://www.youtube.com/watch?v=_Kr-c8eBl5E **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Quiet a loud blower motor. If your interior AC/ Heat fan (blower motor) is making noise like a card in a bicycle spoke, then you probably just need to clean out the blower motor which is easy and free. Leaves and debris gets in the blower motor and make a clicking noise when the fan hits the leaves. I will also show you how to clean the Evaporator to get cooler AC and get rid of any smells you might have coming from your fan. This video will also show you how to replace a blower motor. How to replace a blower motor resistor: https://www.youtube.com/watch?v=Q-i0tytSYIM How to Diagnose Blower Motor (HVAC) problems: COMING SOON **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to fix a fan that doesn't work on low. If your interior AC/ Heat fan is not working on low, or one of the fan settings isnt working, then you probably need to replace the blower motor resistor. This video will go though all of the steps and give you some helpful tips and tricks! I also show the blower motor resistor wiring diagram in case you need to put a new pigtail on the resistor (like I did because it melted). Inexpensive blower motor resistors: http://amzn.to/2ax82ww How to fix a noisy blower motor: https://www.youtube.com/watch?v=7e60wS3_C9s&list=PLDD611CFB36FC65F2 How to Diagnose Blower Motor (HVAC) problems: https://www.youtube.com/watch?v=-XjXTVJhFLM&list=PLDD611CFB36FC65F2 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Wet tires shine. With Turtle Wax Jet Black Endura-shine Tire Coat you can make your tires look wet like you just washed your car for a whole year! The coating is a black tinted acrylic that covers brown or faded tires and makes it look like you just washed it. I would recommend this product to a friend and I will personally be using this over any of the other silicone based products on the market. New Tire Shine (since one in video is discontinued): http://amzn.to/2rlXmY7 Tire shine I used: http://amzn.to/1r5D3g0 Hose Nozzel: http://amzn.to/1Ujv9HL How to make your headlights clear again: https://www.youtube.com/watch?v=rXHTXdlWw1w *Month - How the tire shine is holding up* August- the tire still looks wet September- the tire still looks wet October- the tire still looks wet, but it is about 90% as shiny as it was when it was first applied November- still at 90% and looking good surprisingly December- at about 85% and I just went offroading again with the tires spinning in mud! January- it dulled a lot and is at about 50% but the tire still looks "clean" just not as shiny February- you can still see it but it is not really shiny anymore March- it is still on there, but I really need to add another coat because it is pretty dull (but looks good when cleaned) April- pretty much no evidence of the tire shine anymore May- pretty much no evidence of the tire shine anymore **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Moisture in headlight or fog light? Learn how to remove condensation and moisture from your headlight or fog light. Find the leak, seal it, and prevent water and moisture from getting back into your headlamp. Moisture can cause your headlight bulb to blow out and reduce light output. Headlight Restoration with Toothpaste: https://www.youtube.com/watch?v=rXHTXdlWw1w Headlight Bulb Install Tips and Tricks: https://www.youtube.com/watch?v=HO3IXM3XkUU Restore your Headlights Permanently: https://www.youtube.com/watch?v=UEJbKLZ7RmM How to Deparate your Headlight Lens: https://www.youtube.com/watch?v=TXvBkHlwDgA **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to clean a Mass Airflow Sensor. Mass Airflow Sensor cleaning can increase fuel economy, stop hesitation and stalling, and shut off your check engine light. This is a simple procedure and in this video I go in-depth about cleaning the sensor and I take readings from an OBDII scanner to show before and after cleaning the sensor. A mass airflow sensor gets dirty because of oiled filters such as a KNN air filter, air filters that are not replaced often enough, and dusty roads (salt, sand, pollen, etc). Symptoms of a dirty MAF sensor are hesitation, poor idle, bad fuel economy, and stalling. You can also get a check engine light with codes P0100, P0102, P0103, P0104, and P0105. Bluedriver Scanner I used: http://amzn.to/1XNUGfz Mass Airflow Cleaner: http://amzn.to/1po5AxE Average Fuel Economy for the month before I cleaned the sensor: 17.5mpg 1 fill-up later: 18.97mpg 2 fill-ups later: 20.86mpg 3 fill-ups later: 19.10mpg 4 fill-ups later: 20.1mpg 5 fill-ups later: 19.13mpg Cleaning a MAF to stop Hesitation and Stalling: COMING SOON How to Fix a Car that Idles Poorly: https://www.youtube.com/watch?v=vFhoNykgQtc How to Replace Oxygen Sensors: https://www.youtube.com/watch?v=_Kr-c8eBl5E Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace a side mirror and remove the door panel on a This video will show you all of the steps so you don't break anything and can change your side view mirror or whatever else you need to fix inside your door panel such as a window regulator. Trailblazer Headlight Bulb Replacement: https://www.youtube.com/watch?v=OMYHemqSQyQ Rear Differential Fluid Replacement: https://www.youtube.com/watch?v=KmqMUJb-E4M Disc Brake Rotor and Pad Replacement: https://www.youtube.com/watch?v=eYfY-AIC_WI How to Check Your Suspension: https://www.youtube.com/watch?v=FOk0tkGEWmA **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

When changing out your control arms it is very important to install your control arms correctly. It is an easy enough job, but doing it incorrectly can leave you with a control arm that wears out quickly. When you install the control arm and bolt it down to the car's frame, you should keep the bolts to the frame loose, put the tires on, put the car on the ground, and then torque down the bolts to the correct torque with the car on the ground. This will set the proper pre-load. How to Replace an Upper Control Arm: https://www.youtube.com/watch?v=v7bOxQe_WhU How to Replace a Lower Control Arm: https://www.youtube.com/watch?v=CmN2dRAiuj0 Camber Bolt Installation: https://www.youtube.com/watch?v=OsizWChLOQw How to Replace a Ball Joint: https://www.youtube.com/watch?v=ZztbAShnlxw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Sway bar link replacement ford explorer. Learn how to replace the sway bar end links on a Ford Ranger, Ford Mustang, Mazda B series truck, Ford Explorer, Ford Taurus, Ford F150, Dodge Ram, Chevy Silverado, and many other vehicles. There are two main types of sway bar end links, and this is one of them. Below is a link to a video on how to replace the other style. Different Style Sway Bar End Link Replacement: https://www.youtube.com/watch?v=YqOsW1X1-O8 How to tell if your Sway Bar Bushings and End Links are Worn: COMING OUT SOON How to Replace a Ball Joint: https://www.youtube.com/watch?v=ZztbAShnlxw Where I get inexpensive sway bar end links: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=sway%20bar%20end%20links%20moog&linkCode=ur2&rh=n%3A228013%2Ck%3Asway%20bar%20end%20links%20moog&tag=chri0e2-20&url=search-alias%3Dtools&linkId=6TWTB5SJ73XRA7P4 and bushings: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=sway%20bar%20bushings&linkCode=ur2&tag=chri0e2-20&url=search-alias%3Dtools&linkId=HUVXS7Z35QYW5RWW Socket set I use: http://www.amazon.com/gp/product/B000LY5AKU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000LY5AKU&linkCode=as2&tag=chri0e2-20&linkId=2PTRJQ3K3VMZ2UX6 Cutoff Wheel I use: http://www.amazon.com/gp/product/B0064UQO8M/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0064UQO8M&linkCode=as2&tag=chri0e2-20&linkId=6BOTBK737OWHM6FN **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Best Penetrating Oil. Learn how to make your own homemade penetrating fluid that works better than WD40, Liquid Wrench, PB Blaster, Kroil, and most other penetrating fluids on the market. Not only does it work better, it is way cheaper to make and very easy to make. You just need Automatic Transmission Fluid and Acetone and mix them together in a 50/50 ratio. Fill-able oil container: http://amzn.to/29Pbwgy Another fillable container (different style): http://amzn.to/1JcTRIc Acetone: https://amzn.to/2yluM0A Synthetic Transmission fluid: http://amzn.to/29Qcer0 How to Make a One Person Brake Bleeder: https://www.youtube.com/watch?v=1wwq1Vlk4Wg How to Fix a bumper with zip ties: https://www.youtube.com/watch?v=M6hlVoX0B_k **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to bleed brakes using the one person method. Learn how to make your own one person brake bleeder using a plastic bottle and a clear hose for under $5. With this one person brake bleeder you can bleed or flush your brakes completely by yourself and you wont get any air in the system. Here is the tubing you need for the brake bleeder: http://amzn.to/1RQyTyF How to Flush Your Brake Fluid COMPLETELY: https://www.youtube.com/watch?v=n1NvtUwfRJc Wheel Cylinder Replacement: https://www.youtube.com/watch?v=GIWYkCOPAQ0 How to Replace Drum Brakes: https://www.youtube.com/watch?v=zJ_UXP6GWkw Everything you Need to Know About Brake Fluid: COMING SOON **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to Do a Brake Fluid Flush. Learn how to do a complete brake system flush to remove all of the old, water logged brake fluid out and replace it with fresh new DOT 3 brake fluid. I show you the two person method and the one person method to bleed the brakes. I also show you how to bleed drum brakes and disc brakes as well as the correct order to bleed them for a complete flush. Here is the tubing you need for the brake bleeder: http://amzn.to/1RQyTyF One Person Brake Bleeder: https://www.youtube.com/watch?v=1wwq1Vlk4Wg Everything you Need to Know About Brake Fluid: COMING SOON Wheel Cylinder Replacement: https://www.youtube.com/watch?v=GIWYkCOPAQ0 How to Replace Drum Brakes: https://www.youtube.com/watch?v=zJ_UXP6GWkw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Sway bar link replacement. Learn how to replace the sway bar end links aka drop links, on a Chevy Trailblazer, GMC Envoy, Buick Rainier, Saab 9-7X, Oldsmobile Bravada, Isuzu Ascender. This job is fast and easy. The stabilizer links I install are greasable which is great (and not common). So lets go replace worn sway bar end links. Trailblazer Ball Joint Replacement: https://www.youtube.com/watch?v=l3SJwitttwo Trailblazer Upper Control Arm Replacement: https://www.youtube.com/watch?v=wZGr8Xf2ip8 Different Style Sway Bar End Link Replacement (Ford Ranger): https://www.youtube.com/watch?v=VnrARhxhaSo The Part Website: http://www.mevotech.com/product/stabilizer-links/ **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Car Horn Doesn't Work? This video will show you how to test and replace a car horn. I show you how to check which horn, high or low, is bad using a multimeter. Trailblazer Headlights: https://www.youtube.com/watch?v=OMYHemqSQyQ Trailblazer Brakes: https://www.youtube.com/watch?v=FOk0tkGEWmA Trailblazer Sway Bar End Links: https://www.youtube.com/watch?v=YqOsW1X1-O8 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to check ball joints and ball joint noise. Learn how to diagnose a bad ball joint for both an upper and lower control arm. I also quickly show you how to tell if it is a bad tie rod, bushings, or a bad bearing just in case your ball joint is not bad. A bad ball joint will make noise which is the first symptom of knowing it's bad. How to Replace a Ball Joint: https://www.youtube.com/watch?v=E9O_cOB2MTI Cutaway of a Ball Joint: https://www.youtube.com/watch?v=04DJ1R5cSy4 How to Tell if your Tie Rod is BAD: https://www.youtube.com/watch?v=brI2feYiEi8 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Ball Joint Replacement. Ever wonder what the inside of a ball joint looks like? Well here is your chance to see a ball joint cutaway. Ball joints are what connect your control arms to the knuckle and it keeps the tire on the car. Bad ball joints can cause your tire to fall off while you are driving! A ball joint needs to be able to move in multiple directions as your car's suspension is moving up and down and left and right. How to Replace a Ball Joint: https://www.youtube.com/watch?v=E9O_cOB2MTI Cutaway of a Tie Rod: https://www.youtube.com/watch?v=3RjhtVse6jE How to Tell if your Ball Joint is Bad: https://www.youtube.com/watch?v=62bVn7E8gyk **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Car Cleaning Tips. Here are my Top 10 mistakes I see people make while cleaning their car. As you watch this you will realize one of the main things you want to do when cleaning your car is prevent scratches. Comment below if you have any other mistakes you see people do. I would love to hear and share them! How to SuperClean you Car: https://www.youtube.com/watch?v=CFXfSBR5Q9w&list=PLvKbarVtwhUs7sIm9Hc9VgANltYl8_DwC Top 10 Mistakes Car Owners Make: https://www.youtube.com/watch?v=gkn-K2noClw&list=LLes1EvRjcKU4sY_UEavndBw Wax I use: http://amzn.to/1U7kT4Y Microfiber towels I use: http://amzn.to/1TsJHdu Microfiber Wash Mit: http://amzn.to/20t6a94 Car Soap I use: http://amzn.to/20t5UqQ Hose nozzle I use: http://amzn.to/20t6V22 Rim Cleaner I use: http://amzn.to/1TA1UCP Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Fix a loose column shifter on ford vehicles. This video will show you how to fix your loose column shifter for an automatic car, specifically a Ford, Mazda, Lincoln, or Mercury. A loose shifter can prevent your car from starting because you cant get into Park or Neutral. It can also leave you stranded by not allowing you to get into Reverse or Drive. I will show you how to identify the problem, tighten the bolts and prevent the problem from occurring again in the future. How to Align your Car's Shift Indicator: https://www.youtube.com/watch?v=wzhUYwx34gM Get back lost power from your Ford, Lincoln, Mercury, or Mazda: https://www.youtube.com/watch?v=j0YGvWxO6tw How to fix a Multifunction Switch: https://www.youtube.com/watch?v=Lj1lNnxuGEo **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Shift Indicator Repair. This video will show you how to align the PRND indicator for an automatic car, specifically a Ford, Mazda, Lincoln, or Mercury. I will show you how to identify the problem, fix the broken piece, adjust the gear so that the indicator lines up with the letters on the dash. Here is the plastic replacement piece: http://amzn.to/1QC7qol How to Fix a Loose Column Shifter: https://www.youtube.com/watch?v=LKqiDy_Po2M Get back lost power from your Ford, Lincoln, Mercury, or Mazda: https://www.youtube.com/watch?v=j0YGvWxO6tw How to fix a Multifunction Switch: https://www.youtube.com/watch?v=Lj1lNnxuGEo Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to make a knife. Learn from start to finish, how to make your own chef's knife. I start with a piece of 01 tool steel and finish with a great looking, durable, and functional chef's knife. Here is where you can get the metal: http://www.amazon.com/gp/product/B00CZDPAI2/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00CZDPAI2&linkCode=as2&tag=chri0e2-20&linkId=PJ2AEETAVC2VBPJN **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Using toothpaste for headlight restoration. Learn how to clean headlights with toothpaste and restore yellow headlights so they are clear again. Headlight lens restoration using regular toothpaste actually works. It doesn't take much effort, and you can get great results. Watch to see how to get your ugly headlights clear again! How to get your headlights SUPER CLEAR: https://www.youtube.com/watch?v=lrlIhRea8u8 Permanent Headlight Restoration: https://www.youtube.com/watch?v=UEJbKLZ7RmM Here is the wax I used: http://www.amazon.com/gp/product/B004HCS4PK/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004HCS4PK&linkCode=as2&tag=chri0e2-20&linkId=54C27CHB7HOUBM36 Here is the toothpaste I used: http://www.amazon.com/gp/product/B00099XMF2/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00099XMF2&linkCode=as2&tag=chri0e2-20&linkId=4Q7AYPEBETYGAWJL **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Headlight restoration. Restore those foggy, hazy, headlights and learn how renew headlights to make your headlights clear and look new again. Headlight lens restoration using sandpaper is the guaranteed method to get your headlights clear. It doesn't take much effort, but you need to follow these steps to get great results. Watch to see the results I came up with. Permanent Headlight Restoration: https://www.youtube.com/watch?v=UEJbKLZ7RmM Toothpaste Headlight Restoration: https://www.youtube.com/watch?v=rXHTXdlWw1w **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Top 10 Tools. In this video I'll share with you my top 5 favorite shop tools, then introduce to you bleepinjeep who will show you his top 5 here: https://www.youtube.com/watch?v=dL2WngN41_w Breaker Bar: http://www.amazon.com/gp/product/B00MWVAUT6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00MWVAUT6&linkCode=as2&tag=chri0e2-20&linkId=REXYCCRFYOCNT5BX Multimeter: http://www.amazon.com/gp/product/B00TWTLWT8/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00TWTLWT8&linkCode=as2&tag=chri0e2-20&linkId=GD7DO7J75MW277FW OBD2 Scanner: http://www.amazon.com/gp/product/B00652G4TS/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00652G4TS&linkCode=as2&tag=chri0e2-20&linkId=BQQZHIY2BERASOXD Rapid Lift Jack: http://www.amazon.com/gp/product/B00P4CF27K/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00P4CF27K&linkCode=as2&tag=chri0e2-20&linkId=SUMR4BE42IE6NMKE Jack Stands: http://www.amazon.com/gp/product/B000CO86BY/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000CO86BY&linkCode=as2&tag=chri0e2-20&linkId=IDANVH4YNSIQGIIR My dog Spike: Priceless! **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to change a headlight bulb and the do's and don'ts of changing a headlight bulb. This video gives you tips and tricks on how to change a headlight bulb. I am not trying to show you how to install the light for your specific car, but I am showing you tips and tricks on the install. Such as dont touch the bulb with your finger or check the box before you buy it for damage. Trailblazer Headlight Bulb Replacement: https://www.youtube.com/watch?v=OMYHemqSQyQ How to Test a Car Battery: https://www.youtube.com/watch?v=COJr7OB23Hw Top 10 Mistakes Car Owners Make: https://www.youtube.com/watch?v=gkn-K2noClw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to replace C4 Corvette headlight bulbs. **This video will go though the steps for changing the headlight bulbs in a C4 Corvette. The Vette uses 6x7 (aka 5x7) sealed beam headlights. The tools are basic and the job is really easy. You can do both sides in 20min no problem. Here is the bulb: http://www.amazon.com/gp/product/B0006309WA/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0006309WA&linkCode=as2&tag=chri0e2-20&linkId=C2QPLH7MNEK3UXHP How to change the Fog Light in a C4 Corvette: https://www.youtube.com/watch?v=vTl6UNMKjLc How to Change the Spark Plugs and Wires in a Corvette: https://www.youtube.com/watch?v=Gr2oFPfAg90 C4 Vette Climate Control Codes: https://www.youtube.com/watch?v=lWIrT8tN-a8 How to change the headlight motor gear in a C4 Corvette : https://www.youtube.com/watch?v=sPj1kJm4AnU How to Change the Battery in a C4 Corvette: https://www.youtube.com/watch?v=gk03-roWP2A **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to install camber kits. Learn how to install camber bolts so you can adjust the camber on your car or truck. You do not need any special tools to do this job, just a few basic hand tools. The job straight forward and anyone with basic tools can do it! Here are the camber bolts I used: http://www.amazon.com/gp/product/B000C59Z68/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000C59Z68&linkCode=as2&tag=chri0e2-20&linkId=26D3EOGD347BALC5 How to replace a tie rod end FAST: https://www.youtube.com/watch?v=FxHnN9-rzoI How to replace a Control Arm: https://www.youtube.com/watch?v=v7bOxQe_WhU How to replace a Shock Absorber: https://www.youtube.com/watch?v=E6dEXhEGoU8 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to check tie rods and how to verify a tie rod end is worn, Learn how to tell if your inner and outer tie rods are good or bad on your car or truck. Good place to find tie rods (inexpensive): http://www.amazon.com/s/ref=as_li_ss_tl?_encoding=UTF8&camp=1789&creative=390957&field-keywords=tie%20rod&linkCode=ur2&tag=chri0e2-20&url=search-alias%3Daps&linkId=ADEZROARFJ2ZYZYO How to replace an outer tie rod: https://www.youtube.com/watch?v=FxHnN9-rzoI How to replace the inner and outer tie rod: https://www.youtube.com/watch?v=05XOhz67jGA How to replace a Control Arm: https://www.youtube.com/watch?v=v7bOxQe_WhU **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Outer tie rod replacement. Learn how to replace tie rod ends. This video will show you how to change the outer tie rod of your car or truck. You do not need any special tools to do this job, just a few basic hand tools. The job straight forward and anyone with basic tools can do it! Find an inexpensive tie rod here: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=tie%20rod&linkCode=ur2&tag=chri0e2-20&url=search-alias%3Daps&linkId=UETDGY3TB3DUQ73O Socket set I use: http://www.amazon.com/gp/product/B000LY5AKU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000LY5AKU&linkCode=as2&tag=chri0e2-20&linkId=36ETFCATN72TTWX7 Torque Wrench I used: http://www.amazon.com/gp/product/B00C5ZL0RU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00C5ZL0RU&linkCode=as2&tag=chri0e2-20&linkId=UEPR3OTNXEWWGLKV Grease Gun: http://www.amazon.com/gp/product/B000288JE4/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000288JE4&linkCode=as2&tag=chri0e2-20&linkId=ZZ4HJDBMPF65KUTO Chassis Grease for the Tie Rod Ends: http://www.amazon.com/gp/product/B002KCWWFC/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B002KCWWFC&linkCode=as2&tag=chri0e2-20&linkId=JMIPQIFUL6EOYFXL How to tell if your tie rod is bad: https://www.youtube.com/watch?v=brI2feYiEi8 How to replace the inner and outer tie rod: https://www.youtube.com/watch?v=05XOhz67jGA How to Replace a different outer tie rod: https://www.youtube.com/watch?v=8lJvb3tFjfc How to replace a Control Arm: https://www.youtube.com/watch?v=v7bOxQe_WhU **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Ball joint press. Learn how to press a lower ball joint by using a ball joint press. I show you in depth how to press out a bad ball joint and press in a new ball joint. I go through what adapters to use, how to use them, how to properly press the ball joint in and out without damaging it, and give you tips and tricks along the way. Ball Joint Press I used: http://www.amazon.com/gp/product/B0028QGT7W/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0028QGT7W&linkCode=as2&tag=chri0e2-20&linkId=QRXHAVE4ODFQXOWN Quality/Inexpensive Ball Joints: http://amzn.to/1X4yBJh How to change a ball joint (all of the steps): https://www.youtube.com/watch?v=ZztbAShnlxw Cutaway of a ball joint: https://www.youtube.com/watch?v=04DJ1R5cSy4 How to tell if your ball joint is bad: https://www.youtube.com/watch?v=62bVn7E8gyk Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to replace shock absorbers. Learn how to replace front shocks quickly and easily with no special tools required. Follow the step by step video and you can fix your own car and save a lot of money! See what abuse shocks take: https://www.youtube.com/watch?v=MEZSB1JglDM How to replace rear shocks: https://www.youtube.com/watch?v=D9iUXR1tdO8 Here is where I get my inexpensive shocks: http://www.amazon.com/s/?_encoding=UTF8&ajr=2&camp=1789&creative=390957&fst=as%3Aoff&keywords=shock%20absorber&linkCode=ur2&qid=1420485376&rh=n%3A46325011%2Ck%3Ashock%20absorber&rnid=2941120011&tag=chri0e2-20&linkId=EZHIVCP2ZWHBKAQG Here is the ratchet/socket set I was using: http://www.amazon.com/gp/product/B000LY5AKU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000LY5AKU&linkCode=as2&tag=chri0e2-20&linkId=RBWN72RQEQWY67GV Here is a good inexpensive torque wrench: http://www.amazon.com/gp/product/B00C5ZL0RU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00C5ZL0RU&linkCode=as2&tag=chri0e2-20&linkId=2N3ONYFOY4BYGG76 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Replacing a Lower Control Arm Ball Joint. Learn how to replace a lower ball joint by pressing it out of the control arm and pressing the new one back in. To watch the longer, in depth version, click the link below. Press out a Ball Joint (In-depth): https://www.youtube.com/watch?v=ZztbAShnlxw Here is where to get the ball joint press: http://www.amazon.com/gp/product/B0028QGT7W/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0028QGT7W&linkCode=as2&tag=chri0e2-20&linkId=55OXJOHOJHN44FAS Torque Wrench I use: http://amzn.to/1N65Maz Socket Set I use: http://amzn.to/1BlL0Tj How to check your ball joints to see if they are bad: https://www.youtube.com/watch?v=62bVn7E8gyk In-Depth Version: https://www.youtube.com/watch?v=ZztbAShnlxw Upper Control Arm Replacement: https://www.youtube.com/watch?v=v7bOxQe_WhU How To Press a Ball Joint: https://www.youtube.com/watch?v=37NgLM4tIzw How to Change a Wheel Bearing: https://www.youtube.com/watch?v=BPs-QALECqs Torque Specs are for my 2001 Mazda B3000 (each make and model will have different torque specs so check your service manual for proper torque specs.) -Lower Ball Joint 83-113 ft-lbs and tighten to the next slot for the cotter pin (don't back the nut off) -Upper Control Arm Ball Joint 35-46ft-lbs -Caliper Bracket Bolts 85ft-lbs Link to the part: http://www.autopartswarehouse.com/sku/Moog/Ball_Joint/MOK8771T.html **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Replacing a Lower Control Arm Ball Joint. Learn how to replace a lower ball joint by pressing it out of the control arm and pressing the new one back in. To watch the longer, in depth version, click the link below. Replace a ball joint (short, fast version): https://www.youtube.com/watch?v=E9O_cOB2MTI Here is where to get the ball joint press: http://www.amazon.com/gp/product/B0028QGT7W/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0028QGT7W&linkCode=as2&tag=chri0e2-20&linkId=55OXJOHOJHN44FAS Torque Wrench I use: http://amzn.to/1N65Maz Socket Set I use: http://amzn.to/1BlL0Tj Ball Joints: http://amzn.to/2qEOOhc How to check your ball joints to see if they are bad: https://www.youtube.com/watch?v=62bVn7E8gyk In-Depth Version: https://www.youtube.com/watch?v=ZztbAShnlxw Upper Control Arm Replacement: https://www.youtube.com/watch?v=v7bOxQe_WhU How To Press a Ball Joint: https://www.youtube.com/watch?v=37NgLM4tIzw How to Change a Wheel Bearing: https://www.youtube.com/watch?v=BPs-QALECqs Torque Specs are for my 2001 Mazda B3000 (each make and model will have different torque specs so check your service manual for proper torque specs.) -Lower Ball Joint 83-113 ft-lbs and tighten to the next slot for the cotter pin (don't back the nut off) -Upper Control Arm Ball Joint 35-46ft-lbs -Caliper Bracket Bolts 85ft-lbs **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Replacing Upper Control Arm. Learn how to replace an upper control arm and ball joint quickly and easily with no special tools required. Follow the step by step video and you can fix your own car and save a lot of money as well as get the job done correctly! Inexpensive Control Arms I use:http://amzn.to/1IBs3wj Torque Wrench I use: http://amzn.to/1N65Maz Socket Set I use: http://amzn.to/1BlL0Tj *PLEASE WATCH if you are doing this job: https://www.youtube.com/watch?v=-QczV_6v42A How to replace a ball joint: https://www.youtube.com/watch?v=ZztbAShnlxw How to replace a lower control arm: https://www.youtube.com/watch?v=CmN2dRAiuj0 How to replace a tie rod: https://www.youtube.com/watch?v=05XOhz67jGA **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to check a car battery using a multimeter. Does your car not start, do you have dim headlights or interior lights, does the starter sound weak when start the engine, or does your car die sitting overnight? This video will show you a few ways to test your battery to see if it is bad, is going bad, or is good. A good battery will hold a charge at around 12.6v and while the car is starting it wont drop below 8-10v. Inexpensive yet great multimeter: http://www.amazon.com/gp/product/B001O1X65A/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B001O1X65A&linkCode=as2&tag=chri0e2-20&linkId=QOKNQEUCKSZLY37M Test your Alternator: https://www.youtube.com/watch?v=LGB6ZEjGm7Q Check for Parasitic Draw: https://www.youtube.com/watch?v=n5FJDgcdii8 Top 10 Mistakes Car Owners Make: https://www.youtube.com/watch?v=gkn-K2noClw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Diagnosing Alternator Problems. Learn how to test an alternator with a Multimeter. Does your car not start, do you have dim headlights or interior lights, does the starter sound weak when start the engine, or does your car die sitting overnight? This video will show you a few ways to test your alternator to see if it is bad, is going bad or is good. A good alternator will show a charge at around 14.2-14.7v while the car is running and under an electrical load it wont drop below 13v. Here is a great multimeter for under $20: http://www.amazon.com/gp/product/B001O1X65A/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B001O1X65A&linkCode=as2&tag=chri0e2-20&linkId=DQXKJ44LE7TL32CR Test your Battery: https://www.youtube.com/watch?v=COJr7OB23Hw Check for Parasitic Draw: https://www.youtube.com/watch?v=n5FJDgcdii8 Top 10 Mistakes Car Owners Make: https://www.youtube.com/watch?v=gkn-K2noClw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Using a Multimeter to Test Fuel Injector Resistance Ohms. Learn how to check fuel injectors to make sure they are working. You use a multimeter on the resistance settings and measure the ohms of the injector. All injectors should be within .5 ohms of each other. If an injector is out of the resistance specification, that injector is bad. Symptoms of bad injectors are a check engine light with codes P0300 through P0308, misfiring, hesitation, poor fuel economy, stalling, and a poor idle. Using a Screwdriver to test fuel injectors (EASY): https://www.youtube.com/watch?v=tA_E6X4ISgQ How to test Fuel Pressure : https://www.youtube.com/watch?v=_oXLUqE4Sf0 How to Test Spark Plug Wires: https://www.youtube.com/watch?v=4_EFGAFxi1w **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to test fuel injectors for pulsing. Learn how to check fuel injectors. I use a screwdriver to test fuel injectors to make sure they are firing. You place a long screwdriver to the base of each injector and put your ear to the end of the screwdriver (like a doctors stethoscope). You should hear constant clicking. If not, then your injector isn't firing or is firing intermittently. Symptoms of bad injectors are a check engine light with codes P0300 through P0308, misfiring, hesitation, poor fuel economy, stalling, and a poor idle. Using a Multimeter to Check Fuel Injector Resistance: https://www.youtube.com/watch?v=ZVXchvHefNc **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to Change Power Steering Fluid. Learn how to quickly change your power steering fluid. If you dont jack the car up/turn the wheel, this will take you 10min max. The power steering fluid should be changed based on your owners manual service section (typically in the back of the book). Symptoms of bad power steering fluid are brown or black fluid, a loud power steering pump, and having a hard time turning the steering wheel. How to Quiet a power steering pump (product review): https://www.youtube.com/watch?v=BD3PTy2B1EI How to COMPLETELY Flush your Power Steering Fluid: https://www.youtube.com/watch?v=A0fiZCHz5ew **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Belt squeal, squeaking squeaky belt, belt noise? Learn how to fix a squeaky belt in your car. The serpentine belt in your car powers the accessories such as air conditioning, power steering, the alternator, fan, and waterpump. There are many different reasons why the belt will squeak but fix it quickly and easily with baby powder (talcum powder). Learn how to fix the squeak permanently: https://www.youtube.com/watch?v=AEUe6uKxTv8 WD40 to quiet the belt: https://www.youtube.com/watch?v=Fv6zuTT9YOI Replace Idler Pulley: https://www.youtube.com/watch?v=axAltpW8wR4 Replace Tensioner Pulley: https://www.youtube.com/watch?v=G4PS7WHlgi0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Flushing power steering fluid and eliminate power steering pump noise. This video shows you how to drain all of your power steering fluid and completely flush out the system. This method will ensure you get a complete fluid change and flush to give you another 100k miles of care free driving. The power steering fluid should be changed based on your owners manual service section (typically in the back of the book). Symptoms of bad power steering fluid are brown or black fluid, a loud power steering pump, and having a hard time turning the steering wheel. How to Quiet a power steering pump (product review): https://www.youtube.com/watch?v=BD3PTy2B1EI How to Flush your Coolant: https://www.youtube.com/watch?v=s--5ft5YiHg Power Steering Fluid Change, Fast and Easy: https://www.youtube.com/watch?v=VuPALAnHjRM Power Steering Additive I use: http://amzn.to/1esz5sE The turkey baster I used: http://www.amazon.com/gp/product/B002U9JSIE/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B002U9JSIE&linkCode=as2&tag=chri0e2-20&linkId=BUCBRFLHTPAYI6RV **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Fixing Noisy Power Steering On Your Car. Noisy Power Steering and Heavy Steering Wheel Problem? This video is a how to/product review on how to fix a noisy power steering pump. Out of nowhere my power steering pump got really loud and I thought I was low on fluid. In reality, my fluid is just really old and I need to flush it but in the meantime I used a power steering additive to stop the whine and shudder of the power steering pump. Here is another product that works to quiet the pump since it is hard to find the one I used in the video: http://www.amazon.com/gp/product/B000930N0U/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000930N0U&linkCode=as2&tag=chri0e2-20&linkId=PR7CP6VDW553YLRY How to Flush Your Power Steering Fluid: https://www.youtube.com/watch?v=A0fiZCHz5ew How to Change you Power Steering Fluid (fast flush): https://www.youtube.com/watch?v=VuPALAnHjRM **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Dumb Things NOT To Do To Your Car. In this video I go over major mistakes I see people make all of the time with their cars. Let me know if you can think of a big car mistake people make by leaving a comment below! Tire Air Pressure Gauge I used: http://amzn.to/2hhbqzS Top 10 Car Cleaning Mistakes: https://www.youtube.com/watch?v=ef_-SNSnByg **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: http://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Testing spark plug wires and diagnosing bad spark plug wires. Learn how to test spark plug wires with a multimeter. If your car is stalling, idling poorly, hesitating, getting bad fuel economy, misfiring, or you have a check engine light, you should check your spark plug wires. This will also show you How To Fix P0300 random misfire codes in your car. There are 3 main tests I go over 1. Water spray at night (look for sparks) 2. Visual inspection (cracks, burns, etc) 3. Using a multimeter (ohm meter resistance test) How to gap a spark plug: https://www.youtube.com/watch?v=IuW3svdqKZM How to replace spark plug wires: https://www.youtube.com/watch?v=vaRl2aWPAcU BMW Spark Plug Replacement: https://www.youtube.com/watch?v=gF9Bo4DDkE4 Spark Plug Wire Looms out of Zip Ties: https://www.youtube.com/watch?v=xWO1Oes7oJw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Spark Plug Wire Replacement on a Ford Ranger. This video shows how to replace the spark plug wires on a V6 Mazda B3000 (Ford Ranger). It is a straight forward process and will take about 2 hours if you take your time. These new wires increased my fuel economy from 16mpg to 17.5mpg and the idle is a lot smoother now. How to gap a spark plug: https://www.youtube.com/watch?v=IuW3svdqKZM BMW Spark Plug Replacement: https://www.youtube.com/watch?v=gF9Bo4DDkE4 Spark Plug Wire Looms out of Zip Ties: https://www.youtube.com/watch?v=xWO1Oes7oJw How to check for bad spark plug wires: https://www.youtube.com/watch?v=4_EFGAFxi1w **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Make spark plug wire looms out of zip ties. When you replace your spark plug wires, odds are you will break a wire loom or two. Sometimes it is hard to find special wire looms or looms for your application so a cheap yet effective way to protect your plug wires from chaffing and melting against the exhaust manifold is to use zip ties. It also makes your engine compartment very neat and organized! Colored Zip Tie Pack:http://amzn.to/1PGRL1O Here is how to use Zip Ties to fix your bumper (Drifter's Stitch): https://www.youtube.com/watch?v=M6hlVoX0B_k How to Change Spark Plug Wires: https://www.youtube.com/watch?v=vaRl2aWPAcU Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to put in sound deadening and heat reflective material into your car. In this case I was preventing a common wet carped problem due to condensation. The exhaust runs right under the floorboards and causes a lot of condensation and over time that causes the carpets to get damp. Sound deadener insulation I used: http://www.autopartswarehouse.com/sku/Univ/Design_Engineering/Sound_Dampening_Material/D43050501.html **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to replace an engine mount, motor mount, or transmission mount. Learn the main methods for replacing a bad motor mount or bad transmission mount. This will give you an idea of how easy of a job changing a motor mount is! How to Diagnose a Bad Motor Mount: https://www.youtube.com/watch?v=ZTRV5GXWpo0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to tell if a motor mount is bad. How to check loose or bad motor engine mount. Learn the main methods for diagnosing a bad motor mount or bad transmission mount. The first method is to watch the engine as it goes in and out of gear. The next method is to drive the car (when you know it is aligned properly) and see if it pulls. How to replace a Transmission Mount : https://www.youtube.com/watch?v=3nV1XSbePT4 How to replace another Motor Mount: https://www.youtube.com/watch?v=33k3vL-j68Y **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to replace wiper blades. Although it seems trivial, watching how to install wiper blades is usefull because when it is dark, pouring rain, snowing, or thunder and lightening out, you do not want to have to learn how to put wiper blades on. This fast video will show you how to put a rear wiper on, but this will be the same method for any "hook" style wiper. Follow this link for inexpensive wiper blades: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=wiper%20blades&linkCode=ur2&sprefix=wiper%2Caps&tag=chri0e2-20&url=search-alias%3Daps&linkId=UPBBVO7KO5GRZC62 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

New automotive "how to" videos that save you time and money EVERY THURSDAY and a bonus video some Mondays, so stay tuned! Let me know what you guys think of the trailer in the comments section below! Thanks! **If you like my channel trailer, please give it a "thumbs up" and consider subscribing** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to diagnose a bad radiator hose visually, and by feel. Also learn how to replace the upper and lower radiator hoses. Most radiator hoses will last over 200k miles (this one was 280k) and over 15yrs. Replacing the radiator hoses is easy for both the upper and lower radiator hoses in most cars yet they charge a lot to do the job, so do it yourself and save a ton of money! **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to Break In A New or Rebuilt Engine. This video will explain how to break in a new car engine. It is important to break in a new engine so you get a good piston ring seal and good wear on engine parts when it is first breaking in. This method applies to most cars but there are always exceptions so read your owners manual. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Trailblazer headlight bulb replacement. Learn how to change headlights on 02-09 Trailblazer. This video shows you how to quickly and easily replace your headlight bulbs on a Chevy trailblazer. The fastest way is to remove the grill and this will give you easy access to the headlights. Here are the bulbs I used: http://www.amazon.com/gp/product/B000BLGPGQ/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000BLGPGQ&linkCode=as2&tag=chri0e2-20&linkId=3YDS3SNC3GKFIW5K **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Replacing Lower Control Arm and Ball Joint. Learn how to replace a lower control arm with the lower ball joint. I show the process in a 95 ford windstar but it is similar in many different makes and models. This is a single arm control arm with a strut bar for support. A wishbone lower control arm will be similar minus the strut bar. WATCH THIS if you are changing out your control arm: https://www.youtube.com/watch?v=-QczV_6v42A Upper Control Arm Replacement: https://www.youtube.com/watch?v=v7bOxQe_WhU How to Change Tie Rods:https://www.youtube.com/watch?v=05XOhz67jGA Ball Joint Replacement: https://www.youtube.com/watch?v=ZztbAShnlxw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to replace spark plugs in a BMW. Replace the spark plugs in your BMW and save $200-$400 and you can EASILY do it yourself. This job is simple and anyone can do it with basic hand tools. This is a 4.4 L V8 E39, but this job can be applied to any BMW. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Watch a minnow trap catching minnows and other fish in a salt marsh pond under ice. The fish caught are mummichogs which are very hardy and are used as a baitfish all the time. There were sheepshead minnows and spearing swimming around outside the trap. The bait inside the trap is a piece of hot-dog roll. The trap I use is GEE'S Galvanized Minnow Trap: http://www.amazon.com/gp/product/B0033OI7V4/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0033OI7V4&linkCode=as2&tag=chri0e2-20&linkId=W7SA7OEJSOW7U6Z2 Click here to watch Cocahoe minnows POV in Louisiana: https://www.youtube.com/watch?v=dr3StNw-4dM Click the link for the first POV video: https://www.youtube.com/watch?v=ogM8bBkghqA Click the link for the second POV video: https://www.youtube.com/watch?v=KJjM4j6CBi8 Click the link to see these minnows hatching in the lab! https://www.youtube.com/watch?v=T3SUvDmIYhw **If the video was enjoyable, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix

Airbag light on or airbag light flashing? This video will show you how to diagnose and fix a flashing airbag light. The flashing means that there is a fault with the system. You can read the number of flashes and it will give you a code (codes listed below for ford ranger and Mazda B3000). If your code is not listed, just google the year, make and model of your car along with "airbag light code" (ex. 2001 Mazda B3000 airbag light code). In this case it was code 4-6 which is the drivers side seat-belt pretensioner circuit which is cause by the wire/clip under the seat coming loose or getting moisture in it. Just separate the clip and spray some wd40 or electric cleaner in there and reconnect. Ford Ranger, Ford Explorer, Mazda B3000 Airbag codes (2000-2005) 15- drivers side air bag circuit shorted 16- passenger side air bag circuit shorted 19- restraint control module (RCM) memory full 24- restraint control module (RCM) internal fault 25- passenger air bag deactivation (PAD) switch fault 27- passenger air bag deactivation (PAD) warning lamp inoperative 29- Incorrect Vehicle Identification Code 32- driver air bag circuit resistance high 33- passenger air bag circuit resistance high 34- driver air bag circuit resistance low 35- passenger air bag circuit resistance low 43- front impact sensor 46- drivers side seat-belt pretensioner 47- passenger side seat-belt pretensioner Radio Shack Light Part #: 272-334 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

DIY Windshield Repair. This is a how to fix your chipped windshield. If you do not do this as soon as possible the chip can turn into a crack overnight! It is easy and costs $10... A repair place will charge about $50 to fix the chip and a windshield can cost you over $500 to replace. This short diy video will save you time, money, and frustration! Plus you learn something cool! Here is where I got the window repair kit: http://amzn.to/2twNjjn How to BREAK windshield and door glass and fix a chip: https://www.youtube.com/watch?v=aAsUG-jbLlM Here is another chip repair video using a different repair kit: https://www.youtube.com/watch?v=YK1kpSZpMPM&list=PLDD611CFB36FC65F2 How to Super Clean a Windshield: https://www.youtube.com/watch?v=vJkfrY2owb0&list=PLDD611CFB36FC65F2 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to replace fog lights. This video goes step by step to show you how to replace your fog lights in a mazda B-series pickup truck. It isnt as simple as it looks because the bumper has to come off (4 bolts). The bolts holding my lights in were rusty and most of them broke so I replaced them. I was impressed with the quality of the lights for the price and I will keep everyone posted on how they last. Link to the fog lights: http://amzn.to/2cqdLpe **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace your brake pads and rotors on your car. Most cars with brake calipers will be similar to this and after watching this you will be able to change your own brakes and save money. Front and Rear Brake Pad and Rotors: https://www.youtube.com/watch?v=lU6OKQxSg8U Wheel Cylinder Replacement: https://www.youtube.com/watch?v=GIWYkCOPAQ0 Drum Brake Replacement: https://www.youtube.com/watch?v=zJ_UXP6GWkw Paint Your Brakes: https://www.youtube.com/watch?v=djmDciOIuls **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Belt squeal, squeaky belt, or belt noise? Learn how to quiet a squeaky belt in your car. I show you how to temporarily quiet the belt using WD40 so that you can drive to the parts store without the annoying squeal. The serpentine belt in your car powers the accessories such as air conditioning, power steering, the alternator, fan, and waterpump. There are three types of serpentine belt wear, pilling, glazing, and abrasion. Pulley wear will cause your pulley to squeak. A worn out pulley bearing or a worn spring in the tension pulley can also cause squeaking. How to fix a squeaky belt (figure out where the squeak is coming from): https://www.youtube.com/watch?v=AEUe6uKxTv8 Here is a great belt that prevents squeaks: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=gatorback%20belts&linkCode=ur2&rh=i%3Aaps%2Ck%3Agatorback%20belts&tag=chri0e2-20&url=search-alias%3Daps&linkId=TKRWEYIIWMXC3PRX How to Diagnose a Squeaky Belt: https://www.youtube.com/watch?v=AEUe6uKxTv8 Idler Pulley: https://www.youtube.com/watch?v=G4PS7WHlgi0 Tensioner Pulley: https://www.youtube.com/watch?v=G4PS7WHlgi0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to check out your own car's suspension system. How To Find Suspension Noises. Learn how to check your suspension for worn ball joints, worn sway bar end links, worn bushings, and worn tie rods. I go through all the steps to check each part so you know if you need to replace suspension parts. This will help keep your vehicle safe when it is on the road. Wheel Bearing Check: https://www.youtube.com/watch?v=YvKWGjmPKoc Ball Joint Check: https://www.youtube.com/watch?v=62bVn7E8gyk Tie Rod Check: https://www.youtube.com/watch?v=brI2feYiEi8 Tie Rod Replacement, How to: https://www.youtube.com/watch?v=05XOhz67jGA **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to test a fuel pump. Learn how to test your fuel pressure, how to test your fuel pressure regulator, and how to test your fuel pump. This video will show you how to diagnose your fuel system. If your car is idling or running weird (high idle, low idle, hard to accelerate, studdering, hard to start) then this is one of the first tests you should do. Diagnose high fuel pressure, low fuel pressure, a broken check valve in the fuel pump, broken fuel pressure regulator, or leaking injectors. Here is the fuel pressure tester I used: http://www.amazon.com/gp/product/B0053NZXQA/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0053NZXQA&linkCode=as2&tag=chri0e2-20&linkId=WJD6YBALKBYZIPAE What does a 300,000 mile fuel filter look like inside: https://www.youtube.com/watch?v=92TfTQTmuq4 Fuel Pressure Regulator Replacement: https://www.youtube.com/watch?v=yG0y3bqaV7E **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to spray paint brake drums. Want to re-use your brake drums? This video will show you how to save some money and safely recondition your brake drums. It costs $50 a drum (and more for some cars) and only $20 to get them turned. Plus, the spray paint will make them look great, prevent rust, and make getting them off the next time very simple (no more stuck rusty brake drums). I used high temperature paint to get the perfect finish and last under heavy braking! High Temp Spray Paint I used: http://www.amazon.com/gp/product/B003CT4AKC/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B003CT4AKC&linkCode=as2&tag=chri0e2-20&linkId=ZDONDDAV7ZJMVCAV How to remove brake drums: https://www.youtube.com/watch?v=y6jpNC6emOQ How to replace brake drums: https://www.youtube.com/watch?v=3FYRwfKNHxw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How To Replace Drum Brake Shoes. Learn how to change the drum brakes. I replace the drum, springs, and shoes in a Ford, but the process applies to most other cars with drum brakes. YOU CAN DO THIS. No special tools required and it will save you a lot of $$$$. Socket Set: http://amzn.to/1N9yN2K Brake Drum Tool: http://amzn.to/1N9yGEh Brake Springs: http://amzn.to/1OklbFP Brake Drum Replacement: https://www.youtube.com/watch?v=3FYRwfKNHxw How to Replace the Wheel Cylinders: https://www.youtube.com/watch?v=GIWYkCOPAQ0 How to change Brake Pads: https://www.youtube.com/watch?v=4DvuUmcslfM How to replace front and rear brakes (Full Guide): https://www.youtube.com/watch?v=lU6OKQxSg8U **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to replace inner and outer tie rods. This video will show you in depth how to change the inner and outer tie rods of your car or truck. You need a special tool, an inner tie rod end tool, to complete the job (this can be rented for free at your local parts store). The job straight forward and anyone with basic tools can do it! Inexpensive tie rods: http://amzn.to/1XckepV Tie rod tool I used: http://amzn.to/1XcjTUf Inexpensive Tie Rod Tool: http://amzn.to/2j7fwYj Torque Wrench I used: http://amzn.to/1XcoPs8 How to check to see if your tie rod is bad: https://www.youtube.com/watch?v=brI2feYiEi8 Tie Rod End Cutaway: https://www.youtube.com/watch?v=3RjhtVse6jE Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to remove a stubborn brake drum. Watch how to remove a brake drum that is stuck on. I go through the steps so anyone can remove their drum brake. In this case the drum adjuster was stuck so first try to get it off by wiggling back and forth. Then spray penetrating oil to remove rust between the drum and the seat. Then hit it with a hammer hard. This should free the drum if it is just rusted on. If the drum doesn't come off, then your brakes are probably stuck open preventing the drum from coming off. If this is the case, cut or drill out the holding pins from the back (that hold the shoes in place) and remove the screws to the brake cylinder and then pull the drum off. Drum Brake Replacement: https://www.youtube.com/watch?v=zJ_UXP6GWkw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

C4 Corvette check engine light, or in this case check air conditioning system light can be used to diagnose what is wrong with your climate control system. The light above the climate control buttons will flash indicating a problem and you can check the codes by holding the up and down fan buttons for 5sec. You will see -00 and then hit the auto fan button to get the code. How to Replace the Battery in a C4 Corvette: https://www.youtube.com/watch?v=gk03-roWP2A How to Change the Fuel Pressure Regulator in a C4: www.youtube.com/watch?v=yG0y3bqaV7E How to Change the Waterpump in an LT1 or LT4: www.youtube.com/watch?v=vTl6UNMKjLc Sick Nasty Z06 Corvettes in a parking garage: www.youtube.com/watch?v=DpWErJC5kZA The codes are: Temperature door motor circuit fault...01 Temperature door motor circuit fault...02 Outside air temp sensor open...........03 Outside air temp sensor short...........04 Inside air temp sensor open..............05 Inside air temp sensor short..............06 Sun load sensor open.......................07 Low refrigerant detected....................09 Serial data failure.............................10 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Watch POV a minnow trap catching giant Gulf killifish (Cocahoes) in a salt marsh pond in Louisiana. The fish caught are Gulf Killifish, Fundulus grandis, which are very hardy and are used as a baitfish all the time for redfish, snapper, speckled trout, etc. The bait inside the trap is dry dog food. You can see once one fish goes in, the rest start to follow. The more fish that move into the trap, the more that are willing to follow behind them! The trap I use is GEE'S Galvanized Minnow Trap: http://www.amazon.com/gp/product/B0033OI7V4/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0033OI7V4&linkCode=as2&tag=chri0e2-20&linkId=W7SA7OEJSOW7U6Z2 Minnow Trap UNDER a thick layer of ICE! https://www.youtube.com/watch?v=a75e3E0oca8 Click the link for the first POV video: https://www.youtube.com/watch?v=ogM8bBkghqA Click the link for the second POV video: https://www.youtube.com/watch?v=KJjM4j6CBi8 Click the link to see these minnows hatching in the lab: http://youtu.be/T3SUvDmIYhw **If the video was enjoyable, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix

Learn how to check the temperature at which your coolant will freeze. This is good to know for the upcoming winter and it will prevent damage to your car if freezing temperatures persist. Coolant, also know as antifreeze prevents the water in your car from freezing and cracking the engine block or breaking hoses. It also prevents the water from boiling over and overheating the engine. Antifreeze has lubricants and additives that prevent rust so it should always be used in your vehicle. The amount of coolant you need varies on make, model, and where in the world you live. In warmer climates you dont need as much antifreeze because it doesnt get cold. Since water cools better than antifreeze, it is important that you find the right ratio. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to use RTV to make a rear differential gasket, waterpump gasket, oil pan gasket, thermostat gasket, valve cover gasket, or whatever needs a gasket but you cant find a gasket. Using this method will help make sure you seal whatever you are working on, properly. If you dont use the RTV gasket maker correctly then you can get a leak and all that hard work was for nothing. Here is the RTV I used: http://www.amazon.com/gp/product/B000FW2NB2/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000FW2NB2&linkCode=as2&tag=chri0e2-20&linkId=ZNK4MMBHUJ45JGCS **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to fix a squeaky tensioner pulley in your car. The serpentine belt in your car powers the accessories such as air conditioning, power steering, the alternator, and waterpump. Tensioner pulley wear will cause your pulley to squeak. A worn out pulley bearing or a worn spring in the tension pulley can also cause squeaking or a chirp. I show you how to use water to identify what type of squeak problem you have and then how to find the problem. I will show you how to remove the serpentine belt, replace the pulley, and put the belt back on. Here is a good place to find inexpensive Tensioner pulleys: http://www.amazon.com/s/ref=as_li_ss_tl?_encoding=UTF8&camp=1789&creative=390957&field-keywords=tensioner%20pulley&linkCode=ur2&tag=chri0e2-20&url=search-alias%3Daps&linkId=EKNKRNC352XOUKFF Here is a great belt that prevents squeaks: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=gatorback%20belts&linkCode=ur2&rh=i%3Aaps%2Ck%3Agatorback%20belts&tag=chri0e2-20&url=search-alias%3Daps&linkId=TKRWEYIIWMXC3PRX Belt Tensioner Tool: http://amzn.to/1QnbR8b How to Diagnose a Squeaky Belt: https://www.youtube.com/watch?v=AEUe6uKxTv8 Tensioner Pulley: https://www.youtube.com/watch?v=G4PS7WHlgi0 Find the Belt Squeak: https://www.youtube.com/watch?v=Au6YzsEKPRQ WD40 to quiet the belt: https://www.youtube.com/watch?v=Fv6zuTT9YOI **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Idler pulley squeak? Learn how to fix a squeaky pulley in your car. The serpentine belt in your car powers the accessories such as air conditioning, power steering, the alternator, and waterpump. Pulley wear will cause your pulley to squeak. A worn out pulley bearing or a worn spring in the tension pulley can also cause squeaking. I show you how to use water to identify what type of squeak problem you have and then how to find the problem. Belt Tensioner Tool: http://www.amazon.com/gp/product/B004KED77A/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004KED77A&linkCode=as2&tag=chri0e2-20&linkId=XSARH6PVR3GFHYLR Here is a good place to find inexpensive idler pulleys: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=idler%20pulley&linkCode=ur2&rh=i%3Aaps%2Ck%3Aidler%20pulley&tag=chri0e2-20&url=search-alias%3Daps&linkId=QZ5DDRVWUI2UMDWG Here is a great belt that prevents squeaks: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=gatorback%20belts&linkCode=ur2&rh=i%3Aaps%2Ck%3Agatorback%20belts&tag=chri0e2-20&url=search-alias%3Daps&linkId=TKRWEYIIWMXC3PRX How to Diagnose a Squeaky Belt: https://www.youtube.com/watch?v=AEUe6uKxTv8 Tensioner Pulley: https://www.youtube.com/watch?v=G4PS7WHlgi0 Find the Belt Squeak: https://www.youtube.com/watch?v=Au6YzsEKPRQ WD40 to quiet the belt: https://www.youtube.com/watch?v=Fv6zuTT9YOI **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to change your rear differential fluid. In this process I unbolt the differential cover (pumpkin cover) because there is no drain plug. Then I make my own gasket with RTV because I couldnt get a gasket for this differential. Only basic tools are needed and anyone could do this job. Remember to "thumbs up" the video if you found it helpful and leave a question/comment below. This is fast and easy maintenance to do to keep your car or truck in tip-top shape. RTV: http://amzn.to/1jNdDko Diff Fluid Pump: http://amzn.to/1hpC1qh Plastic Scraper: http://amzn.to/1PNDyoX Socket Set: http://amzn.to/1LhsWrA Torque Wrench: http://amzn.to/1VCKoSu Oil Catch Can: http://amzn.to/1jNdTQs How to Use a Torque Wrench: https://www.youtube.com/watch?v=5XzKvEnk1FY How to Change Transfer Case Fluid: https://www.youtube.com/watch?v=4Mz3nZ85ihQ How to Change Drum Brakes: https://www.youtube.com/watch?v=3FYRwfKNHxw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to change your rear differential fluid. In this process I unbolt the differential cover (pumpkin cover) because there is no drain plug. Then I make my own gasket with RTV because I couldnt get a gasket for this differential. Only basic tools are needed and anyone could do this job. Remember to "thumbs up" the video if you found it helpful and leave a question/comment below. This is fast and easy maintenance to do to keep your car or truck in tip-top shape. How to Use a Torque Wrench: https://www.youtube.com/watch?v=5XzKvEnk1FY How to Change Transfer Case Fluid: https://www.youtube.com/watch?v=4Mz3nZ85ihQ How to Change Drum Brakes: https://www.youtube.com/watch?v=3FYRwfKNHxw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Your transfer case puts power to your front wheels to make your car, suv, or truck four wheel drive (fwd). Watch the video for a step by step how to which goes into all of the details. Anyone can do this and a service on many vehicles should be done at 100,000 miles. This fluid change will keep your 4x4 system fresh and working properly. How to change rear Differential Fluid: https://www.youtube.com/watch?v=KmqMUJb-E4M RTV: http://amzn.to/1jNdDko Diff Fluid Pump: http://amzn.to/1hpC1qh Plastic Scraper: http://amzn.to/1PNDyoX Socket Set: http://amzn.to/1LhsWrA Torque Wrench: http://amzn.to/1VCKoSu Oil Catch Can: http://amzn.to/1jNdTQs **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Spray paint your cars trim using aerosol spray cans. Spray paint your trim so it is dark black. Does your car have faded trim like on my Mazda b3000 Ford Ranger pickup truck? If you watch this video you will learn how to prep your car for spray painting with a typical paint can and learn how to spray properly without using any special equipment. I really like how nice it came out! Comment below and let me know what you think. Also "like" the video if it was helpful! How to Paint Your Exhaust: https://www.youtube.com/watch?v=9m8k-m-ScOQ Restore Faded Plastic: https://www.youtube.com/watch?v=PQs2ik1dzzE How to Change the Transfer Case Fluid: https://www.youtube.com/watch?v=4Mz3nZ85ihQ How to Change the Rear Differential Fluid https://www.youtube.com/watch?v=KmqMUJb-E4M **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to properly paint your exhaust. It is very easy to do. Painting your mufflers, catalytic converters, exhaust manifolds, and the rest of the exhaust will protect it from rusting and make it look nicer. A painted exhaust will add value to your vehicle and let the exhaust last the life of your car! All you need to do is sand the exhaust, clean it off, spray the paint in even coats, recoat after 30min, and then let cure **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

ALWAYS CUT AWAY FROM YOUR HAND!!! Here I show you how to fillet a fish. The example fish is a Blackfish aka Tog (Tautoga onitis). This method works for most fishes and is the simplest way to fillet. I give a basic breakdown of how to make your cuts and slowly go though it so you can follow along. Here is the fillet kit I was using: http://www.amazon.com/gp/product/B000G0F0HW/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000G0F0HW&linkCode=as2&tag=chri0e2-20&linkId=GUQPH6BE5Q4SKSBO 1.) Cut behind the head from the top all the way to the bottom of the head. 2.) Cut down the stomach cavity to the anal fin 3.) Cut along the dorsal fin rays starting from the head and moving to the tail 4.) Place the knife perpendicular to the backbone behind the head, and cut to the tail pressing down. 5.) Skin you fillet 6.) Wash your fillet with fresh water and cook or refrigerate for up to 5 days. Disclaimer: Always cut away from your hand, keep your knife sharp, and be careful!

Look under the microscope at Oyster Toadfish eggs and baby fish. As you see in the video, these eggs were hatched and I actually grew one up and released him. Like the video and share with your marine science or fish friends! Click the link to see minnows hatching: https://www.youtube.com/watch?v=T3SUvDmIYhw

Learn how to replace the engine air filter in your car. The truck used in the video is a 2001 Mazda B3000 aka Ford Ranger. This process will be similar on most cars and trucks. In this case no tools were needed. Sometimes you might need a screw driver. An air filter should be replaced every 30-50k miles based on how you use your car. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

We dropped down a ROV (rope operated vehicle lol) to check out Gloria aka Glory which lies about 10mi offshore of Atlantic City and Little Egg inlet. The depth is about 70ft and the structure rises about 20ft off the bottom. I actually got the rig caught on the wreck and we hard reversed to get it out @ 3:42... Got the heart going pretty good! There are black sea bass, tog, cunner, porgy, flounder, and many other fish using the wreck as structure! This is possibly the remains of the Lake Frampton... Let me know what you think and if you have any other ideas/locations to drop the GoPro down in the comments section below. Also like and subscribe if you enjoyed!

Here is my newest Torque Wrench video with even more information and tips: https://www.youtube.com/watch?v=3v3hLvuO_KU Torque Wrench. Torquing bolts is very important to get the bolts tightened to the best spec so they wont loosen or break. This short video will show you how to use a torque wrench. Here is a great torque wrench to start with that will last you a while and wont break the bank: http://www.amazon.com/gp/product/B00C5ZL0RU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00C5ZL0RU&linkCode=as2&tag=chri0e2-20&linkId=WNZW4TPJWSEEOZWG **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Click the link for the first POV video: https://www.youtube.com/watch?v=ogM8bBkghqA This is a point of view (POV) video of a minnow trap catching fish in a salt marsh creek. The fish caught are sheepshead minnows and mummichogs which are very hardy and are used as a baitfish all the time. The bait inside the trap is a piece of hot-dog roll. You can see once one fish goes in, the rest start to follow... The more fish that move into the trap, the more that are willing to follow behind them! The trap I use is GEE'S Galvanized Minnow Trap: http://www.amazon.com/gp/product/B0033OI7V4/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0033OI7V4&linkCode=as2&tag=chri0e2-20&linkId=W7SA7OEJSOW7U6Z2 Watch Cocahoe minnows POV in Louisiana: https://www.youtube.com/watch?v=dr3StNw-4dM Watch these minnows hatching in the lab: http://youtu.be/T3SUvDmIYhw **If the video was enjoyable, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix

Learn how to change the fan clutch on your Mazda B3000 and Ford Ranger pickup trucks. The fan clutch replacement process will also work for almost any other car out there that has a fan clutch and not an electric fan. What the fan clutch does is regulate the speed of the fan so that the engine can warm up fast, yet stay cool when its at operating temps (like how a thermostat regulates temp). When the fan clutch goes bad, it can lock up and spin at full speed depending on the engine rpm. The problem is that at high rpms your belt can break, the fan can break, and you engine makes a lot of noise. This video will teach you how to change the fan clutch ($30) and save at least $150. Fan Clutch: http://amzn.to/2giFyaF This also works for the bronco II 2.9 motor (and many other motors) **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

The PT Cruiser thermostat is easy to replace. If your car is overheating but you have plenty of coolant then this might be your problem. To change the thermostat all you have to do is unbolt the radiator fill cap and you have fast access. It is not the easiest thermostat to get to but it isnt bad. It could also be due to a bad head gasket which is what happened to mine. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Fixing Leaking Brake Wheel Cylinders. The wheel brake cylinder is vital to your drums braking capability. In this video I show you the process of replacing the drum brake wheel cylinder. It is easy to do and anyone can do it. It takes about an hour if you take your time. Find inexpensive replacement wheel cylinders here: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=drum%20brake%20cylinder&linkCode=ur2&sprefix=drum%20brake%20cy%2Caps&tag=chri0e2-20&url=search-alias%3Daps&linkId=3OAKXZ353OGL2C5U To learn how to change your drum shoes (remove the springs to get to the wheel cylinder): https://www.youtube.com/watch?v=3FYRwfKNHxw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to Super Clean Your Windshield by waxing your windshield. You will have the cleanest, clearest looking windshield (almost like new). The wax layer repels water better than RainX and helps prolong the life of your windshield wipers. Let me know what you think by commenting below and give it a try! Who would have thought waxing your windows would work! Here is the glass cleaner I used: http://amzn.to/1VUxj2P Here is the wax I used: http://www.amazon.com/gp/product/B000AP8DZY/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000AP8DZY&linkCode=as2&tag=chri0e2-20&linkId=MS4HBBWOR43ALKUU Inexpensive Microfiber Towels: http://www.amazon.com/gp/product/B009FUFBTG/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B009FUFBTG&linkCode=as2&tag=chri0e2-20&linkId=6MPB2AAWC2ZNX3OD Check out my newest SUPERCLEAN your windshield video: https://www.youtube.com/watch?v=vJkfrY2owb0 Top 10 Car Cleaning Mistakes: https://www.youtube.com/watch?v=ef_-SNSnByg **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This video shows you how to make a cold air intake for your lawnmower. While it may seem stupid to do, it isnt really for power gains like a car. It is to keep the filter away from the hot dusty engine. Hope you enjoy this "different" video lol. Remember stickers add an extra 5hp each! **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to properly remove a dandelion from your lawn to make sure it never grows back. Most people just rip them out with their hands but doing that doesnt remove the deep root from the lawn. This root then grows another dandilion and you have accomplished nothing. I use a special tool (you can use a small shovel) to remove the whole plant, root and all, and then show you the proven results. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix

Parasitic Draw Test and how to find a short. Does your car battery die after your car sits for a few hours, a day, or a couple of days? Well there are 3 causes for this: bad/old battery, a bad alternator, and a short (parasitic draw). This video shows you how to see if you have a short and then how to diagnose that short. Here is a good yet inexpensive multimeter you can use for this test: http://www.amazon.com/gp/product/B001O1X65A/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B001O1X65A&linkCode=as2&tag=chri0e2-20&linkId=KP2P5CB4LHRHVABF The follow-up video with how I fixed the short:https://www.youtube.com/watch?v=Lj1lNnxuGEo **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This shows how to change out the Multifunction Switch on a PT Cruiser or Dodge Neon. The fog lights would stay on and drain the battery even in the off position... This replacement will work for any PT Cruiser. The multiswitch is a well know problem for Pt Cruisers but it can be easily fixed with no special tools. The job takes 30min if you take your time. I got the part for $60 so shop around. A job like this done at the dealer would cost anywhere from $200-$400. Here is the part I used that will fit any 2001-2005 PT Cruiser: http://www.amazon.com/gp/product/B00BI3JJW8/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00BI3JJW8&linkCode=as2&tag=chri0e2-20&linkId=DZTENBJATNHX5KPE Parasitic Draw Test: https://www.youtube.com/watch?v=n5FJDgcdii8 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Fog Light Installation. This video will show you the step by step procedure for replacing the fog lights in a C4 Corvette. Please like the video if it was helpful and comment if you have any questions below! Here is the bulb I used but in LED: http://amzn.to/1O5v4L6 Here is the exact bulb I used: http://amzn.to/1RNpLe5 Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to change a battery in a Corvette. This video will show you the step by step procedure for replacing a car battery in a C4 Corvette. Please like the video if it was helpful and comment if you have any questions below! **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn to replace a pressed wheel bearing in a Ford, specifically a 95 Ford Windstar, but this method will be similar for all pressed bearing vehicles. The main steps are to take off the spindle nut, tire, brake caliper, and rotor. Then remove the bolts from the lower control arm ball joint, tie rod, and strut. Remove the steering knuckle, then press out the bearing and hub/spindle. Then press in your new bearing and hub/spindle. This job is a little more complex but can still be easily done by any amateur mechanic. You will save $400-1000 depending on your vehicle. Here is how to Replace a Hub Bearing Assembly (rear wheel drive): https://www.youtube.com/watch?v=04AyCYIUEWQ Here is how to Replace a Hub Bearing Assembly (front wheel drive): https://www.youtube.com/watch?v=fe_WtKIKlYA Bearing Press Tool: http://www.amazon.com/gp/product/B00AZABHLQ/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00AZABHLQ&linkCode=as2&tag=chri0e2-20&linkId=EIBAN5P55H2K2M5C **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn to replace a pressed wheel bearing in a Ford, specifically a 95 Ford Windstar, but this method will be similar for all pressed bearing vehicles. The main steps are to take off the spindle nut, tire, brake caliper, and rotor. Then remove the bolts from the lower control arm ball joint, tie rod, and strut. Remove the steering knuckle, then press out the bearing and hub/spindle. Then press in your new bearing and hub/spindle. This job is a little more complex but can still be easily done by any amateur mechanic. You will save $400-1000 depending on your vehicle. Here is how to Replace a Hub Bearing Assembly (rear wheel drive): https://www.youtube.com/watch?v=04AyCYIUEWQ Here is how to Replace a Hub Bearing Assembly (front wheel drive): https://www.youtube.com/watch?v=fe_WtKIKlYA Bearing Press Tool: http://www.amazon.com/gp/product/B00AZABHLQ/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00AZABHLQ&linkCode=as2&tag=chri0e2-20&linkId=EIBAN5P55H2K2M5C **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Part 1: https://www.youtube.com/watch?v=QP1Z4OWjTuA This video will teach you how to troubleshoot your gas dryer. My gas dryer would not heat up so I will show you the three main pieces in the front of the dryer that should be checked using an ohms meter. It is very easy to do and ANYONE can do this. Just to get this thing checked by a technician would cost $100. Then any parts, which are 4x the price you can get them at, plus $100 or more an hour for labor. By the time you are done, they will charge $250 to fix your dryer (half price for a brand new one). This job takes 1hr if you take your time, and the parts cost under $10. Here is where to get the multimeter tester: http://www.amazon.com/gp/product/B001O1X65A/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B001O1X65A&linkCode=as2&tag=chri0e2-20&linkId=L3A3XFVJXIFWVON7 Thermal fuse (Kenmore, Whirlpool): http://www.amazon.com/gp/product/B006H7HB7K/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B006H7HB7K&linkCode=as2&tag=chri0e2-20&linkId=EK7VLEGDDPZYT6JP Gas Solenoids (Kenmore, GE, Whirlpool): http://www.amazon.com/gp/product/B004XLDEAU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004XLDEAU&linkCode=as2&tag=chri0e2-20&linkId=W6K2NRUFS6AQIINJ **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Part 2: http://youtu.be/qGpojymCRNU How to troubleshoot your gas dryer, how to fix a gas dryer, gas dryer wont heat, fix a dryer that wont heat. My gas dryer would not heat up so I will show you the four main pieces in the rear of the dryer that should be checked using an ohms meter. It is very easy to do and ANYONE can do this. Just to get this thing checked by a technician would cost $100. Then any parts, which are 4x the price you can get them at, plus $100 or more an hour for labor. By the time you are done, they will charge $250 to fix your dryer (half price for a brand new one). This job takes 1hr if you take your time, and the parts cost under $10... Please like the video if it helped and comment if you have any questions at all. Here is where to get the multimeter tester: http://www.amazon.com/gp/product/B001O1X65A/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B001O1X65A&linkCode=as2&tag=chri0e2-20&linkId=L3A3XFVJXIFWVON7 Thermal fuse (Kenmore, Whirlpool): http://www.amazon.com/gp/product/B006H7HB7K/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B006H7HB7K&linkCode=as2&tag=chri0e2-20&linkId=EK7VLEGDDPZYT6JP Gas Solenoids (Kenmore, GE, Whirlpool): http://www.amazon.com/gp/product/B004XLDEAU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004XLDEAU&linkCode=as2&tag=chri0e2-20&linkId=W6K2NRUFS6AQIINJ **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

I took my truck, a 4x4 Mazda b3000 offroad in the Pine Barrens, NJ. There is a lot of soft sand, mud, muddy sand, steep hills, and puddles to navigate through which makes it a lot of fun! Lift Your Truck for Free via a T Bar Crank (torsion bar): https://www.youtube.com/watch?v=OZcxcqr5es8 Custom Offroad Lights: https://www.youtube.com/watch?v=w0ChnfrWy88 Inside the truck view of offroading: https://www.youtube.com/watch?v=FlsA1iYd2HE Snow Offroading: https://www.youtube.com/watch?v=QlSno8_I8GM **If the video was helpful, please give it a "thumbs up" and consider subscribing.** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 YouTube Channel: https://www.youtube.com/ChrisFix **New Video Every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This video shows how to change a water pump in a Jeep Wrangler straight 6cyl. This will work on any jeep from 1996-2005 with the 4.0 Inline 6. Can also be used for earlier jeeps as well. A bad waterpump will cause you to overheat and would make it difficult to continue driving. It is easy to replace the waterpump and watching this video should prove that to you. Any questions feel free to comment below. Here is the waterpump I used: http://www.amazon.com/gp/product/B000C2U77C/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000C2U77C&linkCode=as2&tag=chri0e2-20&linkId=ZOOI43KMESASNWLO **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This video shows how to change a belt in a 2004 Jeep Wrangler straight 6cyl. This will work on any jeep from 1996-2008 with the 4.0 Inline 6. Can also be used for earlier jeeps as well. Worn belts can lead to failure via snapping and this would make it difficult to continue driving. It is easy to replace the belt and watching this video should prove that to you. Belt replacement is the exact same process on the Jeep Rubicon. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This video shows how to change a thermostat in a 2004 Jeep Wrangler straight 6cyl. This will work on any jeep from 1996-2005 with the 4.0 Inline 6 engine. This can also be used for earlier jeeps as well. A bad thermostat will cause you to overheat and would make it difficult to continue driving. It is easy to replace the thermostat and watching this video should prove that to you. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Using a heat gun for faded plastic trim. This video shows how to turn your faded plastic trim on your car back to black. On my Ford Ranger, Mazda B3000 it has stayed black for 9 months of daily driving so it will last a while. It lasts longer than any restoring stuff I have used like back to black and armor all. Heat Gun I use: http://www.amazon.com/gp/product/B0053U2B8G/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0053U2B8G&linkCode=as2&tag=chri0e2-20&linkId=OSHHIS2MLUCWTURS Tire Shine that lasts a Year: https://www.youtube.com/watch?v=zDzIf4G8jkc **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to lift a truck. This video shows you how to lift your truck with torsion bars also known as a T bar lift. This tbar lift is done on a 2001 Mazda B3000 / Ford Ranger. You will need an alignment afterwards because of the angle change in the suspension. Tighten the tbar screw to lift the truck, loosen to lower the truck. I got a 1.5in lift and my C/V joint angle is only at a 5 degree angle so it should be fine with minimal wear. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to clean a throttle body and Idle air control valve (iac). This shows you how to fix a high idle, low idle, and or rough idle. Most modern cars have an idler air control valve (IAC) that can get gummed-up and you have to clean it. Be aware that unplugging the IAC can trigger a check engine light (use a scanner or disconnect the battery to get rid of the light). If you have any questions feel free to ask below. If this helps also let me know (I like to know when I help someone out!). Codes that can be triggered are, P0401, P0505, and P0507 IAC Cleaner: http://amzn.to/2iWJDma **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Soft gas pedal? A stretched out throttle cable in a Ford or Mazda can cause that.Take a look at your throttle cable. See if the pedal moves up and down and has "slack". If so, your throttle might not be opening all of the way so you are not getting full power. If you floor the car the throttle might only be open 80%. Watch the video to see how a few wire ties can restore this lost power! **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Brake Pad Replacement. This video shows you how to change the brake pads in a 95 Ford Windstar. This process will work for most fords, especially from the 90s. The basic brake change process is similar on most other cars. How to Replace Front and Rear Brake Pads and Rotors (complete guide): https://www.youtube.com/watch?v=lU6OKQxSg8U How to Replace Brake Pads and Rotors: https://www.youtube.com/watch?v=UlbFFq60Tec Drum Brake Replacement: https://www.youtube.com/watch?v=zJ_UXP6GWkw **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Iphone 6 Screen Protector Install. This is a quick video tutorial on how to perfectly apply a screen protector on your Ipad or Iphone. Watch out for any dust on your screen because that will cause bubbles in the end. Make sure you use plenty of spray. This particular screen protector is Armorsuit. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how you change the tail light bulb on a Ford Windstar. This process can work on other fords with the same/similar tail light assemblies. You can get a ticket for a blown out brake light so fix it right away, fast and easy. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn every step of how to change drum brakes. This drum brake replacement is specifically for a Ford Ranger pickup truck, but it applies to most other cars as well. YOU CAN DO THIS. No special tools required and it will save you a lot of money! After watching this video you can replace the drum brakes in your car! For the In-depth version of this video that goes into specifics follow this link: https://www.youtube.com/watch?v=3FYRwfKNHxw Replace the wheel cylinders: http://youtu.be/GIWYkCOPAQ0 Replace Different Brake Drums: https://www.youtube.com/watch?v=zJ_UXP6GWkw Drum Brake Spring Kit (inexpensive): http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=drum%20brake%20spring%20kit&linkCode=ur2&tag=chri0e2-20&url=search-alias%3Daps&linkId=BVZOZMYHKRSZIPYQ Drum Brake Tool (to make the job easier): http://www.amazon.com/gp/product/B00063V40G/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00063V40G&linkCode=as2&tag=chri0e2-20&linkId=FFXEI2NBVJ5BUL6A **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn every step of how to change drum brakes. This drum brake replacement is specifically for a Ford Ranger pickup truck, but it applies to most other cars as well. YOU CAN DO THIS. No special tools required and it will save you a lot of money! After watching this video you can replace the drum brakes in your car! Replace the wheel cylinders: http://youtu.be/GIWYkCOPAQ0 Replace Different Brake Drums: https://www.youtube.com/watch?v=zJ_UXP6GWkw Drum Brake Spring Kit (inexpensive): http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=drum%20brake%20spring%20kit&linkCode=ur2&tag=chri0e2-20&url=search-alias%3Daps&linkId=BVZOZMYHKRSZIPYQ Drum Brake Tool (to make the job easier): http://www.amazon.com/gp/product/B00063V40G/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00063V40G&linkCode=as2&tag=chri0e2-20&linkId=FFXEI2NBVJ5BUL6A **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This video shows you how to tell if your rear wheel drive car or truck has a limited slip differential, and also what gears it has. It is quick and all you do is read the tab on the differential pumpkin, or lift the rear and spin the tires... While moving one tire by hand, If the tires move in the same direction (or one doesnt move), it means that it is most likely a limited slip (posi traction) rear end. A limited slip rear uses a special additive to the gear oil when you do a gear-oil change, and it is necessary or damage could occur. An open differential (like the one in the video) does not use the special additive and the tires spin in opposite directions when one tire is spun. How to Change the Differential Fluid: https://www.youtube.com/watch?v=KmqMUJb-E4M **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Oil change. This video teaches you how to change your oil in your car or truck in less than five minutes. Changing oil is cheap and easy. Every 5000 miles you need to change your oil and oil filter. It can save you a bunch of money if you do it yourself and you know it gets done correctly. This is a Ford Ranger but the concept for every car is the same. Drain the oil, change the filter, put new oil in and that is all! COMPLETE Guide on How to Change your Car's Oil: https://www.youtube.com/watch?v=O1hF25Cowv8 Synthetic Oil I Recommend: http://amzn.to/1qt4Szo Tools I used: Copper Gasket: http://amzn.to/1EY27fK Oil Filter Pliers: http://amzn.to/1gFiBxy Oil Drain Pan: http://amzn.to/1MnqHqP Socket Set: http://amzn.to/1IMqPh2 Breaker Bar: http://amzn.to/1La303D Race Ramps: http://amzn.to/1TBOxzz Car Ramps: http://amzn.to/1IMqYB6 Jack: http://amzn.to/1MnqO5D Jack Stands: http://amzn.to/1gFjbvv 300k Mile Oil Change: https://www.youtube.com/watch?v=oIG_BdsffcU Transmission Fluid Change: https://www.youtube.com/watch?v=yb_1wbiPz9g Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to diagnose and fix a blown out license plate light. The bulb in this truck was visually burnt out, but that doesnt always happen. Sometimes the light looks fine and really needs to be tested with a multimeter. If the light is not blown out then you have to see if there is current getting to the light socket. **If the video helped, please give it a "thumbs up" and consider subscribing. Leave any questions or comments below and I will answer them as well.** Follow me on Facebook: https://www.facebook.com/chrisfix8 Follow me on Twitter: https://twitter.com/ChrisFixed Subscribe: http://www.youtube.com/subscription_center?add_user=paintballoo7 Light, License plate, license plate light, fixing a tail light, diagnose a rear tail light, how to fix your tail light, how to replace a rear light bulb, replace a license plate bulb, license plate bulb, using a multimeter to see check your lights, license plate light bulb, Disclaimer: Due to factors beyond the control of ChrisFix, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ChrisFix recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ChrisFix.

Here are minnows, the gulf killi fish, hatching under the microscope. In the wild they lay their eggs on marsh grasses at a full moon high tide and then 30 days later when the next full moon high tide comes they get wet and hatch. Any questions or comments feel free to ask below! Toadfish Eggs Hatching: https://www.youtube.com/watch?v=9fPfH4ChsoA **If the video was enjoyable, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix

Learn how to change the spark plugs and wires in a C4 Corvette with an LT1 or LT4 from 1992 through 1996. This is a job the every day person can do and save yourself some money! This also applies to the LT1 and LT4 Camaro, Impala, Caprice, etc. How to Gap the Spark Plug: https://www.youtube.com/watch?v=IuW3svdqKZM **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to correctly gap a spark plug. This is a fast and easy video on how to gap a spark plug and spark plug gap adjustment. All plugs have to be checked and a gap tool is $1. Incorrect plug gap can lead to poor performance and poor fuel economy. Platinum plugs have a recommended replacement every 50-100k miles depending on your vehicle and use... Copper plugs have a recommended replacement every 30k miles or so. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Watch a minnow trap catching killifish in a salt marsh pond. The fish caught are mummichogs which are very hardy and are used as a baitfish all the time. The bait inside the trap is the end piece of bread. You can see once one fish goes in, the rest start to follow. The more fish that move into the trap, the more that are willing to follow behind them! The trap I use is GEE'S Galvanized Minnow Trap which is the original trap patented in 1903 and is made in the USA. The quality is the best out there and they last way longer than other traps on the market! Click here to watch me catching Cocahoe minnows POV in Louisiana! https://www.youtube.com/watch?v=dr3StNw-4dM Catching fish in the minnow trap in a marsh creek: https://www.youtube.com/watch?v=KJjM4j6CBi8 Catching minnows UNDER ICE!! https://www.youtube.com/watch?v=a75e3E0oca8 Click the link to see these minnows hatching in the lab! https://www.youtube.com/watch?v=T3SUvDmIYhw **If the video was enjoyable, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix

Offroad Spot Lights. So here are my inexpensive, $27 a pair, Harbor Freight, offroad lights. They are a great deal and really light up the road. I first show how they are set up (during the day) and then I show how they look at night and compare them to the normal headlights. Here is my newest video series on building and wiring an LED Light Bar which is 40,000 lumens: Project Night light Episode 1: https://www.youtube.com/watch?v=qp9L00SMSHQ Project night Light Episode 2: https://www.youtube.com/watch?v=Amc-BfSh25E How to Wire and LED Light Bar: https://www.youtube.com/watch?v=b8GY69Ci7l4 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace an alternator in a car. This alternator replacement will be similar for almost any car and if you have access to the bolts, it is easy! Some alternators are buried and take a little more time to get to but the process is the same as in this Ford Windstar. How to test your alternator to see if it is bad: https://www.youtube.com/watch?v=LGB6ZEjGm7Q Here is where you can get inexpensive alternators: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=alternator&linkCode=ur2&sprefix=alternator%2Cautomotive%2C238&tag=chri0e2-20&url=search-alias%3Dautomotive&linkId=256IBD2HVDMS77BS **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to tint car windows. Learn the process of how to tint car windows yourself. The tints in this video are still looking great 5+ years later! You will need: -tint -Spray bottle with soapy water (dawn) -microfiber towel -razor (box cutter) to cut tint -credit card or something similar wrapped in duct tape **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Fix a cracked or chipped windshield yourself. If you do not fix a chip in the glass as soon as possible the chip can turn into a crack overnight! It is easy and costs $10. A repair place will charge about $75 to fix the chip and a windshield can cost you over $500 to replace. This short diy video will save you time, money, and frustration! Here is where I got the window repair kit: http://www.amazon.com/gp/product/B000ALJ4MY/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000ALJ4MY&linkCode=as2&tag=chri0e2-20&linkId=AOYZGWZWWBAHP4OR This came out WAY Better: https://www.youtube.com/watch?v=QjuWqBzO7qY Here is another chip repair video using a different kit: https://www.youtube.com/watch?v=YK1kpSZpMPM How to Super Clean a Windshield: https://www.youtube.com/watch?v=vJkfrY2owb0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to easily put in a new radio in a Mazda B3000, Ford Explorer, and Ford Ranger. I had a short in my radio so for my replacement I went from a CD player to a Cassette so I can plug my phone into the radio. This is a double din radio. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to fix C4 Corvette Headlights that wont go up or down. This video will show you how to take off the headlight assembly, take off the headlight motor, and change out your worn gear with a nice new one If your headlights are not going up, or it goes up but easily falls back down, this is what you need to do to fix it. Plastic gear and bushings (good price and all you need): http://amzn.to/28LvpAX Bronze gear and bushings: http://amzn.to/28Lvp47 This is really easy to do and it will save you a lot of money. The dealer wanted $400 per light. This takes an hour each light if you take your time! **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This video shows how to clean a blue claw crab (Callinectes sapidus). -Please put your crabs in ice water to numb them so this is as humane as possible. Then just follow what is done in the video. It is easy... There is a recipe at the end of the video and below: water vinegar 1 dozen live blue crabs 1/2 cup OLD BAY Seasoning DIRECTIONS (from the old bay website) In a pot with a raised rack (minimum of 2 inches high), add equal quantities of water and vinegar to just below level of rack. Bring to a boil. Carefully layer crabs on rack; sprinkle each layer with OLD BAY. Cover and steam for about 10 minutes depending on size of crabs or until crabs turn red. **If the video helped, please give it a "thumbs up" and consider subscribing.** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This is an underwater (fish-eye) view of a few different fishing lures. I look at a buzz bait, rapala, jointed rapala, chatter bait, spoon, jitterbug, plastic grub, plastic worm, cicada, spinner, willow leaf spinner, inline spinner, etc. I caught my largest largemouth bass, an 8lb bass, on the jitterbug. **If the video was neat, please give it a "thumbs up" and consider subscribing.** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Watching sand crabs aka sand fleas burrow in the sand. Sandcrabs are a great bait for permit, pompano, flounder, striped bass, and other coastal fishes. They can be caught by digging near the waterline where the ocean meets the beach and the waves wash over. Just dig about 8in into the sand. Look for disturbances in the sand such as mounds, holes, and valleys. Sand crabs are also called sand fleas, and mole crabs. Sand Fleas are crusteceans and feed on plankton. They have the largest sensory neurons found in any animal. Sand crabs spawn in the spring and summer and can lay as many as 45k eggs. When the eggs hatch, the baby sand crabs travel via ocean currents for many miles over 30 days. Mole crabs live about 2-3 years. Scientific Name: Emerita talpoida

A bunch of Vettes met up for the first time of the year. We cruised around a little and it was nice hearing the rumble of each Vette. There was an awesome supercharged Vette, a sick Lingenfelter Z06, a clean C4, and many other awesome Vettes Here are some of the beasts on the dyno! Supercharged Grand Sport: https://www.youtube.com/watch?v=xr4pM3PvHS8 All Motor Z06: https://www.youtube.com/watch?v=eRVjEpHpBSY All Motor 427 C5: https://www.youtube.com/watch?v=Lz_ZKyK8bfU INSANE Supercharged/NOS Camaro: https://www.youtube.com/watch?v=oP_tUjj5JTA **If the video was enjoyable, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to change the motor oil in a Chevy Corvette. Here is the ramps I used: http://www.amazon.com/gp/product/B003ZAHTC4/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B003ZAHTC4&linkCode=as2&tag=chri0e2-20&linkId=QLJXBMMQLCHWHKZB **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to change your motor oil on any car. I am working on a Chrysler PT Cruiser. Anyone with the tools listed in the beginning of the video can do this. It is a good way to save some money and make sure the job is done properly. Changing oil is basic maintenance that every car needs. Every 5000 miles an oil change needs to be done. You change the oil with the oil recommended in your owners manual as well as an oil filter. **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This video shows how to change windshield wipers. While it may seem simple, it is a good reference so when you change yours it is an easy process (especially if it is raining outside). The sample vehicle is a 2002 Pt Cruiser but the same method will work for any car that has a U shaped wiper blade arm. Most Dodge, Chrysler, Chevy, Ford, Honda, Toyota, and Nissan cars will have a similar if not the same procedure. Here is where I get cheap wiper blades: http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&field-keywords=wiper%20blades&linkCode=ur2&tag=chri0e2-20&url=search-alias%3Daps&linkId=FOMX5D7K45OZFTCK **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to replace your rear brakes. This video will show you how to replace brake pads on rear disc brakes. It takes 30 min to do both disc brakes and is really easy. Brake pads cost $30 and all you need are some wrenches, c-clamps, and a jack to lift the car. ANYONE CAN DO THIS!!! This procedure will be similar on most dodge and Chrysler cars such as the dodge neon, dodge caliber, Chrysler intrepid, etc. Here is how to change drum brakes: here:https://www.youtube.com/watch?v=pVrLURF7Spk How to Flush Brakes: https://www.youtube.com/watch?v=n1NvtUwfRJc How to replace brake pads and rotors: https://www.youtube.com/watch?v=UlbFFq60Tec **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Learn how to change a fuel pressure regulator on 350ci LT1 or LT4 engine. Replacing the fuel pressure regulator (fpr) is a similar process for almost all cars and this video is a great reference! Here is the fuel pressure regulator I used (good price too): http://www.amazon.com/gp/product/B000C9JXSY/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000C9JXSY&linkCode=as2&tag=chri0e2-20&linkId=WDX3D6POYJZKJQMJ Here is how to test your fuel pressure regulator: https://www.youtube.com/watch?v=_oXLUqE4Sf0 **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Loud C5 Corvette Exhaust. This is my friends loud C5 corvette with headers and borla straight pipes! This exhaust is very loud! One of the best sounding Corvettes I have ever heard! LOUD C5 Z06 Exhaust: https://www.youtube.com/watch?v=e9yZwDcrzik Kid runs from LOUD Vette Exhaust: https://www.youtube.com/watch?v=WF_GCDG6Atw Corvette Meet (all different exhaust sounds in a parking garage!): https://www.youtube.com/watch?v=DpWErJC5kZA **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

This is a C5 Z06 Corvette exhaust sound. You get to hear the Vette rev its engine during a contest for the loudest Corvette! It is running straight pipes into borla mufflers (pretty much straight pipes). Deep C5 Exhaust: https://www.youtube.com/watch?v=D1OhJAP1qgc Kid runs from LOUD Vette Exhaust: https://www.youtube.com/watch?v=WF_GCDG6Atw Corvette Meet (all different exhaust sounds in a parking garage!) https://www.youtube.com/watch?v=DpWErJC5kZA **If the video was enjoyable, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 YouTube Channel: https://www.youtube.com/ChrisFix

Listen to this ZR1 rev its engine. It has a completely built LT5 and is port and polished as well as tuned! It has headers and a corsa exhaust and is just so clean! It makes 505hp to the crank. -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Corvette Exhaust. This loud C6 carbon fiber corvette won the exhaust contest. Almost maxed the decibel meter! Deep C5 Exhaust: https://www.youtube.com/watch?v=D1OhJAP1qgc C5 Z06 Exhaust: https://www.youtube.com/watch?v=e9yZwDcrzik Corvette Meet (all different exhaust sounds in a parking garage!): https://www.youtube.com/watch?v=DpWErJC5kZA **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How to replace the water pump on an LT1 or LT4 engine in a C4 Corvette, Impala, Camaro, Impalaetc. I go through each step showing how to remove the water pump and properly put on a new water pump so you do not have any leaks. How to change the headlight gear in a Corvette: https://www.youtube.com/watch?v=sPj1kJm4AnU **If the video was helpful, please give it a "thumbs up" and consider subscribing.** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 YouTube Channel: https://www.youtube.com/ChrisFix **New Video Every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

My 96 LT1 Z51 Corvette along with others from the Toys for Tots Run in Atlantic City. Hear the amazing sounds of all types and years of Vettes, and specifically my 96 Vette with the stock exhaust! There were over 1000 Corvettes bringing toys to children for Christmas. It was a lot of fun to see and hear all of the amazing Vettes! Here are links to some crazy loud and great sounding Vettes: Z06 Meet (some of the nastiest Vettes out there!) https://www.youtube.com/watch?v=DpWErJC5kZA C5 Straight Pipes! https://www.youtube.com/watch?v=D1OhJAP1qgc Earth-shaking Z06 https://www.youtube.com/watch?v=e9yZwDcrzik